Need to check the connectivity of port from one server to other .How to enable port monitoring in UIM ?Netconnect is the right probe ?
Yes. Netconnect is the right probe for this.
How to check connectivity of two devices with some port ..(TCP test)
If both systems have a robot, you can deploy the netconnect probe on each system and perform a remote port check on each system.
If checking the connectivity between two devices you can cross-check the 2 systems as Benjamin mentioned, or if you want to check that connectivity is available from other locations you can install the net_connect probe on a 3rd (or more) system to check both systems from one (or more) place. In either case, the configuration is essentially the same, the only difference being where you are installing and configuring the probe.
Will this support TCP ports only? or can it also check UDP?
This is TCP and ICMP only. I don't believe it would be possible to test UDP.
UDP is not possible
Retrieving data ...