gengquist

Multiple hubs not connecting through secure tunnels

Discussion created by gengquist on May 9, 2011
Latest reply on May 10, 2011 by gengquist

Hello,

 

I am having trouble with multiple hubs not connecting to my domain via secure tunnels. We have port 443 open on our end, we can telnet into the server from the client site over port 443. However, when I install the hub and initialize the tunnel, after the hub starts I see the following (the ***.xx.***.*** is actually the IP of my external hub)

 

May  9 07:58:11:556 [1452] hub: -----
May  9 07:58:11:556 [2344] hub: hubi main thread started
May  9 07:58:12:868 [9064] hub: CORE server is not active
May  9 07:58:12:962 [10224] hub: CTRL  could not connect to server ***.xx.***.***/443
May  9 07:58:42:445 [9664] hub: CTRL Ext_HUB_04 is starting with tunnel id TL1876008973
May  9 07:58:43:430 [9664] hub: CTRL Ext_HUB_04 added /MedQuistNOC/Ext_HUB_04 10.100.5.239/48004
May  9 07:58:58:616 [9664] hub: CTRL Ext_HUB_04 could not connect to server ***.xx.***.***/443
May  9 07:59:00:679 [9664] hub: CTRL Ext_HUB_04 could not connect to server ***.xx.***.***/443
May  9 07:59:03:866 [9664] hub: CTRL Ext_HUB_04 could not connect to server ***.xx.***.***/443

 

As stated in the subject, I see this with multiple hubs, the rub however, is some of them are connected and displaying this message. Any ideas how I can further trouble shoot this issue?

Outcomes