Declan_Dempsey

NOVEMBER Published Tech docs / Technical tips / Posts to CA Performance Management Community board

Discussion created by Declan_Dempsey Employee on Aug 1, 2017
Latest reply on Nov 7, 2017 by Declan_Dempsey

Hello all,

 

Here is a list of all video tutorials / tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Quickly search through the post for keywords using <ctrl> f

 

Techdocs:

Data collector disconnects on 3.2
Data collectors disconnect from the data aggregator on CAPM 3.2
Last Update: 2017-11-29    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1169159

Will Vertica Data Repository servers allow ntpd instead of chrony?
Addresses environments that continue to use ntpd in place of the current chrony tools.
Last Update: 2017-11-28    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1332456

Time Zone with 30 and 45 minutes offset from UTC/GMT are not available in CAPC
IST time zone UTC GMT +5:30 with 30 or 45 minutes offset not available in CAPC Performance Center
Last Update: 2017-11-16    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1983588

Best practice for resolving CA Performance Center when graph chart plot data lack/missing
Three major cause of the CA Performance Center graph chart plot data lack/missing
Last Update: 2017-11-16    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1985903

How to refer devices which polled specific Vendor Cert
The command level method to see which device are polled by certain Vendor Certification.
Last Update: 2017-11-13    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1096446

Several data.bak* directory created in the DataCollector apache karaf directory
Why and how the /apache-karaf-*/data directory automatically copied to data.bak, data.bak1 ... data.bak10.
Last Update: 2017-11-13    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1963462

How to gather a list of Data Aggregator devices with a specific status?
This will explain how to use a REST client to show devices specific status.
Last Update: 2017-11-08    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1627614

How to use alternate SSH port for DR in place default port 22
Install CADR 3.2 on RHEL 7.3. In step: ./dr_validate.sh -p drinstall.properties FAIL because we use non default SSH port. How to change the port for DR use to setup passwordless SSH
Last Update: 2017-11-06    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1101997

How to investigate which object made the Data Aggregator's Threshold Limit exceeding
Method of querying the Data Repository from the item ID in the Data Aggregator karaf log message
Last Update: 2017-11-06    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1469586

 

Technical tips / Posts to CA Spectrum Community board:

Title

Views

Replies

What circumstances cause change detection to be disabled for the interface metric family in 3.2? Change detection is enabled and scheduled to run every 24 hours in the associated monitoring profile.

48

2 Replies2

Device trending for groups of interfaces/components3New

33

0

Save Dashboard Column Configurations2New

47

0

Configurable Discovery Timeout, Retries, etc. CA Performance Management27New

278

7

Multi Tenancy - Workflows and REST calls for automation

149

3 Replies3

Problem New Vendor Certification

334

21 Replies21

[WEBCAST] What’s New in CA Performance Management 3.5

50

0 Replies0

Predictive Network Analytics: Active Monitoring of SDx & Cloud Environments

35

0 Replies0

 

Appears in 1 other place

 

Customizable Device Detail portlet19New

154

2

CA World 17 Session Presentations Posted!!!

76

0 Replies0

 

Appears in 2 other places

 

migration from 2.6 version to 3.2 fresh intallation

179

1 Replies1

CA PC files and processes should not belong to root after installation18Under review

179

2

askCA for CA Performance Management

93

3 Replies3

 

Appears in 1 other place

 

MAXRequest workers in httpd of ehealth

127

2 Replies2

Save Column Settings - all properties23Wish-Listed

401

4

Add support for India Standard Time to CAPM7New

124

2

Allow the New Scorecards to be over 10,000 items9Wish-Listed

192

3

Change owner of Scheduled E-mails4New

58

0

Technical Documentation

87

0 Replies0

Use Power Broker to install or upgrade3New

69

2

Dashboard Logging3New

70

0

Is there a work around for implementing Performance Center's Data Aggregator Vertica Database without needing passwordless SSH?

97

1 Reply1

Getting popup on the top of the console that "Information:server is stopped"

85

1 Reply1

CA Performance Management - 3.2 INDIA TIME ZONE SET

76

1 Reply1

Root installation of CAPM

188

6 Replies6

CA PC App: Baseline Deviations

67

1 Reply1

Tag metric in Response Test metric not available, would like to have it in future version of IM 2.X9New

293

6

askCA (AKA Office Hours) for CA Performance Management

552

2 Replies2

 

Appears in 3 other places

 

askCA Chat Transcripts (CA PM) - November 9, 2017

88

0 Replies0

OCTOBER Published Tech docs / Technical tips / Posts to CA Performance Management Community board

455

3 Replies3

PC 3.2 installation

104

3 Replies3

Goal line for On-Demand Report1New

25

0

Webcast Recap: Finding an easier and faster way to transition from CA eHealth to CA PM

183

0 Replies0

Webcast Replay: Finding an easier and faster way to transition from CA eHealth to CA PM

165

0 Replies0

 

Appears in 1 other place

 

make update_alias_name.sh SSL capable3New

160

0

Finding an easier and faster way to transition from CA eHealth to CA PM

985

2 Replies2

 

Appears in 1 other place

 

Custom Messages support for Net-Connect probe monitoring using MCS in UIM10New

92

1

Extend REST api to manage SNMP Profiles5New

66

2

 

 

OCTOBER Published Video tutorials / Tech docs / Technical tips / Posts to CA Performance Management Community board

 

Hello all,

 

Here is a list of all video tutorials / tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Quickly search through the post for keywords using <ctrl> f

 

Techdocs:

 

Unknown Devices list in CAPC.
We are using CAPM 3.1 on Linux server. We are able to generate report Network Devices Availability but not generate Unreachable & Unknown Devices. We are want to segregate report form CAPM. Please check this issue & give us solution.
Last Update: 2017-10-31    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1155553

Why do the number of devices in my Spectrum collection differ from the data source Spectrum collection in CAPC?
This article explains why the number of devices in the Spectrum collection may differ from the Spectrum data source collection on CAPC.
Last Update: 2017-10-30    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1808336

How to add a custom logo to CABI 6.3 JasperServer reports for CAPC integration
how to add custom logo CABI JasperServer jasper Performance Management TopN report CAPC integration
Last Update: 2017-10-30    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1218848

'Search' function in CAPC Views does not find items' Name Alias
Search box function string in CAPC View doesn't find item Name Alias and returns No Data To Display. CAPC not sync alias to DA
Last Update: 2017-10-30    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1108551

Can you delete a vertica archive?
Can you delete a vertica archive if you are low on disk space?
Last Update: 2017-10-27    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1019079

Vertica database restore failing
When attempting a restore of the vertica database the following error is seen: ERROR 6651: Backup node [####] is not found in this cluster
Last Update: 2017-10-27    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1053386

Is RLOGIN required for CA Performance Management component servers?
Answers whether or not RLOGIN is required on CA Performance Management component servers
Last Update: 2017-10-26    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1505577

How to restart the CA Performance Management CA Performance Center processes
In this video, we will go over how to stop and start the CA Performance Management CA Performance Center processes.
Last Update: 2017-10-24    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1200896

Trying to use CA Performance Center REST API this fails with a 403 forbidden error
Trying to use CA Performance Center REST API with an LDAP or SAML user will fail with a 403 forbidden error
Last Update: 2017-10-24    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1866952

OpenAPI queries do not return all expected component elements
Addresses an issue that may be observed in OpenAPI query results in the r3.2 GA release
Last Update: 2017-10-19    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1006947

How to configure CA Performance Center to use HTTPS (Series video 1 of 4)
In this video we will cover how to use the SsoConfig utility to begin the configuration process.
Last Update: 2017-10-19    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1313298

How to Setup and Configure MySQL Workbench to work with Database on Spectrum
I would like to know how to configure the workbench from MySQL to query tables on Ca spectrum and CAPM.
Last Update: 2017-10-19    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1014331

Can I exclude TLSv1.1 in addition to the protocols listed in the guide?
The guide currently does not include TLSv1.1 in the list of protocols to disable in the example in the guide.
Last Update: 2017-10-13    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1261166

Why is the interface monitoring profile not applied by default in CA Performance Management?
In other products such as Network Flow Ananasys, interfaces are automatically discovered
Last Update: 2017-10-13    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1546044

Data Repository cluster regularly shuts down unexpectedly.
Addresses a possible network related cause for a Data Repository cluster shutting down unexpectedly.
Last Update: 2017-10-11    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1362816

OpenAPI Query Builder Log File
Is there a log file for query builder that shows the query and execution times of those queries?
Last Update: 2017-10-11    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1404493

Is there performance impact when raising the OpenAPI MaxTopLimit value?
Addresses questions about limits to the OpenAPI MaxTopLimit value in use.
Last Update: 2017-10-09    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1834857

Custom attributes not visible in CA Performance Manager Dashboard Context pages
Addresses issue where Custom Attributes are not visible in CA Performance Manager Dashboard Context pages but are seen in other View types.
Last Update: 2017-10-04    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1525043

How to change the port used by the CAPC website
Changing the CAPC website port. The example provided shows a change to use port 80 instead of the default port 8181.
Last Update: 2017-10-03    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1106709

 

Technical tips / Posts to CA Spectrum Community board:

Title

Views

Replies

Product Videos and Webcasts

434

5 Replies5

askCA (AKA Office Hours) for CA Performance Management

37

0 Replies0

Delete Custom Attributes

54

5 Replies5

PM and Y1731 IPLSA test

101

6 Replies6

Get Your NetOps on at #CAWORLD '17!!

46

0 Replies0

 

Appears in 2 other places

 

Periodic status updates from CA for ideas with more than 30 votes.59Under review

1268

21

ADDITIONAL DEVICE TYPES NEEDED IN CAPC CONFIGURABLE IN THE "DEVICETYPES.XML" FILE60Under review

407

9

csv export usable formatting7Under review

81

1

Need to increase max number of charts for ON-demand Charts per Item with multi-metric view types6New

128

2

CA Performance Management General Features Videos

49

0 Replies0

CAPM :: Seeding CAPM with Devices to Discover By Invoking One REST API Call4New

238

0

Selectively discover devices from other data sources38Under review

520

14

Include recommendation for data and catalog partition sizes in the Sizing tool13Under review

218

1

CAPC 3.2 and APM 10.5.x integration steps

30

1 Reply1

Out-Of-The-Box process monitoring for cpu, memory, ...7New

162

0

Dashboards: Ability to show Metric OID17Delivered

256

16

Going to CA World '17? Get Your NetOps Session Guide Here!

425

0 Replies0

 

Appears in 2 other places

 

UPDATED: Going to CA World '17? Get Your NetOps Session Guide Here!

68

0 Replies0

 

Appears in 2 other places

 

Beta is coming ...

270

6 Replies6

 

Appears in 2 other places

 

CAPM Integration with VNA error

91

4 Replies4

FULL STACK NETWORK MONITORING TRIAGE

39

0 Replies0

 

Appears in 2 other places

 

Product Management Contacts

1533

0 Replies0

Formatting of Stats in Reports, Web GUI, and Dashboards4New

83

2

Allow NFA views in CAPC to have the option of more elements than just top 1016Under review

167

2

NFA views should be available to be displayed in CA PC71Under review

413

6

CA PC should be able to show stacked-protocol-trends for (Site-)Groups74Under review

733

8

CA PM- Users export2Delivered

83

5

CAPC Exclude Timeframe for Event Rules21Under review

232

9

"Manage Email Schedules"1New

28

0

Turn On/Off Threshold Profile Alert Event Forwarding To Spectrum Per Profile12New

138

2

Network Weather Map API10New

166

2

Tech Tip: Customize CA PC auto-refresh interval

41

0 Replies0

Retain historical data after devices/components/history go inactive3Under review

59

1

Historical Statistics from a shutdown port7New

116

2

Change Dashboard Permissions5Under review

75

1

CA PC/PM - Option to set Threshold in IM Table (Top) view7Under review

109

3

Multitenancy administration simplification5Under review

93

3

Customizable Device Detail portlet18New

134

2

CA PC/PM :Add option to copy/move Dashboard created under My Dashboards to another menu9Under review

129

1

95 Percentile barchart on CPU Utilization Statistic view0New

109

1

Automatic report generation without E-mail by CAPC53Under review

457

3

askCA (AKA Office Hours) for CA Performance Mgt.

151

3 Replies3

SNMP V3 AES-256 for CAPC Discovery9Currently Planned

143

2

SNMPv3 AES256 for CA PM28Currently Planned

654

8

Absence of a GUI for handling IPSLA (Response Path) Tests5New

60

0

CAPC user last login12New

121

1

Bidirectional integration between CAPM and IBM Netcool5New

188

1

LiveView with fast poll rates54Under review

315

7

Print all pages of Dynamic Views10Under review

216

1

Allow the New Scorecards to be over 10,000 items7Wish-Listed

131

3

 


Subject: SEPTEMBER Published Video tutorials / Tech docs / Technical tips / Posts to CA Performance Management Community board

 

Hello all,

 

Here is a list of all video tutorials / tecdocs / Technical tips & posts (including updates to older posts) to CA Performance management Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Quickly search through the post for keywords using <ctrl> + f 

 

Techdocs:

 

Update CA Performance Management interface name alias
The Interface Alias name does not updated even the device rediscovered.
Last Update: 2017-09-27    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1118263

CAPC 3.2 fails to start after reboot
new capc rh7.3 install. console service would not start.
Last Update: 2017-09-26    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1355483

How to add an additional data location to the Data Repository
Use this procedure to add an additional DATA & TEMP storage location when you are unable to extend the storage space available on the current drive that houses the data directory.
Last Update: 2017-09-25    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1388314

DA datasource failing to synch with error.
My DA datasource is failing to synch and we are seeing this error in the DMService.log: Data source Data Aggregator@*.*.*.* encountered an error while processing a sync request. The problem is in the data source, not CAPC. Check the logs for the data so
Last Update: 2017-09-25    Size: 82 kb     Type: Knowledge Base Articles    ID: TEC1485289

How to Clear the Item and Group Cache in CAPC
Clearing the item and group cache may be needed from time to time to help resolve an issue. Clearing the item and group cache can be helpful when having synchronization issues in CAPC.
Last Update: 2017-09-25    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1880921

Error one of the DR (Vertica ) cluster node restart
When the client start Vertica database from the adminTools, one of the DR cluster node process still running.
Last Update: 2017-09-25    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1916897

HTTP 503 error, service unavailable when trying to access CAPC
After installing CAPM 3.2 on Redhat 7.3, you will see an HTTP 503 error, service unavailable when trying to access CAPC
Last Update: 2017-09-24    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1407324

Newly discovered device shows old deleted devices Alias value.
Addresses a situation where an old deleted devices alias value appears against a newly discovered device.
Last Update: 2017-09-22    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1864858

Will updating my OS version of Java impact PM?
Received message that version of Java is open to vulnerabilities and needs to be patched
Last Update: 2017-09-21    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1852069

How to check connectivity between CA Performance Management components without telnet
Telnet is found on fewer and fewer systems and therefore cannot be used to check connectivity on those systems. The curl command is often found on these systems and can be used to check connectivity
Last Update: 2017-09-18    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1334743

CA Performance Center Services crashing
This article shows a possible cause of performance center crashes and how to correct it.
Last Update: 2017-09-15    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1335542

Metric Families is Blank - No Data do Display
Tried to change the Vendor Priority and Manage the Metric Families, but its empty
Last Update: 2017-09-14    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1515938

CA Performance Center Data Source Compatibility Matrix
CA strives to meet our clients' diverse and ever changing needs by focusing on ensuring compatibility of the latest versions of our products We test a variety of combinations of CA
Last Update: 2017-09-13    Size: 15 kb     Type: Product Status

CVE-2017-5638 Struts Vulnerability for CA Spectrum 10.x
Vulnerability details for CVE-2017-5638 struts 2
Last Update: 2017-09-12    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1950433

Does CVE-2017-9805 afect CAPM
Is CAPM vulnerable to the newest Apache Struts Vulnerability (S2-052)
Last Update: 2017-09-11    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1993486

Active Directory authentication in multiple domains for CAPC
Two organizations are merging. We need to authenticate users from two AD Domains. How can this be achieved using CAPC?
Last Update: 2017-09-08    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1168933

How to add custom metrics to Self Monitoring Certifications
Discusses the options to add custom or new metrics to Data Aggregator and Data Collector Self Monitoring Certifications.
Last Update: 2017-09-08    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1579125

How do I remove inactive elements?
Generally you get inactive elements when you remove a monitoring profile from a collection. This article shows how to clean them up.
Last Update: 2017-09-08    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1079296

One Vertica node in a 3 node cluster is in a constant "recovering" state when trying to start the database.
This article provides a possible resolution to the problem of a Vertica node being in a constant "recovering" state when trying to start the database.
Last Update: 2017-09-08    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1675494

While attempting to perform a backup of the database receive error; Error: Missing critical file: rsync://[IP]:/path/Snapshots/.../[file].manifest
Unable to backup database due to Missing critical file error
Last Update: 2017-09-08    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1497172

Why is "No Data Collectors installed" shown under "State" in the discovery profiles list
After adding a new IP Domain and discovery profile, the Discovery Profile shows "No Data Collectors installed"
Last Update: 2017-09-07    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1858204

After power loss Vertica won’t start.
We lost power and now Vertica won’t start on any of the cluster nodes.
Last Update: 2017-09-07    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1460576

Threshold Profiles in CAPC
How to set up and configure Threshold Profiles in CAPC to generate events.
Last Update: 2017-09-02    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1302497

HTTP/1.1 401 Unauthorized error running CA Performance Management Top N report in CABI 6.3
CABI report failure with error sed by: net.sf.jasperreports.engine.JRException: Unable to load schema version:net.sf.jasperreports.engine.JRException: Response is HttpResponseProxy{HTTP/1.1 401 Unauthorized [WWW-Authenticate: Basic realm=OpenAPI, Content
Last Update: 2017-09-01    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1195763

 

Technical tips / Posts to CA Spectrum Community board:

Title

Views

Replies

Network Weather Map API8New

118

1

RPM  Juniper

50

3 Replies3

CA PM 3.5 / CA VNA 3.5 - Second Sprint Review

40

0 Replies0

Save Column Settings - all properties21Wish-Listed

339

4

Customizable Device Detail portlet18New

101

1

CA Performance Center to both install and execute as a sudo user11New

236

0

DA/DC should be able to poll String type.9New

164

3

Query max utilizationIn/utilizationOut in CAPC

36

1 Replies1

Vendor Cert "Cisco IPSLA Jitter"18New

160

1

Stop using Abode Flash in CAPC28Under review

256

4

Round Trip Time Configuration and view Results

117

5 Replies5

unable to schedule the job in ehealth job id100016

66

1 Replies1

Ability to SSL enable the Data Aggregator10New

94

1

Details tab on Device Context Page11New

165

3

LiveView with fast poll rates53Under review

290

7

CA PC/PM :Add option to copy/move Dashboard created under My Dashboards to another menu8New

86

0

Beta is coming ...

161

1 Replies1

 

Appears in 2 other places

 

PRESS RELEASE: CA Recognized as Network Monitoring Innovator

57

0 Replies0

 

Appears in 2 other places

 

Red Hat Packages to Install Performance Center 3.1

41

0 Replies0

Perfomance Center - HTTP ERROR 500

68

1 Reply1

data in table ifstats_rate vertica database

88

3 Replies3

CAPC user last login11New

103

1

NFA views should be available to be displayed in CA PC70Under review

397

6

User dashboard view for metrics families assigned to a device2New

88

2

Integration CAPM - Spectrum: Add more variables in threshold events15Under review

236

2

Historical Statistics from a shutdown port4New

56

1

Bidirectional integration between CAPM and IBM Netcool4New

160

1

Ability to save column sort order in a CA PC Report Template9New

109

0

CA PM - Add Device Health Reports in CA PM similar to CA eHealth Health reports16New

139

1

Idea - Make the Rate tag available for all counters11New

164

2

Allow the addition of new Units as part of Self-Certification process9New

284

6

CA PC/PM - Option to set Threshold in IM Table (Top) view5New

66

2

Print all pages of Dynamic Views8Under review

180

1

Print only saves current page32Under review

268

6

Turn On/Off Threshold Profile Alert Event Forwarding To Spectrum Per Profile12New

103

0

Formatting of Stats in Reports, Web GUI, and Dashboards3New

47

0

Multitenancy administration simplification5New

63

2

Changeable axis label for a better understanding7New

89

2

Change Dashboard Permissions4New

38

0

Do Not Limit View Choices When Editing Dashboard Or Context15Under review

169

3

CA PM 3.5 / CA VNA 3.5 - First Sprint Review

119

1 Reply1

CA and Versa Networks Partner for SD-WAN Monitoring

46

0 Replies0

 

Appears in 2 other places

 

CA PM- Users export2New

52

2

Selectively enable/disable interface polling36Under review

385

12

Group Percentiles Report

35

0 Replies0

OpenAPI: CAPC Alias Names needed17Currently Planned

205

5

LIVE NETOPS DEMO: This Thursday, Sept 14th; 1pm EST

54

0 Replies0

 

Appears in 2 other places

 

Delete retired devices by using GUI19Wish-Listed

272

15

Dashboards: Ability to show Metric OID17Delivered

199

14

Multi Tenancy - Workflows and REST calls for automation

47

1 Reply1

Predictive Network Behavior

65

0 Replies0

 

Appears in 2 other places

 

Tech Tip: Calling OpenAPI/odata query from curl

168

1 Reply1

How to Customized Dashboard In CA Performance Management 3.1

41

0 Replies0

AUGUST Published Tech docs / Technical tips / Posts to CA Performance Management Community board

199

2 Replies2

Feed CA PM With Aggregated Metrics

68

0 Replies0

HTTP/1.1 401 Unauthorized error running CA Performance Management Top N report in CABI 6.3

31

0 Replies0

 

 

AUGUST Published Tech docs / Technical tips / Posts to CA Performance Management Community board

 

Hello all,

 

Here is a list of all video tutorials / tecdocs / Technical tips & posts (including updates to older posts) to CA Performance management Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.

 

Quickly search through the post for keywords using <ctrl> + f

              

 

Techdocs:

 

CA Performance Center LDAP krb5.conf file contents
If the system CAPC is on can authenticate via kerberos, then the system level krb5.conf file can be used when configuring LDAP
Last Update: 2017-08-31    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1895591

Mouse-over popups Don’t work in some interface level views.
If you hold the mouse over a point on a graph in a dashboard view, a detail popup should open. This is not working on all views.
Last Update: 2017-08-31    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1410391

Login Timeout in CAPC
How can I control the login timeout in CAPC?
Last Update: 2017-08-30    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1472957

How to change the launch back URL from Spectrum to CAPC to be a fully qualified address
When you integrate Spectrum and CAPC and you initiate the launch back URL by right clicking a device in Spectrum and choosing CA Performance Center it shows the CAPC IP address. How can I make it show the fully qualified domain name?
Last Update: 2017-08-27    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1760263

Support for Google WeatherMap Related Issues in Performance Management
This KB Article tells you where to go to get support on Google WeatherMap related issues in Performance Management.
Last Update: 2017-08-26    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1551508

Average CPU Utilization of a multi-cpu system
When we look at the "System Health" tab for a device, there is a view called "Average CPU Utilization Trend with Events" Does this represent the average of all CPU's? .
Last Update: 2017-08-23    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1736042

Unable to upgrade the Data Aggregator
During the installation the Data Aggregator it is unable to connect to the Data Repository
Last Update: 2017-08-21    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1285774

Inconsistent Device Status and Reachability
CAPC in PM 2.6 displays contradicting device status and reachability. For example, it may show the device is "Reachable", while the status is "Management Lost".
Last Update: 2017-08-19    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1714937

The "Last Discovered" time-stamp under Monitored Devices' Polled Metric Families does not change after re-discovery.
The "Last Discovered" time stays the same after re-discovering the device. The date and time does not change.
Last Update: 2017-08-19    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1002196

How to re-balance the load on a Data Collector?
When a data collector becomes overloaded , how can it be re-balanced
Last Update: 2017-08-19    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1546125

CA Performance Management CAPC process down
CAPC process automatically restarted by CAPC wrapper. Cause: CAPC response was timed out.
Last Update: 2017-08-16    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1326359

where is dbconnection.cfg on DA
dbconnection.cfg file on DA contains credential that can be used for accessing vertica database on DR. So it's important that you know the location of the file.
Last Update: 2017-08-15    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1803804

Activenmq will not start on the data aggregator
After a successful installation of the data aggregator with a sudo user account activemq will not start. The error is: /etc/init.d/activemq start Starting ActiveMQ ERROR: There are syntax errors in '/etc/default/activemq'
Last Update: 2017-08-11    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1156498

Some models in Spectrum are not being sent to CAPC for discovery.
Added 100 models to the ipdomains container in Spectrum but only 50 show up in the discovery profile pushed to CAPC.
Last Update: 2017-08-10    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1089034

Data repository upgrade failed
RPM must be upgraded locally, first. Local version = 7.2.3-011 RPM version = 8.1.0-004 Installation FAILED with errors.
Last Update: 2017-08-10    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1642039

How can I get a list of full IP Addresses from eHealth for discovery in CA Performance Management?
This article provides a was to export the IP addresses in eHealth for discovery in CA Performance Management.
Last Update: 2017-08-08    Size: 82 kb     Type: Knowledge Base Articles    ID: TEC1124846

When trying to change values in an SNMP profile on the Data Aggregator via REST, a '403 Forbidden' error is returned
Data Aggregator REST API Change SNMP Profile values
Last Update: 2017-08-08    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1849414

CA Performance Management: CA Performance Center Fix Strategy
Last Update: 2017-08-06    Size: 9 kb     Type: Product Status

CA Performance Center Data Source Compatibility Matrix
CA strives to meet our clients' diverse and ever changing needs by focusing on ensuring compatibility of the latest versions of our products We test a variety of combinations of CA
Last Update: 2017-08-06    Size: 15 kb     Type: Product Status

CA Performance Management: Data Aggregator Fix Strategy
Last Update: 2017-08-06    Size: 9 kb     Type: Product Status

Performance Center gets error on Threshold profiles after Upgrade
Threshold profiles gets Query Failed
Last Update: 2017-08-03    Size: 83 kb     Type: Knowledge Base Articles    ID: TEC1495752

 

Technical tips / Posts to CA Spectrum Community board: