Skip navigation
All Places > CA Unified Infrastructure Management > Blog > Authors RajeevKurupati

We are pleased to announce the general availability of the Device Certification Deployer, DCD 2.4 for UIM SNMP Collector. Starting with DCD 1.1, UIM customers no longer need to receive new device certifications via a SNMP Collector GA distribution.  Instead, our Unified Device Certification team delivers new and updated SNMP device certs via the Device Certification Deployer. Our independent DCD release schedule offers UIM SNMP Collector #users a simple and more expedient way to add support to monitor and manage a broader range of vendor device models.

 

Note: DCD 2.4 requires SNMP Collector 3.21 or above.

 

Added Certification Enhancements for the following devices:

  • Alcatel-Lucent 7750 SR 12 14.0
  • Alcatel-Lucent 7750 SR 14 15.0.R9
  • Brocade DCX-4S
  • Brocade Fibre Channel Switch
  • Check Point 12200 2.6.18
  • Cisco Catalyst 4500 3.8.1
  • Cisco Cev Chassis 5000 7.1
  • Cisco Nexus 9372PX-E 7.0.3
  • Citrix Systems Netscaler 12.1
  • Enterasys Networks C5 G124x48P2 6.81.8
  • Fortinet FGT 1200 D
  • Hitachi RAID 600, RAID 700
  • Huawei OceanStor Dorado 2600 V3 V300R006C10
  • Huawei OceanStor Dorado 3900 V300R002C10
  • Huawei OceanStor Dorado 5500 V3 V300R002C10
  • Huawei OceanStor Dorado 6000 V3 V300R001C21
  • Loop Telecommunication International AM3440-A
  • Nokia IP 560 6.2

 

Please check out the links below for more information about the new Device Certification Deployer for SNMP Collector.  

More Information

 

Where can I read more about DCD 2.4? 
Read more about the Device Certification Deployer, including a list of newly supported device models and enhanced certifications at our UIM Vendor Certifications page

 

How do I apply DCD 1.x or 2.x to SNMP Collector? 

Find instructions for deploying DCD 2.3 to SNMP Collector 3.21 or above here: device_certification_deployer

 

How do I request new certification of my SNMP device for a future DCD release?

 In order to request a new device cert, all one needs to do is to provide a complete SNMP walk (using SAPro) from the device model that will need to be monitored as configured and the manufacturer's MIB file along with any specific OID, statistic, or metric requirement info via a new SNMP Collector Support ticket.  Support opens the request for development in the next available DCD release.

 

potju03qinzu01

CA is pleased to announce the general availability of the Device Certification Deployer, DCD 2.3, for CA UIM SNMP Collector. Starting with DCD 1.1, CA UIM customers no longer need to receive new device certifications via a SNMP Collector GA distribution.  Instead, our Unified Device Certification team delivers new and updated SNMP device certs via the Device Certification Deployer. Our independent DCD release schedule offers CA UIM SNMP Collector #users a simple and more expedient way to add support to monitor and manage a broader range of vendor device models.

 

Note: DCD 2.3 requires SNMP Collector 3.21 or above.

 

Added Certification Enhancements for the following devices:

  • Cisco ISR 2911 15.5
  • Cisco Catalyst 6509 15.4
  • Cisco ISR 4451 15.5
  • Citrix Systems Netscaler 12.0
  • Citrix Systems Netscaler 12.1
  • F5 Networks BIG-IP i2800 12.1.3.4
  • Fortinet FGT 1200 D
  • Fortinet FGT 3000
  • Hitachi RAID 500
  • Huawei OceanStor Dorado 6000 V3 V300R001C30
  • Huawei OceanStor 5800 V5 V500R007C20
  • Huawei OceanStor 5600 V3 V300R006C21
  • nCipher PLC nShield Connect 500 6.2
  • HP ArcSight 2.8
  • McAfee Network Security IPS-NS9200
  • Powerware x UPS 4.20

 

Please check out the links below for more information about the new Device Certification Deployer for SNMP Collector.  

More Information

 

Where can I read more about DCD 2.3? 
Read more about the Device Certification Deployer, including a list of newly supported device models and enhanced certifications at our UIM Vendor Certifications page

 

How do I apply DCD 1.x or 2.x to SNMP Collector? 

Find instructions for deploying DCD 2.3 to SNMP Collector 3.21 or above here: device_certification_deployer

 

How do I request new certification of my SNMP device for a future DCD release?

 In order to request a new device cert, all one needs to do is to provide a complete SNMP walk (using SAPro) from the device model that will need to be monitored as configured and the manufacturer's MIB file along with any specific OID, statistic, or metric requirement info via a new SNMP Collector Support ticket.  Support opens the request for development in the next available DCD release.

 

potju03qinzu01

CA is pleased to announce the general availability of the Device Certification Deployer, DCD 2.2, for CA UIM SNMP Collector. Starting with DCD 1.1, CA UIM customers no longer need to receive new device certifications via a SNMP Collector GA distribution.  Instead, our Unified Device Certification team delivers new and updated SNMP device certs via the Device Certification Deployer. Our independent DCD release schedule offers CA UIM SNMP Collector #users a simple and more expedient way to add support to monitor and manage a broader range of vendor device models.

 

IMPORTANT NOTE: DCD 2.2 requires SNMP Collector 3.21 or above.

 

Added Certification Enhancements for the following devices:

  • Alcatel-Lucent Omni PCX
  • Aruba Networks 2530 24 PoE Switch (J9779A) 16.5
  • Aruba Networks 2530 8G PoE Switch (J9774A) 16.4
  • Aruba Networks 2540 48G PoE 4SFP (JL357A)
  • Aruba Networks 2930F 48G 4SFP (JL260A) 16.5
  • Aruba Networks 2930F 48G 4SFP (JL259A) 16.5
  • Blue Coat System SA-10G-26T-G6 3.10.94
  • Brocade VDX 6740 6.0.1
  • Check Point 21400 2.6.18
  • Cisco ASA 5508 9.4.14
  • Cisco ASA 5585 Ssp 40 9.8
  • Cisco Cat 4507 rpluse 15
  • Cisco Cat 6509 12.2
  • Cisco Cat 6509 15.4
  • Cisco Cat 6807-XL 15.4
  • Cisco Cat 6840-X 15.2
  • Cisco CSR1000v 16.6.2
  • Cisco GSS 4490
  • Cisco UCS C220 M4 2.0
  • Citrix Systems Netscaler 10.5
  • D-Link DGS-1210-48/A1 2.01.002
  • EqualLogic PS 6100 XV
  • F5 Networks BIG IP 3600 2.6.32
  • Fortinet FortiDDoS 900B
  • Gigamon VUE - HC2 2.6.34
  • Hitachi NAS 13.2.4527
  • Hitachi Quanta D51B-2U 4.9.36
  • McAfee IPS-NS9200
  • Oracle Network 10GE Switch 3.0.5.2
  • Sophos SG 310

 

Please check out the links below for more information about the new Device Certification Deployer for SNMP Collector.  

More Information

 

Where can I read more about DCD 2.2? 
Read more about the Device Certification Deployer, including a list of newly supported device models and enhanced certifications at our UIM Vendor Certifications page

 

How do I apply DCD 1.x or 2.x to SNMP Collector? 

Find instructions for deploying DCD 2.2 to SNMP Collector 3.21 or above here: device_certification_deployer

 

How do I request new certification of my SNMP device for a future DCD release?

 In order to request a new device cert, all one needs to do is to provide a complete SNMP walk (using SAPro) from the device model that will need to be monitored as configured and the manufacturer's MIB file along with any specific OID, statistic, or metric requirement info via a new SNMP Collector Support ticket.  Support opens the request for development in the next available DCD release.

 

qinzu01 potju03  

CA is pleased to announce the general availability of the Device Certification Deployer, DCD 2.1, for CA UIM SNMP Collector. Starting with DCD 1.1, CA UIM customers no longer need to receive new device certifications via a SNMP Collector GA distribution.  Instead, our Unified Device Certification team delivers new and updated SNMP device certs via the Device Certification Deployer. Our independent DCD release schedule offers CA UIM SNMP Collector #users a simple and more expedient way to add support to monitor and manage a broader range of vendor device models.

 

IMPORTANT NOTE: DCD 2.1 requires SNMP Collector 3.21 or above.

 

Added Certification Enhancements for the following devices:

  • Alcatel 7750 SR 12 14.0
  • Arbor Networks APS2600-5
  • Broadcom EdgeSwitch 1.1.0
  • Brocade Fibre Channel Switch
  • Cisco 8540 WLC
  • Cisco Catalyst 6509 12.2
  • Cisco Catalyst 6506 15.4
  • Cisco Meraki Cloud Controller
  • Citrix Netscaler 10.1
  • Dell 1655 MC
  • Dell Networking N3048P 6.3.2.3
  • Dell Networking N4032F 6.3.2.3
  • Dell Power Connect 8132 5.1.1.7
  • Dell PowerEdge iDRAC7
  • Dell PowerVault MD32xxi
  • Fortinet FWC 500d
  • Hitachi Storage HDS HPP
  • HP C6600 Arcsight manager 2.6.1.2041
  • HP L7600 Arcsight Logger 6.4.1.8132
  • Huawei OceanStor 9000 Series
  • McAfee IPS-NS9100
  • McAfee NS9100
  • Oracle SAN switch probe 5.11
  • Oracle ZFS Storage Probe 5.11
  • Palo Alto Networks PA-3020
  • Polycom RPG 500
  • Quanta Storage 2.6.28

 

Please check out the links below for more information about the new Device Certification Deployer for SNMP Collector.  

More Information

 

Where can I read more about DCD 2.1? 
Read more about the Device Certification Deployer, including a list of newly supported device models and enhanced certifications at our UIM Vendor Certifications page

 

How do I apply DCD 1.x or 2.x to SNMP Collector? 

Find instructions for deploying DCD 2.1 to SNMP Collector 3.21 or above here: device_certification_deployer

 

How do I request new certification of my SNMP device for a future DCD release?

 In order to request a new device cert, all one needs to do is to provide a complete SNMP walk (using SAPro) from the device model that will need to be monitored as configured and the manufacturer's MIB file along with any specific OID, statistic, or metric requirement info via a new SNMP Collector Support ticket.  Support opens the request for development in the next available DCD release.

 

qinzu01 potju03  sensu04