DX Unified Infrastructure Management

  • 1.  No Alarm on Reboot

    Posted Jan 09, 2012 09:49 PM

    I configured a CDM probe on one of my servers.  Ensured that 'Detected Reboot' is checked off on the Advanced Tab.  When I reboot my server, I do not get an Alarm.  Any thoughts?

     

    I opened a case w/ Nimsoft Support but no response back from them.



  • 2.  Re: No Alarm on Reboot

    Posted Jan 09, 2012 11:21 PM

    Some thoughts:

     

    • Are you sure there are no filters configured on the NAS that would block that alarm from that robot?
    • Are you sure that other alarms from that robot are making it to NAS? If you use the Probe Utility on the controller probe (Ctrl+P), you can use the test_alarm callback to generate an alarm message that will take the same path to the NAS.
    • You can use the DrNimBUS utility to sniff the messages on the bus and check whether the alarm message arrives at the NAS.