This is regarding addition of circuits in UMP.
I got a request to add bulk of circuits on UMP and each circuit is having 3-4 Interfaces.
Is there any easy and short way to add them in bulk may be 100 circuits at a time.
What protocol do they respond to for monitoring ?
SNNP or any other protocol ?
If SNMP you can import the IP or provide a range and run a discovery against them, once discovered you can use SNMP collector to collect the needed information .
It also depends on what is that you want to monitor for these circuits?
as Phani mentioned depending on what protocol your devices respond to, you could set up a discovery scope including the login information in the USM (see Launch the Discovery Wizard - CA Unified Infrastructure Management - 8.4 - CA Technologies Documentation ).
Once the discovery has added your devices into the inventory, and assuming these are SNMP devices, you can use the SNMPcollector probe to set up a template for these devices (what metrics you need etc) and then query the discovery server for its inventory data to automatically create profiles for these devices and apply the applicable templates.
(see snmpcollector Configure Monitoring with Templates - CA Unified Infrastructure Management Probes - CA Technologies Docume… and snmpcollector AC Configuration - CA Unified Infrastructure Management Probes - CA Technologies Documentation )
Let us know if this helps your further.
CA Tech Support
Retrieving data ...