If someone can show me what parameter should be changed, then it will be great
########################################################################
#
# Introscope Enterprise Manager Preferences
#
# CA Wily Introscope(R) Version 9.1 Release 9.1.5.0
# Copyright (c) 2013 CA. All Rights Reserved.
# Introscope(R) is a registered trademark of CA.
#######################################################################
#######################
# Enterprise Manager Name
#
# ================
# Set the name of this EM.
# Default is: Introscope Enterprise Manager
#introscope.enterprisemanager.name=
#######################
# Available Processors
#
# ================
# Set the number of processors available to this EM.
# Use this property if there is more than one EM running on the host.
# Default is to use all available processors.
#introscope.enterprisemanager.availableprocessors=
#######################
# IP Address Binding
#
# ================
# The property for binding all EM communication channels (including the embedded
# web server) to a specific local IP address. When not configured, the EM will
# accept incoming connections on all local addresses (the wildcard address).
#
# For IPV6 environments this must be an IPV6 formatted address.
# introscope.enterprisemanager.ipaddress=(set to a valid IP address on EM machine)
#######################
# Port Settings
#
# ================
# The EM is configured with several communication channels.
# To enable a communication channel, add the channel id to the
# comma separated list of enabled channels. Likewise, a communication
# channel may be disabled by removing it from that same list.
#
# All communication to the EM is obfuscated, and passwords are always encrypted.
# The enabled communication channels.
introscope.enterprisemanager.enabled.channels=channel1
# Use this to enable both the default channel and secure channel.
#introscope.enterprisemanager.enabled.channels=channel1,channel2
# The default communication channel.
introscope.enterprisemanager.serversocketfactory.channel1=com.wily.isengard.postofficehub.link.net.server.DefaultServerSocketFactory
introscope.enterprisemanager.port.channel1=5001
# The secure (SSL) communication channel.
introscope.enterprisemanager.serversocketfactory.channel2=com.wily.isengard.postofficehub.link.net.server.SSLServerSocketFactory
introscope.enterprisemanager.port.channel2=5443
# Location of a keystore containing certificates for authenticating the EM to clients.
# Either an absolute path or a path relative to the config directory.
# On Windows, backslashes must be escaped. For example:
# introscope.enterprisemanager.keystore.channel2=C:\\Introscope\\config\\internal\\server\\keystore
introscope.enterprisemanager.keystore.channel2=internal/server/keystore
# Set this property to true to enable encryption of introscope.enterprisemanager.keypassword.channel2
# Once introscope.enterprisemanager.keypassword.channel2 is encrypted,
# this property is automatically set to false.
#
# To change the existing password, enter the new password and set this property to true.
# Note: If this property is set to true and the password is not changed, the existing encrypted password will be encrypted again.
# If password field for a new channel is configured, add the corresponding
# plaintextpassword field and set it to true to enable encryption.
introscope.enterprisemanager.keypassword.channel2.plaintextpassword=true
# The password for the keystore.
introscope.enterprisemanager.keypassword.channel2=password
# Location of a truststore containing trusted client certificates.
# Either an absolute path or a path relative to the config directory.
# On Windows, backslashes must be escaped. For example:
# introscope.enterprisemanager.truststore.channel2=C:\\Introscope\\config\\internal\\server\\keystore
# The truststore is optional. It is needed only if client authentication is required.
# If no truststore is specified, the EM trusts all client certificates.
#introscope.enterprisemanager.truststore.channel2=internal/server/keystore
# Set this property to true to enable encryption of introscope.enterprisemanager.trustpassword.channel2
# Once introscope.enterprisemanager.trustpassword.channel2 is encrypted,
# this property is automatically set to false.
#
# To change the existing password, enter the new password and set this property to true.
# Note: If this property is set to true and the password is not changed, the existing encrypted password will be encrypted again.
# If password field for a new channel is configured, add the corresponding
# plaintextpassword field and set it to true to enable encryption.
# introscope.enterprisemanager.trustpassword.channel2.plaintextpassword=false
# The password for the truststore
#introscope.enterprisemanager.trustpassword.channel2=password
# Set to true to require clients to authenticate.
# If true, clients must be configured with a keystore containing a certificate trusted by the EM.
# Default is false
introscope.enterprisemanager.needclientauth.channel2=false
# Set the enabled cipher suites.
# A comma-separated list of cipher suites.
# If not specified, use the default enabled cipher suites.
#introscope.enterprisemanager.ciphersuites.channel2=
# This property is used for Workstations launched via Java Web Start, to set
# the communication port used for communicating with the Enterprise Manager.
introscope.enterprisemanager.workstation.connection.channel=channel1
# When this property is set to true, the Time Range and Resolution widgets are
# enabled in the workstation dashboard in the "live" mode.
# This allows the user to enter custom time range and resolution for the live mode
# instead of the default time range of 8 minutes and resolution of 15 seconds.
# Please note that a time range greater than 8 minutes could potentially impact
# performance in the EM (due to I/O operations to fetch data from smartstor)
introscope.enterprisemanager.workstation.extendedLiveQuery=true
#################################
# Workstation Login Parameters Auto Fill
#
# ================
# Workstation remembers login parameters (Enterprise Manager host, port, and UserId) for webstart.
# Default is TRUE. If set to FALSE, Workstation will not remember login parameters.
introscope.enterprisemanager.workstation.rememberLogin=true
# Set the following property to true to allow a communication channel
# server socket to rebind to a local port that is stuck in a FIN_WAIT or
# TIME_WAIT state (SO_REUSEADRR). Once the EM starts up again, this property
# should be disabled. In general it is not a good idea to enable this property
# by default since there may be a valid reason that the port is already in use.
#introscope.enterprisemanager.serversockets.reuseaddr=
#######################
# EM Web Server Settings
#
# ================
# Controls configuration of the embedded web server;
# The port that the web server listens on
introscope.enterprisemanager.webserver.port=8081
# The directory for deployment of web application files
introscope.enterprisemanager.webserver.dir=webapps
# How often to hot-deploy web applications (in seconds)
introscope.enterprisemanager.webserver.refresh=60
# The property to keep the EM from starting if the web server port is already in use
introscope.enterprisemanager.webserver.portinuse.fail=true
# The maximum number of listener threads in the web server. Defaults to 100.
#
# DO NOT CONFIGURE THIS PROPERTY unless more than 80 HTTP tunneling agents
# are connecting to this EM. In this case we recommend setting the property
# value to 20 more than the maximum number of connecting HTTP tunneling agents.
#
#introscope.enterprisemanager.webserver.max.threads=100
# Path to a Jetty 6.1.26 XML configuration file. Either an absolute path, or a path relative to the config directory.
# For advanced Jetty configuration, uncomment this property and modify the settings in the Jetty configuration file.
# Default is em-jetty-config.xml. This file creates an SSL listener on port 8444 for https traffic.
# If uncommented, the http listener specified by the introscope.enterprisemanager.webserver.port property is not created,
# but if desired it can be configured in the Jetty XML file.
#introscope.enterprisemanager.webserver.jetty.configurationFile=em-jetty-config.xml
#################################
# Logging Configuration
# ================
#
# Logging properties support hot config.
#
# The following property, log4j.logger.Manager,
# controls both the amount of detail
# that is logged and the output location.
# Replace the text 'INFO' with the much longer text shown below -
# 'VERBOSE#com.wily.util.feedback.Log4JSeverityLevel'
# to increase the level of detail.
# Replace 'console' with 'logfile' (without the quotes)
# to send the output to a log file instead of the console.
log4j.logger.Manager=INFO, console, logfile
log4j.logger.Manager.Support=INFO, supportlogfile
log4j.logger.com.wily=INFO, console, logfile
log4j.logger.com.timestock=INFO,console,logfile
log4j.logger.com.ca.wily=INFO,console,logfile
log4j.logger.Apm.Data.Model=INFO,console,logfile
log4j.logger.apm.events=INFO,console,logfile
log4j.additivity.Manager.Support=false
log4j.additivity.com.wily=false
log4j.additivity.com.timestock=false
log4j.additivity.com.ca.wily=false
log4j.additivity.Apm.Data.Model=false
log4j.additivity.apm.events=false
log4j.logger.org.mortbay=ERROR
log4j.logger.org.quartz=ERROR, console, logfile
log4j.logger.org.apache.myfaces=ERROR,console
log4j.logger.org.apache.jasper.compiler.TagLibraryInfoImpl=ERROR
#log4j.logger.org.springframework.transaction=DEBUG,console
#Turn off the info logging for hibernate and spring
log4j.logger.org.hibernate=ERROR,console,logfile
#This is to avoid logging c3p0 data source closing as errors during EM shutdown.
log4j.logger.org.hibernate.util.JDBCExceptionReporter=FATAL
log4j.logger.org.hibernate.event.def.AbstractFlushingEventListener=FATAL
# suppress hibernate logging of LIEs (let CEM log these)
log4j.logger.org.hibernate.LazyInitializationException=FATAL
# sql logging
log4j.logger.org.hibernate.SQL=ERROR,console,logfile
# c3p0 logging
log4j.logger.com.mchange.v2.c3p0=ERROR,console,logfile
log4j.logger.com.mchange.v2.resourcepool=ERROR,console,logfile
# Other third party libraries Logging
log4j.logger.net.sf.navigator.taglib.DisplayMenuTag=ERROR,console,logfile
log4j.logger.net.sf.ehcache=ERROR,console,logfile
log4j.logger.org.springframework=ERROR,console,logfile
log4j.logger.org.acegisecurity=ERROR,console,logfile
log4j.logger.org.displaytag=ERROR,console,logfile
log4j.logger.org.jasypt=ERROR,console,logfile
# If logfile is specified above, the location of the log file
# is configured with the following property,
# log4j.appender.logfile.File. Full paths can
# be used if desired.
log4j.appender.logfile.File=logs/IntroscopeEnterpriseManager.log
log4j.appender.supportlogfile.File=logs/IntroscopeEnterpriseManagerSupport.log
########## See Warning below ##########
# Warning: The following properties should not be modified for normal use.
log4j.additivity.Manager=false
log4j.appender.console=com.wily.org.apache.log4j.ConsoleAppender
log4j.appender.console.layout=com.wily.org.apache.log4j.PatternLayout
log4j.appender.console.layout.ConversionPattern=%d{M/dd/yy hh:mm:ss.SSS a z} [%-3p] [%t] [%c] %m%n
log4j.appender.logfile=com.wily.org.apache.log4j.RollingFileAppender
log4j.appender.logfile.layout=com.wily.org.apache.log4j.PatternLayout
log4j.appender.logfile.layout.ConversionPattern=%d{M/dd/yy hh:mm:ss.SSS a z} [%-3p] [%t] [%c] %m%n
log4j.appender.logfile.MaxBackupIndex=4
log4j.appender.logfile.MaxFileSize=200MB
log4j.appender.supportlogfile=com.wily.org.apache.log4j.RollingFileAppender
log4j.appender.supportlogfile.layout=com.wily.org.apache.log4j.PatternLayout
log4j.appender.supportlogfile.layout.ConversionPattern=%d{M/dd/yy hh:mm:ss a z} [%-3p] [%c] %m%n
log4j.appender.supportlogfile.MaxBackupIndex=4
log4j.appender.supportlogfile.MaxFileSize=20MB
introscope.enterprisemanager.performance.compressed=true
log4j.additivity.Manager.Performance=false
log4j.logger.Manager.Performance=DEBUG, performance
log4j.appender.performance=com.wily.introscope.server.enterprise.monitor.PerformanceLogFileAppender
log4j.appender.performance.layout=com.wily.org.apache.log4j.PatternLayout
log4j.appender.performance.layout.ConversionPattern=%d{M/dd/yy hh:mm:ss a z},%m%n
log4j.appender.performance.File=logs/perflog.txt
log4j.appender.performance.MaxSize=4000000
### Logging for Tess performance log ###
log4j.additivity.com.wily.apm.tess.supportability.TessPerformanceCollector=false
log4j.logger.com.wily.apm.tess.supportability.TessPerformanceCollector=DEBUG, tessperformance
log4j.appender.tessperformance=com.wily.apm.tess.supportability.TessPerformanceLogFileAppender
log4j.appender.tessperformance.layout=com.wily.org.apache.log4j.PatternLayout
log4j.appender.tessperformance.layout.ConversionPattern=%d{M/dd/yy hh:mm:ss a z},%m%n
log4j.appender.tessperformance.File=logs/tessperflog.txt
log4j.appender.tessperformance.MaxSize=4000000
# Configure HTTP Tunneling Transport logging
log4j.logger.org.apache.axis=OFF
log4j.additivity.Manager.QueryLog=false
log4j.logger.Manager.QueryLog=INFO, querylog
log4j.appender.querylog=com.wily.org.apache.log4j.RollingFileAppender
log4j.appender.querylog.layout=com.wily.org.apache.log4j.PatternLayout
log4j.appender.querylog.layout.ConversionPattern=%m%n
log4j.appender.querylog.File=logs/querylog.txt
log4j.appender.querylog.MaxBackupIndex=1
log4j.appender.querylog.MaxFileSize=4MB
# Configuring CLWCommandLog
# =========================
# The property log4j.logger.Manager.CLW is set to DEBUG and the property log4j.additivity.Manager.CLW
# is set to true to log the CLW commands in the log file and on the EM Console
log4j.additivity.Manager.CLW=false
log4j.logger.Manager.CLW=INFO
#####################################################################
# EM Metric Clamps are moved to new XML configuration file apm-events-thresholds-config.xml file
# under the same directory as this file.
#
# Important Note: Please note that the clamps' threshold configured in this file will not be affective.
# Modify apm-events-thresholds-config.xml configuration file for configuring the new thresholds.
############################################################################################
#######################
# SmartStor Settings
# ================
# The directory that the EM will use for data storage
introscope.enterprisemanager.smartstor.directory=E:/data
introscope.enterprisemanager.smartstor.directory.archive=E:/data/archive
introscope.enterprisemanager.smartstor.dedicatedcontroller=true
# For the next three sets of properties, the storage
# frequency must be a multiple of 15 seconds and the
# data age is specified in days. The age must not be
# zero. The frequency must not be greater than
# 1800 seconds (=30 minutes). Each tier's frequency must
# be an even multiple of the previous tier's frequency (this
# multiple can be one; each tier can have the same
# frequency). All three tiers must be defined, and you
# cannot define more than three tiers.
introscope.enterprisemanager.smartstor.tier1.frequency=15
introscope.enterprisemanager.smartstor.tier1.age=7
introscope.enterprisemanager.smartstor.tier2.frequency=60
introscope.enterprisemanager.smartstor.tier2.age=23
introscope.enterprisemanager.smartstor.tier3.frequency=900
introscope.enterprisemanager.smartstor.tier3.age=335
# Time offset for data tiering (hour of day between 0-23)
# For example, if this offset is set to 2, the data tiering will start at 2am
# The default value is 0 (12am or midnight).
#introscope.enterprisemanager.smartstor.reperiodizationOffsetHour=0
# Time offset for spool converting to data (minute of hour between 0-59)
# For example, if this offset is set to 10, the conversion will start at xx:10
# The default value is 0 (xx:00).
#introscope.enterprisemanager.smartstor.conversionOffsetMinute=0
#######################
# Transaction Event Database Settings
# ================
# The Enterprise Manager stores captured Transaction Events
# locally on its file system for a fixed length of time or
# until a maximum disk usage is exceeded.
# The following three properties allow you to control where
# to store these events and when they should be deleted.
# The directory that the EM will use for trace storage
introscope.enterprisemanager.transactionevents.storage.dir=traces
# How many days to store traces
introscope.enterprisemanager.transactionevents.storage.max.data.age=14
# Specifies how often (frequency in hours) trace storage should be optimized by cleaning
# up aged data.
# The default value is 24 hours.
introscope.enterprisemanager.transactionevents.storage.optimize.frequency=24
# Time offset for storage optimization (hour of day between 00-23)
# For example, if time offset is set to 02 and optimize frequency is set to 24 hours,
# optimization will be run every 24 hours offset from time 02:00.
# Or for example, if time offset is set to 03 and optimize frequency is set to 6 hours,
# optimization will be run every 6 hours offset from time 03:00.
# The default value is 02 (2 am).
introscope.enterprisemanager.transactionevents.storage.optimize.timeoffsethour=02
#######################
# EM Object Database Settings
# ================
# The Enterprise Manager stores baselines and other system data in an
# embedded Object Database.
# The following property allows you to control its location.
introscope.enterprisemanager.dbfile=data/baselines.db
#######################
# EM Config Directory
# ================
# The directory the EM will use for configuration
# Either an absolute path or a path relative to the Introscope installation directory
# On Windows, backslashes must be escaped. For example:
# introscope.enterprisemanager.directory.config=C:\\Introscope\\em1\\config
# Default is config directory in Introscope installation
#introscope.enterprisemanager.directory.config=config
#######################
# Auto-Unmount of Disconnected Agents
# (Known as "Auto-purging" in previous Introscope releases)
# ================
# Once an agent has disappeared, the Enterprise Manager continues to track it
# (in case the interruption is temporary). This delay allows you to control the
# amount of time that will pass after the disconnect before the Enterprise Manager
# releases the resources associated with tracking the agent. Units are minutes.
introscope.enterprisemanager.autoUnmountDelayInMinutes=60
#######################
# SQL Database Settings
#
# ================
# Introscope records traced data to a relational database as
# specified here. Comment out these properties
# if you want to turn off database recording
#
# To change introscope.enterprisemanager.db.password,
# specify the new password and set introscope.enterprisemanager.db.password.plaintextpassword to true.
# Note: If introscope.enterprisemanager.db.password.plaintextpassword property is set to true
# and the password is not changed, the existing encrypted password will be encrypted again.
# Once introscope.enterprisemanager.db.password is encrypted,
# introscope.enterprisemanager.db.password.plaintextpassword is automatically set to false.
#introscope.enterprisemanager.db.driver=oracle.jdbc.driver.OracleDriver
#introscope.enterprisemanager.db.url=jdbc:oracle:thin:@myDatabase:myPortID:SID
#introscope.enterprisemanager.db.username=myUser
#introscope.enterprisemanager.db.password.plaintextpassword=false
#introscope.enterprisemanager.db.password=myPassword
# Sets the interval in seconds between automatic attempts to reconnect to the
# database. Comment out this property to disable database reconnection.
introscope.enterprisemanager.db.reconnect.intervalInSeconds=30
# Sets the maximum number of metric data points in the database queue.
# Default is 150K.
# This property supports hot config.
introscope.enterprisemanager.database.recordingQueue.upperLimit.value=153600
# This enables batch insertion of metric values into the database.
# Batch inserts are a JDBC 2.0 feature; if your JDBC driver supports
# them, enabling this switch will increase the performance of value
# inserts significantly.
#introscope.enterprisemanager.db.useBatchInserts=true
# This controls the size (in row insertion count) of batch inserts, if they are enabled.
#introscope.enterprisemanager.db.batchInsertSize=100
# Sets the amount of time to wait for a query to complete before
# giving up. The value is the number of seconds to wait. A value
# of zero (the default value) means no timeout for queries.
# Not all databases and JDBC drivers support query timeouts.
# This property will only be used when both the JDBC driver
# and the database support query timeouts.
#introscope.enterprisemanager.db.queryTimeoutInSeconds=0
# This specifies the table qualifier to explicitly fully qualify table names.
# This qualifier will be prepended (or appended as appropriate) directly to
# the table name so be sure to include any separator required by the database.
#introscope.enterprisemanager.db.tablequalifier=myExplicitTableQualifier
# Sets the size of the internal caches which are used to improve performance.
# A value of -1 will allow the caches to grow as much as necessary and is
# recommended unless the limits of system memory are being reached. The
# value is the number of cache entries per database table so it will scale
# linearly with memory usage.
#introscope.enterprisemanager.db.maximumTableCacheSize=-1
# Sets the number of database connections to use for running database queries.
# A larger number of connections will consume more system resources but allow
# more simultaneous database queries to be processed. Each simultaneous
# connection needs the use of a temporary table in the database. The provided
# database schema only contains five temporary tables and therefore only
# supports five simultaneous query connections. If additional connections
# are desired, additional temporary database tables must be added.
#introscope.enterprisemanager.db.queryConnections=1
#######################
# Database Persistent Collection Settings
#
# ================
# Persistent collections define metric data written to
# an external relational database.
#
# Persistent collections require three properties:
# agentExpression: a Perl5 regular expression to match agents
# metricExpression: a Perl5 regular expression to match metrics
# frequencyinseconds: how often metric data is aggregated and written to the database
#
# Backslashes must be escaped.
#
# Persistent collections are identified by a unique id appended to each of the
# introscope.enterprisemanager.database.collection properties
#
# Persistent collection properties support hot config.
#
# Examples:
#introscope.enterprisemanager.database.collection1.agentExpression=rhart-dt1\\|EPAgentProcess1\\|EPAgent5
#introscope.enterprisemanager.database.collection1.metricExpression=Servlets\\|MyServlet:Average Response Time \\(ms\\)
#introscope.enterprisemanager.database.collection1.frequencyinseconds=3600
#introscope.enterprisemanager.database.collection2.agentExpression=(.*)
#introscope.enterprisemanager.database.collection2.metricExpression=EJB\\|Session\\|MyBean\\|service:Stalled Method Count
#introscope.enterprisemanager.database.collection2.frequencyinseconds=60
#######################
# Flat File Recording
#
# ================
# Introscope can record traced data to comma separated value (.csv)
# flat files in a specified directory. Uncomment this line
# to turn on flat file recording, and change the value to specify
# the directory that hosts the flat files
introscope.enterprisemanager.flatfile.homedir=flatfiles
# Sets the maximum size of a flat file in megabytes. When exceeded,
# Introscope will archive the file to a zip file, compressing
# by approximately 95%. The default maximum size is 100 megabytes.
introscope.enterprisemanager.flatfile.maxFileLength=100
# Sets the amount of time that will be stored in a single flat file
# before archiving. Can be used along with a maximum size. Archiving
# based on time is disabled if the property is commented out.
#introscope.enterprisemanager.flatfile.maxTimeInHours=24
# Can be set to true to disable compression when archiving flat files.
# If disabled, flat files will simply be moved into the archive directory
# with the extension .full.csv.
introscope.enterprisemanager.flatfile.disableCompression=false
#######################
# Flat File Persistent Collection Settings
#
# ================
# Introscope records metric data to flat files as specified here.
# Each persistent collection entry consists of an
# agent expression, a metric expression and a frequency in seconds. The
# metric data for the matching metrics will be written to a flat file
# at the specified frequency. Each entry starts with the key prefix
# introscope.enterprisemanager.flatfile.collection and should be numbered
# sequentially starting with 1.
#introscope.enterprisemanager.flatfile.collection1.agentExpression=.*
#introscope.enterprisemanager.flatfile.collection1.metricExpression=.*
#introscope.enterprisemanager.flatfile.collection1.frequencyinseconds=60
#introscope.enterprisemanager.flatfile.collection2.agentExpression=.*
#introscope.enterprisemanager.flatfile.collection2.metricExpression=.*
#introscope.enterprisemanager.flatfile.collection2.frequencyinseconds=3600
#######################
# Interactive Mode
#
# ================
# Set to false to turn on interactive mode
introscope.enterprisemanager.disableInteractiveMode=true
#######################
# SNMP Adapter
#
# ================
# Set to true to enable the SNMP Adapter
# Default is false
introscope.enterprisemanager.snmp.enable=false
# The port used by the SNMP Agent. Defaults to 161.
introscope.enterprisemanager.snmp.agent.port=161
# This property supports hot config
# Set to true to enable Notifications (Traps).
# Default is true.
introscope.enterprisemanager.snmp.notification.enable=true
# The target port for Notifications.
# Default is 162.
introscope.agent.enterprisemanager.snmp.target.port=162
# The target host (hostname or IP address) for Notifications.
# Default is localhost.
introscope.agent.enterprisemanager.snmp.target.host=localhost
# The target SNMPv2 community for Notifications.
# Default is public.
introscope.agent.enterprisemanager.snmp.target.community=public
#######################
# WebView Configuration
#
# ================
# Set to true to prevent WebView from connecting to the
# Enterprise Manager. Defaults to false.
introscope.enterprisemanager.webview.disableLogin=false
#######################
# Management Module Bootstrapping
#
# ================
# Set to true to stop the Enterprise Manager from starting
# with management modules containing invalid references.
# If false, invalid references are logged as warnings. Defaults to false.
introscope.enterprisemanager.managementModules.invalid.references.as.errors=false
#######################
# Management Module Deployment
#
# ================
# Magic directory to watch
introscope.enterprisemanager.hotdeploy.directory=deploy
# How often to check for new MM files to deploy
introscope.enterprisemanager.hotdeploy.checkFrequencyInSeconds=60
#######################
# Alert State Metrics
#
# ================
# Metric name prefix of the alert-states metrics
introscope.enterprisemanager.alertstatemetric.prefix=Alerts
#######################
# Hot Config
#
# ================
# The hot config properties support hot config
#
# Set to false to disable hot config.
# Default is true.
introscope.enterprisemanager.hotconfig.enable=true
# How often to check this file for changes (in seconds).
# Default is 60 seconds.
introscope.enterprisemanager.hotconfig.pollingInterval=60
#######################
# Application Heuristics
#
# Setting this to false improves the performance of the EM but disables the EM's assessment of JVM, application, and backend health
#
# ================
introscope.enterprisemanager.application.overview.baselines=true
######################
# Agent Config
# (pushed to Agents)
#
# Sampling Rate
# NOTE: The agent defaults to these values. Extreme care should be taken
# when overriding these defaults because of the potential for higher
# load in the EM when a high sampling rate is used
#
#introscope.agent.transactiontracer.sampling.perinterval.count=1
#introscope.agent.transactiontracer.sampling.interval.seconds=120
#######################
# Hot Failover
#
# ================
#Settings for Hot Failover.
#
# EMs sharing the same installation directory can be configured for Hot Failover.
# Set to true to enable hot failover.
# Default is false.
introscope.enterprisemanager.failover.enable=false
# Set to hostname or IP address of the primary EM.
# To configure multiple EMs as primary,
# set to a comma-separated list of hostnames or IP addresses.
# To configure for failover to work in a single host set this property as localhost(refer documentation for more information)
introscope.enterprisemanager.failover.primary=
# Set to hostname or IP address of the secondary EM.
# To configure for failover to work in a single host leave this property blank (refer documentation for more information)
introscope.enterprisemanager.failover.secondary=
# How often a running Secondary EM checks to see if a Primary EM is waiting to start (seconds).
# This property supports hot config.
# Default is 120 seconds (2 minutes).
introscope.enterprisemanager.failover.interval=120
###################################
# Enterprise Manager Clustering Mode
#
# ================
# Clustering mode in which the Enterprise Manager would run
#
# Valid values (case insensitive) are:
#
# StandAlone - Enterprise Manager runs in the stand alone mode
# CDV - Enterprise Manager runs as a Cross-cluster Data Viewer
# Collector - Enterprise Manager runs as a Collector
# MOM - Enterprise Manager runs as a Manager
#
####################################
introscope.enterprisemanager.clustering.mode=MOM
#######################
# Clustering Settings
#
# ================
# Controls clustering of Enterprise Managers.
#
# Settings for Cluster Collector role.
#
# An arbitrary identifier appended to the name of Custom Metric Agents.
# For example, if the identifier is em1, then the agent name is:
# Custom Metric Agent (Virtual) (em1).
# The purpose of the identifier is to uniquely name Custom Metric Agents across the cluster.
# Use a different identifier for each Collector.
# If no identifier is specified, the default identifier of host@port is used,
# where host is the EM's host name, and port is the EM's connection port.
#introscope.enterprisemanager.clustering.collector.identifier=
#
# Settings for Cluster Manager (MOM) role.
#
# Threshold for when a collector is considered slow (in milliseconds)
introscope.enterprisemanager.clustering.manager.slowcollectorthreshold=10000
# Seconds a MOM waits for a Collector to respond before it disconnects it as hung.
# Default is 60 seconds. Setting to zero (or negative) disables the check (not recommended).
# The MOM checks collectors every 7.5 seconds, so small changes don't affect behavior.
introscope.enterprisemanager.clustering.manager.slowcollectordisconnectthresholdseconds=60
# Maximum simultaneous output connections. A higher number does not directly increase
# response time, but will keep isolated slow connections from crippling the whole manager.
# The default, 5, is suitable for most standalone EMs and Collectors. MOMs should have
# one thread per Collector, plus about 1 for every 10 workstations. Do not oversize, as
# additional thread overhead may cause OutOfMemory exceptions - especially on 32 bit JVMs.
# transport.override.isengard.high.concurrency.pool.max.size=10 ## Uncomment for MOMs
# This is the private key used to authenticate a MOM to a collector.
# Either an absolute path or a path relative to the config directory.
introscope.enterprisemanager.collector.privatekey=internal/server/EM.private
# Define MOM Load Balancing properties.
#
# Load Balancing properties support hot config.
#
# The tolerance of the Load Balancer for imbalance.
# The number of metrics in a Collector must differ from the weight-adjusted
# cluster average (i.e. the average for all Collectors) by at least the
# threshold before the Load Balancer rebalances the Cluster.
#
# Rebalancing means redistributing Agents among Collectors
# to equalize the weight-adjusted metric load.
# See the connection properties about setting weights.
#
# Only version 8.0 or later agents that connected to the MOM
# are eligible for rebalancing.
#
# Default is 20000 metrics.
introscope.enterprisemanager.loadbalancing.threshold=20000
# How often the Load Balancer rebalances (seconds).
# Minimum is 120 seconds (2 minutes).
# Default is 600 seconds (10 minutes).
introscope.enterprisemanager.loadbalancing.interval=600
# Define Agent Connection Control properties
#
# Agent Connection Control properties hot config
# All agent control properties values of MOM overrides the respective agent control properties values at Collector.
# At Collector these property values are not considered, if any MOM has connected to the Collector ever.
# For agent(s) that are not specifically matching any regular expression in loadbalancing.xml,
# this decides whether to allow or disallow those agent(s).
introscope.apm.agentcontrol.agent.allowed=true
# Agent utilizes the list if both the MOM and the initial Collector appear to be non-responsive
# Agent utilizes the EM list given by cluster for self lookup in case the Collector the agent connected to goes down
# and the MOM is also not available.
# Agent is also provided with the EM list by StandAlone.
introscope.apm.agentcontrol.agent.emlistlookup.enable=true
# Maximum number of disallowed agents.
# This property value is not overriden by MOM.
# default is 0 (unlimited)
introscope.enterprisemanager.agent.disallowed.connection.limit=0
# This property is to instruct agent interval duration to wait before reattempting the connection to EM.
# EM will randomly add one of these values [-30, -15, 0, +15, +30] to wait. This is done to distribute the simultaneous
# multiple agents connection across time. Agent will wait for this time before reattempting the connection to EM.
# Default is 45 seconds. If the calculated wait value is less than 15 then default value 45 is used
introscope.apm.agentcontrol.agent.reconnect.wait=45
# Define connection properties for clustered EMs.
# Connection properties support hot config.
# Each clustered EM requires three properties:
# host: hostname or ip address of the collector
# port: connecting port of the collector
# publickey: the public key to authenticate the MOM to the collector -
# either an absolute path or a path relative to the config directory
#
# There is an optional weight property to control the relative load of the collector:
# weight: the load balancing weight for this collector EM
#
# All other things being equal, the percentage of metric load assigned to the collector
# is the weight divided by the total weight for the cluster.
# For example, if the weight of a collector is 50 and the sum of the weights of all collectors is
# 250, the collector should get 20% of the cluster's metric load.
#
# The weight should be a positive integer.
# Default is the average weight for the cluster.
#
# Sample properties for a clustered EM.
# Note: em1 is an arbitrary identifier. Use a different identifier for each set of connection properties.
# Avoid use of the value "localhost" as the host.
#
#introscope.enterprisemanager.clustering.login.em1.host=hostname
#introscope.enterprisemanager.clustering.login.em1.port=5001
#introscope.enterprisemanager.clustering.login.em1.publickey=internal/server/EM.public
introscope.enterprisemanager.clustering.login.em1.host=10.0.6.122
introscope.enterprisemanager.clustering.login.em1.port=5001
introscope.enterprisemanager.clustering.login.em1.publickey=config/internal/server/EM.public
introscope.enterprisemanager.clustering.login.em2.host=10.0.6.123
introscope.enterprisemanager.clustering.login.em2.port=5001
introscope.enterprisemanager.clustering.login.em2.publickey=config/internal/server/EM.public
#introscope.enterprisemanager.clustering.login.em1.weight=
######################
# Map Agent Config
#
# ================
# In Introscope 9.x, agents can detect when monitored applications communicate
# with external components, and report this activity to the EM. The activity data
# is then used to draw application maps in the Workstation.
#
# To support this task, agents load an important configuration property from the EM:
# the agingTime property. This property controls how often the agent will report
# dependency data to the EM.
#
# The property works like this:
# 1) When the agent observes a new application dependency, it reports and then caches it.
# 2) Cached activity is not reported.
# 3) After the agingTime interval has elapsed, the agent removes the dependency from its cache.
# 4) The next occurrence of the dependency will be treated as per step 1).
#
# In this way, the agingTime property affects both the "freshness" of the map displays,
# and the resulting performance overhead on the Agents and EM.
#
# If the property is set to:
# - ...a lower value, maps will show a more real-time picture of application activity,
# while incurring more Agent and EM overhead.
# - ...a higher value, maps will show a less up-to-date picture of application activity,
# and make fewer demands on Agent and EM performance.
#
# For more information, see the Introscope Sizing Guide.
#
# The property is not hot configurable, and if changed the connected agents should be
# re-started to use the new aging value set in this file.
# The agingTime property defaults to 86400000 ms, or 1 day.
introscope.apm.data.agingTime=1 DAY
# Data Time Window is a period that would used to get dependency map.
# For Example, if Data time window is 3 days,
# The workstation will pull the dependency map for 3 days
introscope.apm.data.timeWindow=3 DAYS
###################################
# Map Data Pruning Config
#
# ================
# Application dependency data is pruned from the database
# according to these properties.
#
# WARNING: If the preservation age is set too low (to SECONDS),
# data might be deleted as it arrives.
#
# Default values for these properties are:
# introscope.apm.pruning.enabled=true
# introscope.apm.data.preserving.time=365 DAYS
# introscope.apm.pruning.cron.trigger.expression=0 0 6 * * ?
#
###################################
# Set to true to enable pruning
# Set to false to disable pruning and keep all data indefinitely
# This property should always be disabled in collector mode but needs to be
# enabled in standalone mode. ApmPropertyService class
# sets this property to false when collector is initializing.
introscope.apm.pruning.enabled=true
# This property determine the maximum preservation age for
# application dependency data. Data older than the preservation age will be pruned.
# Number of time units to use when calculating the preservation age
introscope.apm.data.preserving.time=365 DAYS
# This property controls how often the database is pruned of old data.
# It is formatted as an opensymphony quartz scheduler expression.
# This example prunes the database every minute, every hour:
#introscope.apm.pruning.cron.trigger.expression=0 0/1 0-23 * * ?
# By default, the prune task runs every day at 6 AM:
introscope.apm.pruning.cron.trigger.expression=0 0 6 * * ?
###################################
# Home Dashboard Config
#
# ================
# Default home dashboard loaded by the workstation is set by
# these properties. If this dashboard cannot be loaded the first
# available dashboard is loaded.
#
# Each individual user may override and set their own individual
# home dashboard in their user preferences.
#
# Default values for these properties are:
# introscope.workstation.dashboard.home.domain=
# introscope.workstation.dashboard.home.module=Sample
# introscope.workstation.dashboard.home.dashboard=An Intro to Introscope
#
# NOTE: If the dashboard has been translated to multiple languages, specify
# the dashboard name using the default language.
###################################
# The path of the domain containing the default home dashboard
# No domain path means dashboard is in SuperDomain
introscope.workstation.dashboard.home.domain=
# The name of the Management Module containing the default home dashboard
introscope.workstation.dashboard.home.module=Sample
# The name of the default home dashboard
introscope.workstation.dashboard.home.dashboard=An Intro to CA Introscope
####################################
# CEM incident web services
#
# Maximum number of incidents that may be returned by the CEM incident operations
# defined in the APM Model Web Services. Default value 500.
introscope.enterprisemanager.ws.max.incidents=500
######################################################
#APM SaaS dummy password - to be used in APMSaaS AppLogic Grid template by new WebView
com.ca.apm.webview.saas.dummyuserpassword=@@password@@
######################################################
# Properties required for enabling smartcard
# authentication in APM. Smartcard authentication
# is done in APM with the help of SCARVES server which is
# Smart Card Authentication and REvocation Service
######################################################
# whether to enable or disable smart card authentication.
#introscope.enterprisemanager.webserver.scauth.enable=true
# hostname and port of SCARVES server which validates
# and authenticates client cert from smart card
#introscope.enterprisemanager.webserver.scauth.hostname=localhost
#introscope.enterprisemanager.webserver.scauth.port=9998
# keystore details which contains the SCARVES server certificate
# to enable communication between EM and SCARVES server
#introscope.enterprisemanager.webserver.scauth.keystore=config/internal/server/daemoncert
#introscope.enterprisemanager.webserver.scauth.keypass=password
#########################################
#
# Thread dump feature properties
#
###########################################
# The property is used to enable or disable the thread dump collection on
# the Enterprise Manager i.e this disables the collection of thread dump on any agent connected
# to this Enterprise Manager.
introscope.enterprisemanager.threaddump.enable=true
# Specifies the location of the folder where the Thread dumps
# will be stored on the Enterprise Manager
introscope.enterprisemanager.threaddump.storage.dir=threaddumps
# The Thread dump files purger will clean files older than the specified days.
# specify in days
introscope.enterprisemanager.threaddump.storage.clean.disk.olderthan.days=30
# The frequency of purging the Thread dump files.
# specify in days
introscope.enterprisemanager.threaddump.storage.clean.disk.freq.days=1
# The maximum thread dump files that can be stored on the Enterprise Manager
introscope.enterprisemanager.threaddump.storage.max.disk.usage=5000
#######################################################################
# SNMP Configuration for Triage Map Alerts for SSA/Catalyst
#
# =====================================================================
# This needs to be set to the ip address of the SSA/Catalyst connector
# where the the triage map SNMP traps will be sent.
introscope.apm.catalyst.triagemapalert.snmp.destination.host.ip=
# This needs to be set to the SNMP port where the the triage map SNMP traps
# will be sent. Default value is 162.
introscope.apm.catalyst.triagemapalert.snmp.destination.trap.port=162
# This needs to be set to the SNMP community string. Default value is public.
introscope.apm.catalyst.triagemapalert.snmp.community=public
# This needs to be set to the trigger type desired for SNMP trap notifications. Default
# value is numeric equivalent of trigger Whenever Severity Changes.
introscope.apm.catalyst.triagemapalert.snmp.trigger=3
# Compression index for Transaction Tracer Optimization.
# Default index needs to be set to 3. Lowering it will cause Out Of Memory problems.
introscope.enterprisemanager.lucene.maxNumSegments=3
###############################################################################
# Change Detector Settings
#
# ==========================
# By default Change Detector is turned off on the EM. To enable change detector
# on EM change this property value to false. Its not a hot property.
#introscope.changeDetector.disable=true
###############################################################################
# Gokhan Kocak 19.12.2014
transport.outgoingMessageQueueSize=6000
transport.override.isengard.high.concurrency.pool.min.size=10
transport.override.isengard.high.concurrency.pool.max.size=10
# Gokhan Kocak 19.12.2014
com.wily.introscope.soa.deviation.enable=false