Lluis_Domenech

Latest Knowledge Base Articles published for CA Privileged Access Manager (21-Nov-2016)

Discussion created by Lluis_Domenech Employee on Nov 21, 2016

Hello,

 

Here I'm posting the latest Knowledge Base Articles for CA Privileged Access Manager published or updated since 01-Oct-2016.

 

Windows Proxy fails to start on Windows Core 2008 R2

The 2.6 Windows Proxy was installed successfully on a domain controller running Windows Core 2008 R2.
Last Update: 2016-11-18    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1465084

 

Is there any procedure to upgrade the PAM releases?
This document will explain what you should be taking care before implementing an update.
Last Update: 2016-11-17    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1662318

 

After logging into CA PAM there is a message: "Bind Failure" "The following loopback addresses could not be loaded..."
This document describes what this message means, what effect it has to the user & some possible causes.
Last Update: 2016-11-15    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1116109

 

Can I create an RDP Transparent login script even if i cannot choose the fields by using the name in the Transparent Login Learning Tool ?
How to configure the Transparent Login Script even if it is not possible to choose an input field using the Transparent Login Learning Tool
Last Update: 2016-10-27    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1107777

 

Updating the password for an account in AD fails with errors 5759 and 1604 in the password update report. Still one can access the target device using that account. What happens ?
Password update error may fail with error 5759 and 1604 if the account OU or AD path has changed
Last Update: 2016-10-27    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1590723

 

In some servers we are not able to change the password and we are getting error codes 15520 and 5995 in reports. What is happening ?
Password aging policy conflicting with attempts at changing the password before the time comes may cause these errors to occur
Last Update: 2016-10-27    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1719862

 

Dirty COW Vulnerability
Is CA PAM vulnerable to the Linux Dirty COW vulnerability?
Last Update: 2016-10-25    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1236904

 

How do I find out who deleted a user from Password Authority?
A user was deleted and we needed to know who deleted that user.
Last Update: 2016-10-21    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1026242

 

How to configure the Schedule Backup for PAM with SCP and SFTP
This will guide you how to configure the PAM Schedule Backup feature using SCP and SFTP protocols.
Last Update: 2016-10-21    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1425573

 

What means the "Next Update" column in Config > Certificate Info?
When we go to "Config Certificate Info" there is a table with the following columns: Delete | Issuer | Next Update | Status | File Name | Distribution Point | Fail Reason Whats that "Next Update"?
Last Update: 2016-10-21    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1973309

 

How to configure the Schedule Backup for PAM with CIFS/NFS
This will guide you how to configure the PAM Schedule Backup feature using CIFS and NFS protocols.
Last Update: 2016-10-21    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1127973

 

Trying to use Putty as a service in 2.7 fails with error "X11 forwarding services are not permitted"
When configuring Putty as a TCP/UDP service, login to a remote device fails always with an X11 error, which did not happen in previous versions
Last Update: 2016-10-20    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1094676

 

How to find out the PAM Appliance MAC addresses
We need to identify MAC addresses on switch ports. How do we identify which MAC addresses are associated with which interfaces on the CA PAM hardware appliance?
Last Update: 2016-10-18    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1359482

 

Unable to create access policies for servers
When I click SAVE I get the error message: Message 20: Error occurred while trying to complete request. (76)
Last Update: 2016-10-14    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1568022

 

PAM RemoteCLI Error Message
We are attempting to utilize the CLI functionality in PAM, but after review all of the available documentation (limited), when we run the capam_command script we get error "Server returned HTTP response code: 403".
Last Update: 2016-10-11    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1640445

 

Tip: Why is port 8550 being queried when starting an RDP session & what effect does this have on the RDP session?
This tip explains why port 8550 is queried when starting an RDP session, the effect this has on RDP sessions starting & how to mitigate this effect.
Last Update: 2016-10-10    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1215493

 

How-To: Collect Java Trace Logs for CA PAM Issues
Step-by-step guide on how to collect Java trace logs to provide to CA Support for troubleshooting issues.
Last Update: 2016-10-10    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1383294

 

Use different Workflow settings for the same managed account
We need to manage a Linux account, but we need a user group that uses this account without an approval workflow, and another user group that uses the same account with a previous approval workflow. How can I get this scenario?
Last Update: 2016-10-07    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1159432

 

Command Filter List doesn't work
The command filter list works OK on Solaris 10 using the Bourne shell, but it doesn't work after changing to the bash shell during the session.
Last Update: 2016-10-07    Size: 83 kb    Type: Knowledge Base Articles    ID: TEC1351945

 

Note that you can always access the full list going to this link:

http://www.ca.com/us/services-support/ca-support/ca-support-online/support-by-product/ca-privileged-access-management.html?d=t&type=Knowledge&sortby=daten&page=1&typeofcontent=Knowledge%20Base%20Articles
 

I hope it helps.

 

Best Regards,

Lluis Domenech

Support Delivery Manager

Outcomes