DX NetOps

Good day Everyone,

I have a trap which I am receiving from my HP MSM760 Controller indicating that one of the AP's is down, But I am struggling to find the MIBS Required to resolve it.    Anyone know where I can get the MIB for 1.3.6.1.4.1.11.2.14.11.6.4.4.2.6.1?

Below is the event that is generated.

Event : Unknown alert received from device HP MSM760 Controller of type GnSNMPDev. Device Time 57+16:41:50. (Trap type 1.3.6.1.4.1.11.2.14.11.6.4.4.2.6.1)

             Trap var bind data:

             OID:  1.3.6.1.2.1.1.3.0  Value:  498491000

             OID:  1.3.6.1.6.3.1.1.4.1.0  Value:  1.3.6.1.4.1.11.2.14.11.6.4.4.2.0.1

             OID:  1.3.6.1.4.1.11.2.14.11.6.4.4.1.1.1.1.3.4220942  Value:  A0:48:1C:55:D5:23

             OID:  1.3.6.1.4.1.11.2.14.11.6.4.4.1.1.1.1.4.4220942  Value:  RRM

             OID:  1.3.6.1.4.1.11.2.14.11.6.4.4.1.1.1.1.5.4220942  Value:  AP power change

             OID:  1.3.6.1.4.1.11.2.14.11.6.4.4.1.1.1.1.7.4220942  Value:  Radio (port='A0:48:1C:35:96:80') power level has been changed from level (value='23') dBm to level (value='23')

             OID:  1.3.6.1.4.1.11.2.14.11.6.4.4.1.1.1.1.1.4220942  Value:  2

             OID:  1.3.6.1.4.1.11.2.14.11.6.4.4.1.1.1.1.8.4220942  Value:  2015-01-28 08:32:34,012

             OID:  1.3.6.1.6.3.1.1.4.3.0  Value:  1.3.6.1.4.1.11.2.14.11.6.4.4.2

Created By : System

Cleared On :

Cleared By :

Thank YOU

Neil,

Did you try the manual mapping? Map the trap to -> Event in the alertmap file which is in the custom directory?

Kalyan

Have a look at the event configuration guide under spectrum bookshelf

Thanx ...looked at mapping the trap, but missing the HP-WLAN-NOTIFICATION-MIB. Which I am unable to find anywhere. Anyone know where I can download it?

For manual mapping Mib is not required.