Tech tips - UIM Knowledge Base articles published in August 2017

Document created by PeteBennett Employee on Sep 4, 2017
Version 1Show Document
  • View in full screen mode

APACHE PROBE IS NOT GETTING ANY QOS METRICS OR ALARMS 
We configured the 'apache' probe to fetch various metrics. However, the QOS tables are empty or have NULL values for the 'SAMPLEVALUE'. 
LAST UPDATE: 2017-08-31    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1878059

VMAX PROBE METRIC QOS_STORAGE_SYMM_MEM_WP_MAX_PERCENT IS RETURNING 0 VALUES CONSISTENTLY 
VMAX probe Metric QOS_STORAGE_SYMM_MEM_WP_MAX_PERCENT is returning 0 values consistently and we see the following error in the log vmax.log file: ERROR Error while processing 'symstat -type MEMIO -sid 000195700853 -i 90 overwrite -c 1 -out xml' com.bt
LAST UPDATE: 2017-08-31    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1734058

THE SDGTW PROBE IS FAILING TO CREATE TICKETS IN SERVICE NOW. ALARM: INCIDENT CREATION TAKING LONG. SEEMS SOME ISSUE AT SERVICE DESK SIDE PLEASE INVESTIGATE.SUPP KEY ISSDGTW-DESK 
After navigating from the sngtw to the sdgtw probe, incident creation does not always happen or we get alarms: Incident creation taking long. seems some issue at Service desk side please investigate... The sdgtw log shows: All threads are busy processing 
LAST UPDATE: 2017-08-31    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1913104

UNABLE TO CONNECT TO UIM SERVICES TO ACCESS GROUPSERVICE AND COMPUTERSYSTEMSERVICE 
We received a critical alert with the message "Unable to connect to uim services to access GroupService and ComputerSystemService" from health_index probe. Could you please check and let me know further about this alert. UIM - 8.51 Hub- 7.91 
LAST UPDATE: 2017-08-31    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1138103

POSTGRESQL CLIENT QUERIES 
What privileges are required for the postgres user? What is the overhead involved in stats collection?
LAST UPDATE: 2017-08-31    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1932152

AFTER DEPLOYING UIM_AWS_DASHBOARDS_PACK, WE ARE STILL NOT ABLE TO SEE THE REPORT AWS SUMMARY - ERROR NO DASHBOARD FOUND WITH THIS PATH 
After deploying uim_aws_dashboards_pack, we are still not able to see the report AWS Summary. This may also happen for other cabi dashboard likes the azure dashboards, the error returned is: no dashboard found with this path
LAST UPDATE: 2017-08-30    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1306125

HOW DO I CHANGE THE ADDRESS TO ADMIN CONSOLE IN USM? 
Steps to change the address that the USM "Admin Console" link points to.
LAST UPDATE: 2017-08-30    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1610516

NAME INSTEAD OF IP IN ICMP PROBE. 
How to display the hostname in ICMP probe in UMP server.
LAST UPDATE: 2017-08-30    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1954102

HOW CDM PROBE CALCULATES PAGING ACTIVITY ON A LINUX BASED SYSTEM 
This TEC document provides information on how the cdm probes calculates the paging data for linux systems
LAST UPDATE: 2017-08-30    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1534908

HOW TO SET DISK SPACE ALERTING BASED ON SIZE RATHER THAN PERCENT WHEN DEPLOYING CDM PROBE? 
This article is about apply same disk size threshold for different disk size in an automated manner
LAST UPDATE: 2017-08-30    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1654514

WHICH UIM PROBES ARE AGENT OR AGENTLESS? 
This is UIM probe list including agent or agentless information.
LAST UPDATE: 2017-08-30    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1064105

SOME SNMPCOLLECTOR DEVICES DO NOT SHOW ALL METRICS IN USM 
For some of my systems I receive QOS only from internal interfaces, ie: gre, ipip, lsi, mtun, pimd and pime but all the gigabit and 10 gigabit ethernet ports are missing. 
LAST UPDATE: 2017-08-29    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1832076

SCHEDULED UNFIED REPORTS DO NOT FIRE ON SCHEDULE 
We have a number of reports scheduled to run around the same time Sunday evening. Infrequently, some of those reports do not run or we see that the output file is not received in our email.
LAST UPDATE: 2017-08-29    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1461311

CABI PROBE V3.0 DEPLOYMENT PROBLEMS 
The cabi probe (v3.0) deployed however, it didn’t extract any files or even attempt the jaspersoft installation. The cabi wasp probe also does not start and is in an error state (no port or pid). Also, no /c/ folder or tables in db.
LAST UPDATE: 2017-08-25    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1246966

THE PROBEDISCOVERY QUEUE IS QUEUING UP WITH THESE MESSAGES IN THE DISCOVERY_SERVER LOG FILE: WAITING TO OBTAIN UDM DATABASE CONNECTION PROPERTIES: (11) COMMAND NOT FOUND 
The discovery_server is queuing up. The discovery_server.log is flooded with the following error messages:20 Aug 2017 21:02:08,368 [main] WARN com.nimsoft.udm.utilities.nimbus.UdmConnectionLookup - Waiting to obtain UDM database connection properties: 
LAST UPDATE: 2017-08-24    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1606127

VMWARE PROBE TEMPLATES ARE NOT APPLYING TO ALL SYSTEMS. 
When trying to apply different probe configurations via templates, only some of the systems are getting the templates applied. Guest A and Guest B have different names but after trying regex, even explicitly stating the machine name is failing as well. 
LAST UPDATE: 2017-08-23    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1333117

HUB HOTFIX HUB 7.92HF6 TUNNEL CONNECTIONS FAIL WITH "DH KEY TOO SMALL" 
Error seen in hub logs when tunnel failure occurs: Aug 18 08:48:41:495 [4896] hub: SSL_connect error occured Aug 18 08:48:41:495 [4896] hub: [1] error:0x14082174:SSL routines:ssl3_check_cert_and_algorithm:dh 
LAST UPDATE: 2017-08-22    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1830178

SIMPLIFIED STEPS TO PERFORM A GENERIC 3.00 CABI PROBE INSTALLATION FOR USE WITH UIM ONLY 
Instructions for successfully installing the 3.00 cabi probe on the Wiki pages are difficult to follow. This document provides basic steps to perform a bundled mode cabi install for use with UIM only.
LAST UPDATE: 2017-08-22    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1924208

USING THE SDGTW PROBE, WHEN MULTIPLE ALARMS COME IN QUICKLY, THE TICKETS CREATED IN THE SERVICE DESK APPLICATION WILL GET MERGED. 
Using the sdgtw probe, when multiple alarms come in quickly, the tickets created in the service desk application will get merged. In other words, the alarm will link to 1 ticket but have activity from multiple alarms. 
LAST UPDATE: 2017-08-22    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1929224

VMWARE PROBE DOES NOT DISPLAY VCENTER IN UMP 
Devices discovered by vmware probe attached to secondary hub are not displayed in UMP
LAST UPDATE: 2017-08-22    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1561903

EMAILGTW ERROR AUTHENTICATING TO OFFICE365 SMTP SERVER 
Primary mail server is smtp.office365.com:587 Ignore TLS: Not selected The log indicates the following: emailgtw: EHLO %MachineNamewithEmailgdtwProbe%.domain.com emailgtw: 250-%outlookserver.office365.com% Hello [1.1.1.2] emailgtw: 250-SIZE 157286400 
LAST UPDATE: 2017-08-18    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1741262

THE MESSAGES FOR ALARMS FORWARDED FROM VCENTER DO NOT CONTAIN ENOUGH INFORMATION 
The vmware probe can generate alarms for events and alarms generated in vcenter. The messages for these alarms do not contain enough information to be usefull
LAST UPDATE: 2017-08-18    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1054836

WHAT VARIABLES CAN BE USED IN VMWARE PROBE MESSAGES? 
The vmware probe documentation details the variables but does not provide full description
LAST UPDATE: 2017-08-18    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1052889

CANNOT GET PVS PROBE SETUP TO AUTHENTICATE WITH CITRIX 
Removed special chars from user and password. Confirmed the prerequisites were followed as per the product documentation. Tested different user credential formats, i.e. Domain\Account, Account, etc. Ran through steps but don't see authentication work.
LAST UPDATE: 2017-08-17    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1678649

PROBE CDM WITH FIXED THRESHOLD DON'T TRIGGER THE ALARM. 
CDM don't trigger the alarm for Memory or Disk or CPU
LAST UPDATE: 2017-08-17    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1311951

NIMALARM OPTIONS UPDATED 
Some alarms created with nimalarm 8.4 may not be displayed because a change in the nimalarm options made in 8.4
LAST UPDATE: 2017-08-17    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1994971

HOW TO TROUBLE SHOOT DATA RETENTION AND DATABASE GROWTH 
Below are steps to take to try and resolve or deal with data retention issues and explain how to safely 'prune' data/reduce the amount of data being retained.
LAST UPDATE: 2017-08-16    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC000004903

MULTIPLE UMP SERVERS NOT IN SYNC 
After configuring multiple UMP nodes per https://docops.ca.com/ca-unified-infrastructure-management/8-5-1/en/installing-ca-uim/install-unified-management-portal-ump/configure-multiple-ump-servers - but changes on one node are not synced to the other. 
LAST UPDATE: 2017-08-16    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1409277

QOS_PROCESSOR NOT UPDATING ORIGINS - ERROR - FAILED TO ENQUEUE PENDING QOS OBJECT, QUEUE CAPACITY EXCEEDED. 
Error message seen as follows: [Qos Monitor Enricher #5, qos_processor] Failed to enqueue pending qos object, queue capacity exceeded. The update will be made when memory is released. No data will be lost. 
LAST UPDATE: 2017-08-16    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1207771

FIREWALL CONSIDERATIONS FOR UIM HUB TUNNELS 
This article serves as a repository for knowledge that CA has gained through working with customers in the field regarding the appropriate configurations for firewalls in a UIM Hub tunnel environment.
LAST UPDATE: 2017-08-16    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1033813

PROBEDISCOVERY QUEUE NOT PROCESSING ANY MESSAGES 
The discovery_server probe shows high CPU consumptions but fails to clear messages from the probeDiscovery queue, eventually causing the hub to disconnect the queue.
LAST UPDATE: 2017-08-16    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1649953

HOW TO RE-ENABLE ALARM ENRICHMENT 
alarm_enrichment, enable, nas
LAST UPDATE: 2017-08-16    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1110354

WHAT SECTIONS OF THE VMWARE TEMPLATES REFER TO THE VCENTER AND THE ESXI HOSTS? 
This document shows what the different sections of the VMware templates are used for.
LAST UPDATE: 2017-08-15    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1571117

WHAT IS THE PORT USED FOR TRANSMISSION OF SYSLOG-OUT MESSAGES TO REMOTE SYSLOG DAEMONS BY THE SYSLOGGTW PROBE 
TEC document provides information on the port and configuration used by sysloggtw probe for remote syslog daemons
LAST UPDATE: 2017-08-15    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1595025

I AM GETTING DUPLICATE ALARMS IN USM AND MY ALARM COUNTS BETWEEN USM AND IM ARE MISMATCHED. 
How to remove duplicate alarms from ems and nas.
LAST UPDATE: 2017-08-14    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1981917

CAN DASHBOARDS BE EXPORTED FROM PREVIOUS VERSIONS OF UMP AND IMPORTED INTO NEW VERSIONS OF UMP? 
Exporting and importing dashboards from different versions of UMP
LAST UPDATE: 2017-08-14    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1012664

'INTERNAL USED MEMORY' ALARM FROM JVM_MONITOR PROBE 
jvm_monitor probe is raising the following alarm. The probe internal used memory 501760KB (196%) is = 100.0% of 256000KB
LAST UPDATE: 2017-08-14    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1026687

USM PORTLET POPS UP UNKOWN ERROR AND FAILS TO START 
This TEC document provides information on USM portlet error and steps to resolve this 
LAST UPDATE: 2017-08-11    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1795224

WE HAVE UMP SETUP FOR ACCESS FROM PUBLIC IP ADDRESS. WE GET AN ERROR WHEN TRYING TO ACCESS NEW CABI DASHBOARDS FROM PUBLIC NAME SPACE. 
This article provide details on how to change the CABI setup to be able to access CABI reports in UMP when accessing from Public Name space.
LAST UPDATE: 2017-08-10    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1463001

THE ALARMS ARE NOT SHOWING THE CA SERVICE DESK INCIDENT NUMBER 
After migrating to sdgtw from casdgtw, the CA Service Desk incident number is not displayed on the alarm. Previously, with the casdgtw the incident number would appear in the custom_1 field. 
LAST UPDATE: 2017-08-10    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1844142

CDM PROBE ALARM MESSAGE WITH TOP PROCESSES INFORMATION IS EMPTY 
This TEC document provides information on scenarios where the processes information in the cdm probe alarm message can be missing
LAST UPDATE: 2017-08-10    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1203852

HOW TO DETERMINE CORRECT METRIC TYPE INFORMATION IN THE TOP N REPORT OR GROUP TREND REPORT FOR UMP 
This TEC doc provides information on determining correct metric type for Reports in USM portlet in UMP
LAST UPDATE: 2017-08-10    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1502107

HOW CAN I GET DATA FROM SYSTEM TO SHOW AVAILABILITY BASED ON THE NET_CONNECT PROBE THAT WILL SHOW MY ORIGIN AND HAVE A DATE RANGE? 
This article provide a MS SQL query with parameter to allow you to customize the query for a particular start and end date. 
LAST UPDATE: 2017-08-09    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1061693

PRIOR TO UIM 8.31 WE USED TO BE ABLE TO MAKE A CHANGE TO THE PORTAL-EXT.PROPERTIES FILES AND FORCE END USERS TO LAND ON SITE WEB PAGES. AFTER UPGRADING PAST UIM 8.31 WE CAN NO LONGER DO THIS. HOW TO WE CORRECT THIS? 
This artcile provides details steps on how to force when a user logs into UMP to have them land on Site pages rather than personal private or public pages.
LAST UPDATE: 2017-08-09    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1276814

VMWARE PROBE KEY HOST NOT FOUND 
When configuring a new vmware template it appears to be corrupted as soon as we save the configuration. We have audit enabled
LAST UPDATE: 2017-08-09    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1154516

CDM IS SENDING INTERNAL ALARMS REGARDING CHECKMEMINFO - GETMEMINFO FAILED (TEMPORARILY OUT OF RESOURCES) 
Seeing cdm: CheckMemInfo - GetMemInfo failed (temporarily out of resources) in the logs, Windows and AIX system may be affected. 
LAST UPDATE: 2017-08-09    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1865274

VMWARE PROBE USING A LOT OF HARD DISK SPACE 
More specifically the vmware/discovery folder is backing up 
LAST UPDATE: 2017-08-09    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1282677

EMAILGTW NOT WORKING WITH EXCHANGE SETTINGS 
Emailgtw is not sending emails when we setup Exchange. We see CreateProcessAsUserFailed - error code(1314)
LAST UPDATE: 2017-08-09    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1643158

THE CHANGE ON ACTIVE MONITORS IN VMWARE PROBE DOES NOT GET REFLECTED. 
When making change on active monitors through Admin Console, it does not get reflected after the probe is restarted. 
LAST UPDATE: 2017-08-09    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1439382

AUTOMATED DEPLOYMENT OF ROBOT FROM USM GETS STUCK AT 50% 
When attempting to deploy a robot to a discovered system in USM, the deployment may appear to halt at 50% and never recover.
LAST UPDATE: 2017-08-08    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1737442

WHAT IS THE UIM DATABASE REPRESENTATION OF A DB2'S DATABASE STATUS? 
representation of a db2 databases status in the uim database
LAST UPDATE: 2017-08-08    SIZE: 82 kb     TYPE: Knowledge Base Articles    ID: TEC1563971

NETAPP PROBE REPORTS INCORRECT AMOUNT OF "UNCONFIGURED DISKS" 
The netapp probe keeps raising alarms as the Number of Unconfigured Disks is greater than the threshold. However, there are no unconfigured Disks on the filer. 
LAST UPDATE: 2017-08-08    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1306028

"REQUEST ERROR - COMMUNICATION ERROR" WHEN ADDING DISK RESOURCES FOR CDM IN CLUSTER PROBE 
When trying to add a new Disk to the Cluster probe configuration for CDM probe the following error message pops up: "Request Error - communication error"
LAST UPDATE: 2017-08-08    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1911156

INSTALL SECONDARY HUB IN CLUSTER 
Primary hub can be installed in cluster, the same way the secondary hub can be installed in cluster?
LAST UPDATE: 2017-08-08    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1856627

HOW TO CHECK IF PROCESSES PROBE GETS CORRECT MEMORY VALUE(QOS_PROCESS_MEMORY) IN WINDOWS 
This document is about how to compare memory value in process probe and Windows Resource Monitor tool.
LAST UPDATE: 2017-08-08    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1612892

ADD ADMIN CONSOLE AS A PORTLET IN UMP 
It can be very convenient to add Admin Console as a portlet in UMP.
LAST UPDATE: 2017-08-04    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1180604

NET CONNECT PROBE IS SENDING FALSE CLEAR ALARMS 
On net_connect 3.31 we are monitoring a device that is always down. The alarms occasionally clear which is not possible.
LAST UPDATE: 2017-08-04    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1310558

TEMPLATES ARE NOT BEING APPLIED WHEN WE CONFIGURE ITEMS VIA ADMIN CONSOLE 
This is only applicable if you use template Filters.
LAST UPDATE: 2017-08-04    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1703543

AFTER DOING ROBOT UPDATE 7.91 ON AIX SYSTEM SOME PROBES STOP WORKING SUCH AS DB2 PROBE. WHY? 
This article explains why some probes stop working after robot update 7.91 on AIX and how this can be fixed.
LAST UPDATE: 2017-08-04    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1245354

NOT ABLE TO RUN "RM" TO DELETE FILES WITH "DIRSCAN" PROBE 
Using dirscan on a Linux system. When it detects a file over a certain size and by extension, when found it deletes the file. The first part is working fine, it is detecting the file of a certain size and generating an alarm yet does not delete the file.
LAST UPDATE: 2017-08-04    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1771995

NAS: ALARM_ENRICHMENT RULE 
We want an alarm_enrichment rule to lookup the device details in our CMDB based on the short name / hostname and not the FQDN. The trouble is the source alarm contains the FQDN and the CMDB contains the short name / hostname. 
LAST UPDATE: 2017-08-04    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1206036

IS SERVER MESSAGE BLOCK (SMB) PROTOCOL USED BY UIM 
This TEC doc provides information of which UIM component uses Server Message Block (SMB) protocol
LAST UPDATE: 2017-08-04    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1359091

ENRICHED ORIGINS ARE NO LONGER CORRECT IN USM AFTER THE UPGRADE TO 8.51 
After upgrading to UIM 8.51 we see metrics disappearing and we use qos processor to enrich origins
LAST UPDATE: 2017-08-03    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1979365

REINSTALL UMP/WASP 
Wasp is failing with a max restarts error, all other methods of remediation have failed. This is a LAST step approach. 
LAST UPDATE: 2017-08-03    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1588674

HOW TO MANUALLY ADD PROBE LICENSES VIA THE PROBE UTILITY 
If necessary, you can add probe licenses to the individual distsrvs via the probe utility. This is handy if the licenses have expired and the probes are down.
LAST UPDATE: 2017-08-03    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1508084

SDGTW PROBE IS CREATING DUPLICATE INCIDENTS IN SERVICENOW FOR ONE ALARM 
This was due to the customer's field mappings being incorrect
LAST UPDATE: 2017-08-03    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1345118

HOW TIME OVER THRESHOLD WORKS 
A brief summary of how the time over threshold works.
LAST UPDATE: 2017-08-03    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1257531

UPDATE OF THE MCS TEMPLATES FAILED AFTER UPGRADE TO UIM 8.51 SP1 
activate_template callback in mon_config_service probe fails after upgrade to 8.51 SP1
LAST UPDATE: 2017-08-02    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1140086

PARTIAL GRAPH PUBLISHING FOR VMWARE PROBE 
This TEC provides information on the partial graph publishing feature for vmware probe 
LAST UPDATE: 2017-08-01    SIZE: 83 kb     TYPE: Knowledge Base Articles    ID: TEC1967959

2 people found this helpful

Attachments

    Outcomes