INSTALLATION INSTRUCTIONS

For detailed instructions related to product installation, see the CA Performance Management documentation at wiki.ca.com/capm.

OVERVIEW for 2.6.0_Dec_Update (Back to DESCRIPTION)

2.6.0_Dec_Update provides fixes and enhancements to pre-existing functionality.
Please refer to the "DETAILS OF CONTENTS" section below for full descriptions of these fixes and enhancements.

DETAILS OF CONTENTS

Resolved Issues (Back to OVERVIEW for 2.6.0_Dec_Update)


• Symptom: Under certain circumstances the Monitored Devices Details view displayed an incorrect device "Status:"
  The problem can manifest itself by indicating UP when the device is really down, or DOWN when the device is UP.
  For manageable devices, MANAGEMENT_LOST also could be incorrectly displayed. The polled data displayed in Dashboards was not affected by this incorrect Status
  
  Resolution: The Device Details Status value for a device will accurately represent whether the Data Collector was able to ping or poll (UP) a network device, or whether the device was unavailable (DOWN). Enhanced DEBUG logging to provide additional detail/clarity if needed.
  (2.6.0_Dec_Update, DE48365, 00207219,00077823,00253502)
  

OVERVIEW for 2.6.0_Nov_Update (Back to DESCRIPTION)

2.6.0_Nov_Update provides fixes and enhancements to pre-existing functionality.
Please refer to the "DETAILS OF CONTENTS" section below for full descriptions of these fixes and enhancements.

DETAILS OF CONTENTS

Resolved Issues (Back to OVERVIEW for 2.6.0_Nov_Update)


• Symptom: The Open API could consume large amounts of memory during the schema synchronization task that could be triggered by changes in environment. This may lead to a performance degradation of the Data Aggregator.
  Resolution:
  The OpenAPI schema synchronization task has been re-worked to improve Data Aggregator performance.
  
  (2.6.0_Nov_Update, DE48618)
  


• Symptom: After attempting to poll Cisco Response Path tests on a device with multiple tests, polled devices may experience a rise in CPU usage and polled data may be missing on one or more Response Path test components. This is caused only seen if the Response Path tests on the router have indexes similar to the following - Test 1 followed by test 100. If there were any other index in between, then the issue would not occur.
  Resolution: Fixed the flaw in polling Cisco Response Path tests, so that the correct bucket will be discovered irrespective of the indexes of the tests on the device and polled data will be collected.
  
  (2.6.0_Nov_Update, DE48783, 00218524,00214425)
  

OVERVIEW for 2.6.0_Oct_Update (Back to DESCRIPTION)

2.6.0_Oct_Update provides fixes and enhancements to pre-existing functionality.
Please refer to the "DETAILS OF CONTENTS" section below for full descriptions of these fixes and enhancements.

DETAILS OF CONTENTS

Resolved Issues (Back to OVERVIEW for 2.6.0_Oct_Update)


• Symptom: When using NFA or ADA as a data source, CAPC Trend view sometimes renders all samples "compressed" into the left quarter or third of the graph.  This typically occurs for time ranges that result in a 2, 3, or 4 hr resolution, such as "14 Days" time range.
  Resolution: CAPC Trend view applies the resolution supplied by the Data source when rendering data with less common resolutions like 2, 3, or 4 hr resolution, and the trend lines fill the full width of the graph.
  (2.6.0_Oct_Update, DE46972, 00057077)
  


• Symptom: The typecatalog web service rejects a vendor certification that contains any expression using the standard "_rspTimestamp" variable.
  Resolution: Updated vendor certification validation code to allow the standard "_rspTimestamp" variable.
  (2.6.0_Oct_Update, DE47955)
  


• Symptom: Data Aggregator may fail to sync interfaces to Performance Center if the port item's 'IndexList' attribute contains blank or empty entries.
  Resolution: Data Aggregator can sync interfaces to Performance Center as long as they have at least one valid index in their 'IndexList' attribute.
  (2.6.0_Oct_Update, DE48398, 00208713)
  

QUICK REFERENCE TABLE

Fixed in	Work Item	Support Ticket(s)
2.6.0_Dec_Update	DE48365	00207219,00077823,00253502
2.6.0_Nov_Update	DE48618
2.6.0_Nov_Update	DE48783	00218524,00214425
2.6.0_Oct_Update	DE46972	00057077
2.6.0_Oct_Update	DE47955
2.6.0_Oct_Update	DE48398	00208713




Copyright © 2015 CA Technologies, Inc. All rights reserved.