Checking my UIM environment this morning I noticed I had not received any alarms for a while and found that the alarm_enrichment probe (version 4.67) was red. I deactivated it and then reactivated and it came back online and alarms started coming in. There were no events saying that the alarm_enrichment probe had failed and the only reason I was aware was because I have set up an alarm to come in every 30 minutes as a sanity check to ensure alarms are working.
Looking at the log for alarm_enrichment, there is nothing in there that suggests any errors at all, should an alarm for the failure been generated? I increased the log level in the nas probe but that only increases the logging for the nas.log not alarm_enrichment probe, how can I increase the logging for alarm_enrichment?