AnsweredAssumed Answered

secondary hub is not seen after installation

Question asked by pivst01 Employee on Apr 24, 2017
Latest reply on Apr 25, 2017 by Garin

Hi All,

 

what could be the reason if i installed a sec hub and it cant be seen either in Infrustructure manager nor in Admin console.

 

the installation output was:

 

Starting NimBUS:

Waiting for Hub to start...

Are you setting up a Tunnel between this Hub and another Hub?
==>[no]

Would you like to initialize the security settings on this Hub (WARNING: This will have widespread consequences as it will reset security for the entire domain)?
==>[no]
Cleaning up temporary files
Finished Robot installation!

 

the hub is up:

root 3260 1 0 14:07 ? 00:00:00 ./nimbus /opt/nimsoft
root 3262 3260 0 14:07 ? 00:00:00 nimbus(controller)
root 3263 3262 0 14:07 ? 00:00:00 nimbus(hub)
root 3294 3262 0 14:07 ? 00:00:00 nimbus(distsrv)
root 3295 3262 0 14:07 ? 00:00:00 nimbus(hdb)

 

and the ports 48000-48002 are  reachable from the primary hub (via telnet).

 

i noticed these log entries, but i didnt congfigure SSL on the primary hub, so im not sure, whether it;s related:

 

Apr 24 14:07:16:834 [139662897178368] Controller: --------------------------------------------------------------------------------------------------------
Apr 24 14:07:16:834 [139662897178368] Controller: ----- Robot controller 7.80 [Build 7.80.3132, Jun 1 2015] started -----
Apr 24 14:07:16:834 [139662897178368] Controller: Name = uimsechub, IP = 192.168.5.35, Port = 48000
Apr 24 14:07:16:834 [139662897178368] Controller: OS = UNIX / Linux / Linux 2.6.32-431.el6.x86_64 #1 SMP Fri Nov 22 03:15:09 UTC 2013 x86_64
Apr 24 14:07:16:834 [139662897178368] Controller: Domain = uim_mydomain_domain
Apr 24 14:07:16:834 [139662897178368] Controller: Primary HUB = /uim_mydomain_domain/uimsechub/uimsechub 192.168.5.35
Apr 24 14:07:16:834 [139662897178368] Controller: Loglevel = 0, Logfile = controller.log
Apr 24 14:07:16:835 [139662897178368] Controller: Running as user root (0)
Apr 24 14:07:16:835 [139662897178368] Controller: -----
Apr 24 14:07:16:835 [139662897178368] Controller: Controller on uimsechub port 48000 started
Apr 24 14:07:18:865 [139662897178368] Controller: Hub localhost(192.168.5.35) contact established
Apr 24 14:10:32:785 [139662897178368] Controller: SSL requested but not enabled, closing connection from 127.0.0.1/54038
Apr 24 14:10:57:673 [139662897178368] Controller: SSL requested but not enabled, closing connection from 192.168.5.33/51430

 

and in the hub.log:

 

[root@uimsechub uim]# vi /opt/nimsoft/hub/hub.log
Apr 24 13:45:05:742 [139994171328256] hub: WARNING: license not set in config file
Apr 24 13:45:05:742 [139994171328256] hub: --------------------------------------------------------------------------------------------------------
Apr 24 13:45:05:742 [139994171328256] hub: ----- Hub 7.80 [Build 7.80.3556, Jun 16 2015] initializing -----
Apr 24 13:45:05:742 [139994171328256] hub: HUB SEC: initialize failed to read security file
Apr 24 13:45:05:742 [139994171328256] hub: HUB SEC: HMAC file not found (errno=2)
Apr 24 13:45:05:742 [139994171328256] hub: HUB SEC: failed to open security.cfg (errno=2)
Apr 24 13:45:05:742 [139994171328256] hub: HUB SEC: generate HMAC failed
Apr 24 13:45:05:742 [139994171328256] hub: HUB SEC: failed to open security.cfg (errno=2)
Apr 24 13:45:05:742 [139994171328256] hub: HUB SEC: new security file
Apr 24 13:45:05:743 [139994171328256] hub: HUB SEC: OFF
Apr 24 13:45:05:744 [139994171328256] hub: ----- HUB started -----
Apr 24 13:45:05:744 [139994171328256] hub: Name = uimsechub IP = 192.168.5.35 port = 48002
Apr 24 13:45:05:744 [139994171328256] hub: Domain = uim_mydomain_domain addr = /uim_mydomain_domain/uimsechub/uimsechub/hub
Apr 24 13:45:05:744 [139994171328256] hub: log_level= 0 , log_file=hub.log
Apr 24 13:45:05:744 [139994171328256] hub: license on * robots=10 expire=Fri Jun 2 00:00:00 2017

Apr 24 13:45:05:744 [139994171328256] hub: -----
Apr 24 13:45:05:745 [139994072160000] hub: hubi main thread started
Apr 24 13:45:05:747 [139994171328256] hub: Couldn't open the directory 'q/temp'
Apr 24 14:07:01:736 [139994171328256] hub: Got STOP command from 192.168.5.35/36771.
Apr 24 14:07:01:736 [139994171328256] hub: main: nimSessionWait rc =4
Apr 24 14:07:01:987 [139993989248768] hub: thread shutdown
Apr 24 14:07:05:740 [139994171328256] hub: EXIT HUB: hub shutdown
Apr 24 14:07:16:858 [139688428668672] hub: --------------------------------------------------------------------------------------------------------
Apr 24 14:07:16:858 [139688428668672] hub: ----- Hub 7.80 [Build 7.80.3556, Jun 16 2015] initializing -----
Apr 24 14:07:16:858 [139688428668672] hub: HUB SEC: HMAC file not found (errno=2)
Apr 24 14:07:16:858 [139688428668672] hub: HUB SEC: HMAC mismatch
Apr 24 14:07:16:859 [139688428668672] hub: HUB SEC: new security file
Apr 24 14:07:16:859 [139688428668672] hub: HUB SEC: OFF
Apr 24 14:07:16:860 [139688428668672] hub: ----- HUB started -----
Apr 24 14:07:16:860 [139688428668672] hub: Name = uimsechub IP = 192.168.5.35 port = 48002
Apr 24 14:07:16:860 [139688428668672] hub: Domain = uim_mydomain_domain addr = /uim_mydomain_domain/uimsechub/uimsechub/hub
Apr 24 14:07:16:860 [139688428668672] hub: log_level= 0 , log_file=hub.log
Apr 24 14:07:16:860 [139688428668672] hub: license on * robots=10 expire=Fri Jun 2 00:00:00 2017

Apr 24 14:07:16:860 [139688428668672] hub: -----
Apr 24 14:07:16:861 [139688329500416] hub: hubi main thread started
Apr 24 14:10:35:649 [139688428668672] hub: SSL requested but not enabled, closing connection from 127.0.0.1/43601
Apr 24 14:10:38:377 [139688319010560] hub: SSL requested but not enabled, closing connection from 127.0.0.1/58530
Apr 24 14:11:00:233 [139688319010560] hub: SSL requested but not enabled, closing connection from 192.168.5.33/52922
Apr 24 14:11:02:905 [139688428668672] hub: SSL requested but not enabled, closing connection from 192.168.5.33/51128

 

 

any tip/suggestion is appreciated!

thank you, stefan

Outcomes