DX Unified Infrastructure Management

Hi All,

   How to automatically  monitor the available partitions in cdm .As of now we used to enable each partition which we need to monitor .There is anyway to enable monitoring for all partition when the device added.

Thanks!

https://na4.salesforce.com/articles/HowToProcedures/How-to-enable-cdm-to-automatically-monitor-new-disks?popup=true

I have edited the below in  fixed default in cfg,but still the disks are not auto enabled

<disk>

   <fixed_default>

      active = yes

      qos_disk_usage = yes

      qos_disk_usage_perc = yes

Try removing the disks from the probe configuration and then deactivating->reactivating the probe.