If you only want to monitor the applications that you explicitly define, you can now turn off system-applications. By default, the management console automatically creates system-defined applications to monitor TCP sessions on all application ports and servers, across all client networks. If you do not want system-defined applications and servers, and you only want to monitor the applications and servers that you define, modify each CA monitoring device. On a: CA Standard or Virtual Monitor Create a new file in the drive:\CA\bin folder named saConfigInterfaceRuntimeOptions.ini. Add the following line to the file: /force positive config Restart the CA ADA Monitor service to apply your changes. Repeat this procedure on each CA Standard and Virtual Monitor. CA Multi-Port Monitor Create a new file in the /opt/NetQoS/bin folder named saConfigInterfaceRuntimeOptions.ini. The file name is case-sensitive. Add the following line to the file: -force positive config Restart the nqmetricd daemon to apply your changes. Repeat this procedure on each CA Multi-Port Monitor.
This document was generated from the following discussion: The specified item was not found.