PaulWegs

snmptd Trap Monitor not showing traps

Discussion created by PaulWegs on Mar 11, 2013
Latest reply on Mar 4, 2016 by benzaam

Hi,

I've been trying to configure the snmptd probe to collect traps from an IBM Storwize V7000. I thought I had everything configured ok, but when I open the trap monitor in the snmptd probe, and attempt to generate a message from the V7000, nothing appears.

I turned the logging up on the probe to full and restarted the probe. I ran through the same test again, and I can see the snmp trap being received by the probe with all the message details, but still no sign of it in the trap monitor, and it doesn't generate an alarm.

I've installed the IBM-SVC-MIB into the probe, and have created profiles for it.

 

Is there something else I may be missing in my configuration?

 

Thanks,

Paul.

Outcomes