Skip navigation
All Places > CA Unified Infrastructure Management > Blog > 2018 > August

CA is pleased to announce the general availability of the Device Certification Deployer, DCD 2.2, for CA UIM SNMP Collector. Starting with DCD 1.1, CA UIM customers no longer need to receive new device certifications via a SNMP Collector GA distribution.  Instead, our Unified Device Certification team delivers new and updated SNMP device certs via the Device Certification Deployer. Our independent DCD release schedule offers CA UIM SNMP Collector #users a simple and more expedient way to add support to monitor and manage a broader range of vendor device models.


IMPORTANT NOTE: DCD 2.2 requires SNMP Collector 3.21 or above.


Added Certification Enhancements for the following devices:

  • Alcatel-Lucent Omni PCX
  • Aruba Networks 2530 24 PoE Switch (J9779A) 16.5
  • Aruba Networks 2530 8G PoE Switch (J9774A) 16.4
  • Aruba Networks 2540 48G PoE 4SFP (JL357A)
  • Aruba Networks 2930F 48G 4SFP (JL260A) 16.5
  • Aruba Networks 2930F 48G 4SFP (JL259A) 16.5
  • Blue Coat System SA-10G-26T-G6 3.10.94
  • Brocade VDX 6740 6.0.1
  • Check Point 21400 2.6.18
  • Cisco ASA 5508 9.4.14
  • Cisco ASA 5585 Ssp 40 9.8
  • Cisco Cat 4507 rpluse 15
  • Cisco Cat 6509 12.2
  • Cisco Cat 6509 15.4
  • Cisco Cat 6807-XL 15.4
  • Cisco Cat 6840-X 15.2
  • Cisco CSR1000v 16.6.2
  • Cisco GSS 4490
  • Cisco UCS C220 M4 2.0
  • Citrix Systems Netscaler 10.5
  • D-Link DGS-1210-48/A1 2.01.002
  • EqualLogic PS 6100 XV
  • F5 Networks BIG IP 3600 2.6.32
  • Fortinet FortiDDoS 900B
  • Gigamon VUE - HC2 2.6.34
  • Hitachi NAS 13.2.4527
  • Hitachi Quanta D51B-2U 4.9.36
  • McAfee IPS-NS9200
  • Oracle Network 10GE Switch
  • Sophos SG 310


Please check out the links below for more information about the new Device Certification Deployer for SNMP Collector.  

More Information


Where can I read more about DCD 2.2? 
Read more about the Device Certification Deployer, including a list of newly supported device models and enhanced certifications at our UIM Vendor Certifications page


How do I apply DCD 1.x or 2.x to SNMP Collector? 

Find instructions for deploying DCD 2.2 to SNMP Collector 3.21 or above here: device_certification_deployer


How do I request new certification of my SNMP device for a future DCD release?

 In order to request a new device cert, all one needs to do is to provide a complete SNMP walk (using SAPro) from the device model that will need to be monitored as configured and the manufacturer's MIB file along with any specific OID, statistic, or metric requirement info via a new SNMP Collector Support ticket.  Support opens the request for development in the next available DCD release.


qinzu01 potju03