Hello Jbovee,
Here are the traps which were enabled by most of the customer in my experience. It all depends on your requirement and environment.
1) Syslog
2) Environmental
3) BGP/OSPF
4) Reboot traps
As usual we need to configure snmp strings/port/trap destination on the device and the same should be provided under auto discovery option of vnm model in Oneclick.
Few more traps based on your requirement:
aaa-server — Send AAA notifications.
bgp—Sends Border Gateway Protocol (BGP) state change notifications.
bstun—Sends Block Serial Tunneling (BSTUN) notifications.
calltracker—Sends CallTracker notifications.
config—Sends configuration notifications.
dlsw—Sends data-link switching (DLSw) notifications.
ds0-busyout—Sends ds0-busyout notifications.
ds1-loopback—Sends ds1-loopback notifications.
dspu—Sends downstream physical unit (DSPU) notifications.
dsp—Sends digital signal processing (DSP) notifications.
entity—Sends Entity Management Information Base (MIB) modification notifications.
envmon—Sends Cisco enterprise-specific environmental monitor notifications when an environmental threshold is exceeded.
frame-relay—Sends Frame Relay notifications.
hsrp—Sends Hot Standby Router Protocol (HSRP) notifications.
isdn—Sends Integrated Services Digital Network (ISDN) notifications.
msdp—Sends Multicast Source Discovery Protocol (MSDP) notifications.
llc2—Sends Logical Link Control, type 2 (LLC2) notifications.
repeater—Sends standard repeater (hub) notifications.
rsrb—Sends remote source-route bridging (RSRB) notifications.
rsvp—Sends Resource Reservation Protocol (RSVP) notifications.
rtr—Sends SA Agent (RTR) notifications.
sdlc—Sends Synchronous Data Link Control (SDLC) notifications.
snmp—Sends Simple Network Management Protocol (SNMP) notifications (as defined in RFC 1157).
stun—Sends serial tunnel (STUN) notifications.
syslog—Sends error message notifications (Cisco Syslog MIB). Specify the level of messages to be sent with the logging history level command.
tty—Sends Cisco enterprise-specific notifications when a Transmission Control Protocol (TCP) connection closes.
voice—Sends voice notifications.
x25—Sends X.25 event notifications.
xgcp—Sends External Media Gateway Control Protocol
HTH
Kalyan