From: Dempsey, Declan
Sent: 30 December 2014 10:45
Subject: RE: NOVEMBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
- SNMP Engine Reboot alarm after taking a model out of Maintenance Mode in CA Spectrum
While in Maintenance Mode, if the device is rebooted, CA Spectrum may assert an SNMP Engine Reboot alarm after the device it taken out of Maintenance Mode. - CA Spectrum 9.4.1 - How Top Impacting Outages are calculated
This will provide an overview of how Spectrum calculates the top impacting outages - CA Spectrum 9.4.1 integration with CA Nimsoft now requires the NISAPI probe
Enhancements to the CA Spectrum/CA Nimsoft integration now require an updated probe on the Nimsoft side. - Moving Datacenters to different landscapes for virtual modeling with the CA Spectrum 9.4.1 integration with CA Nimsoft
The integration models CA Nimsoft hosts to a designated landscape. This allows the Datacenter to be modeled on the same landscape as its upstream devices. - VMware objects are not discovered in CA Nimsoft/CA Spectrum 9.4.1 when using the VMware integration
After enabling the VMware management solution for the CA Nimsoft/CA Spectrum 9.4.1 release, VMware objects are not discovering. - CA Spectrum 9.4.1 installation information
This document outlines installation and migration information for CA Spectrum release 9.4.1. - Rare issue in which CA Spectrum 9.4.1 does not populate CA Nimsoft models in the database after enabling the VMware management option.
After clicking on OK in the confirmation window to enable the VMware management for the CA Nimsoft integration, the synchronization does not happen. - CA Spectrum 9.4.1 truncates VMware Datacenter names from CA Nimsoft
The DataCenter names that contain a dot (.) are truncated in CA Spectrum. - CA Spectrum 9.4.1 Device Certification Updates
This is a list of the device certification updates that have been completed for CA Spectrum 9.4.1. - CA Spectrum 9.4.1 virtual modeling integration with CA Nimsoft disables all VHM functionality
When enabling the CA Spectrum/CA Nimsoft integration with the 'VMware Management' option enabled, OneClick will trigger the deletion of all VHM models across all landscapes before disabling the VHM. - CA Spectrum MIBTools hangs when launched
When launching MIB Tools utility, hangs at message: Loading 2,189 MIBs. Please wait .... - CA Spectrum Secure Domain Connector crashes
CA Spectrum Secure Domain Connector crashes - CA Spectrum VMWare Host Pingable models have an initial Model State
Spectrum VMWare Host Pingable models Model State Initial even though Spectrum is able to contact the IP Address. - CA Spectrum install fails on Windows 2012
CA Spectrum install fails on Windows 2012 with insufficient privileges error message
Technical tips / Posts to CA Spectrum Community board:
Title | Replies | Views |
Develop a queue for "Discover Connections"53Under review | 2 | 118 |
Device family attribute | 3 | 103 |
Tuesday Tip: How to enable user event logging | 7 | 1557 |
Why is NCM disabled for devices in Maintenance? | 11 | 1785 |
Process Traps during maintenance20New | 0 | 38 |
Not able to edit Attribute | 4 | 115 |
TWAMP Support | 0 | 69 |
Can eHealth or SystemEdge be used to monitor JVM memory consumption | 2 | 80 |
NCM vlan.dat files Backup from Cisco Devices2New | 0 | 22 |
Tech Tip : eHealth 6.3.1 - Percentile report for group using CA ehealth Service Level report.pdf | 3 | 181 |
Spectrum Schedule Duration | 1 | 46 |
Intergrate Cisco Prime into Spectrum1New | 0 | 59 |
Flexible Maintenance Mode Schedules38Under review | 8 | 90 |
Enable Maintenance Mode for all Modeltypes14New | 2 | 66 |
oc_components for SDM12 integration | 2 | 76 |
enable live links between switches | 26 | 352 |
Tech Tip- After upgrading to Spectrum 9.3, are your Infoview reports missing titles? | 1 | 59 |
Search by IP-Address or Model-Name inside Explorer-Tab, main_Screen44Currently Planned | 8 | 95 |
Allow Spectrum to deploy Sysedge clients2New | 0 | 59 |
Spectrum OneClick Log Out Feature5New | 1 | 27 |
| 1 | 48 |
| 0 | 12 |
| 3 | 115 |
| 0 | 30 |
| 3 | 125 |
| 12 | 201 |
| 5 | 222 |
| 5 | 173 |
| 2 | 70 |
| 2 | 168 |
| 0 | 71 |
| 0 | 93 |
| 1 | 123 |
| 0 | 113 |
| 0 | 1749 |
| 18 | 2692 |
| 5 | 135 |
| 2 | 46 |
| 0 | 26 |
Ability to predefine the outgoing/Source IP address of Spectrum9New | 0 | 85 |
VMWare DRS support5New | 0 | 55 |
Photos from CA World '14 | 0 | 90 |
Juniper Configuration in Spectrum | 3 | 129 |
Technical Tip: Can the container alarm rollup in Spectrum be changed to alarm on the entire container model instead of just the upside down triangle? | 0 | 72 |
CA Spectrum | 5 | 134 |
SRM Custom Attributes for more model types2New | 0 | 45 |
Free scripts and instructions for CA Spectrum maintenance scheduler | 2 | 107 |
SNMPv3 Discovery with Context11New | 8 | 156 |
Spectrum RESTFul | 3 | 164 |
CA Spectrum 9.3.H02 hotfix patch released and available for download | 0 | 57 |
Possibility to log out from the Spectrum OneClick Administration web page16New | 0 | 46 |
Spectrum detect different ASN connections seperately3New | 0 | 20 |
Spectrum SOI connector stuck on initializing | 3 | 102 |
OneClick alarm resync with SpectroServers4New | 2 | 80 |
Spectrum connector for SOI | 3 | 91 |
Spectrum: Landscape Display Name / Alias / Friendly Name52New | 4 | 263 |
Ability to export topology maps in Visio format38Under review | 5 | 144 |
Spectrum attribute for "Line Changes" | 3 | 115 |
Change_Spectrum_Hostname_copy_for_tool_downloads_area.pl | 0 | 33 |
Community Update November 2014 - CA World, Vision and Strategy, Tech Event | 0 | 167 |
Certification Request | 12 | 232 |
Sync Spectrum Global Collections of Interfaces to Performance Center2New | 0 | 42 |
Web view of topology74Under review | 7 | 160 |
How can we improve your customer experience? | 0 | 79 |
Shamless Plug for Idea Submissions | 0 | 46 |
Spectrum Mobile | 7 | 135 |
Popup message box in front of OneClick9New | 0 | 75 |
CA Spectrum Mobile App Instructions | 3 | 210 |
ADVA FSP3000 DWDM in Spectrum | 0 | 45 |
How can I ensure that every event occurence for a specific event generates an alert? | 1 | 56 |
Spectrum modeling and topology layout of Cisco Nexus 7000's | 1 | 109 |
Best practice getting started with CA IM2.0 | 4 | 98 |
July 2014 IM News You Can Use Customer Newsletter | 0 | 63 |
June 2014 IM News You Can Use Customer Newsletter | 1 | 87 |
August 2014 IM News You Can Use Customer Newsletter | 0 | 115 |
September 2014 IM News You Can Use Customer Newsletter | 0 | 80 |
October 2014 IM News You Can Use Customer Newsletter | 0 | 101 |
Spectrum Users: If you could have a new video demo, what would it be? | 5 | 182 |
Technical Tip: What does the Spectrum “SNMP GET_NEXT LOOP DETECTED” alarm mean? | 0 | 75 |
DMVPN Monitoring in Spectrum 9.42New | 2 | 98 |
Fibre-to-the-Cabinet (FTTC) Reporting/Alerting | 1 | 71 |
Top reasons you have thought about leaving CAPC (to go back to whatever you had) | 73 | 2428 |
SouthBound Gateway files under custom directory5New | 7 | 98 |
DMVPN monitoring in Spectrum | 13 | 907 |
CA Spectrum - Cisco Device RAM and Flash information | 3 | 73 |
Global collection for red hat servers.. | 2 | 88 |
Warning: Missing charsets in String to FontSet conversion | 0 | 54 |
Unable to discover Devices | 3 | 105 |
Interfaces Alarms on the Device. | 3 | 756 |
Archive manger Fails | 1 | 64 |
Devices stuck in "initial" state | 4 | 92 |
Enhance Spectrum alarm synchronization process between primary and secondary SpectroSERVERs21New | 1 | 75 |
Spectrum: Use a different icon for proxy models6New | 1 | 52 |
CA World 2014 Ops Center Review | 0 | 112 |
Ability to apply NCM Policy to multiple device families11New | 0 | 64 |
Stop search from hanging SpectroSERVERs5New | 0 | 58 |
Upgrading Spectrum | 3 | 103 |
OneClick CLIENT Application Error | 10 | 260 |
An idea to make Spectrum installs easier1New | 0 | 39 |
Anyone been able to successfully install cabi/boxi on linux REL6? Please share... | 11 | 218 |
Spectrum on Redhat? Which install? | 7 | 141 |
November 2014 IM News You Can Use Customer Newsletter | 0 | 60 |
CA World Spectrum Roadmap Presentation | 5 | 233 |
Opscenter Keynote from CA World available on YouTube | 0 | 39 |
Spectrum, destruction of lost models by age does not work in Windows0New | 0 | 48 |
Spectrum 9.4.1 upgrade Instructions | 5 | 218 |
Webcast - CA World Recap + IM Product Updates | 0 | 769 |
November 2014 Webcast - CA World Recap + IM Product Updates | 0 | 136 |
archive manager not running after Spectrum 9.4.1 upgrade | 8 | 190 |
STACKED Devices to show all Serial Numbers17Under review | 2 | 99 |
NTLM/Windows Authentication | 3 | 103 |
Better documentation for Linux installs1New | 0 | 47 |
Events showing down after Spectrum 9.4.1 upgrade | 6 | 135 |
NCM fails to capture configuration | 15 | 615 |
Spectrum Archive Manager stopped after 9.4.1 upgrade | 1 | 90 |
OCTOBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board | 0 | 164 |
Support for Layer 2 Netflow11New | 1 | 67 |
Allow Spectrum to change all model attributes including Model type when a model is reconfigured and changes are detected.41Under review | 6 | 224 |
IM Community Webcast: CA World Recap + IM Product Updates | 5 | 979 |
Real World example of Spectrum Service Manager | 2 | 94 |
where can I get SAPwalk | 4 | 105 |
Spectrum SLA Best Practice | 0 | 68 |
Monitor non default eventvwr14New | 0 | 48 |
Spectrum OneClick View | 10 | 245 |
Spectrum collection based on IOS verison | 4 | 150 |
wrong model type for Cisco switch | 3 | 97 |
Better idea for documentation for all this CA IM1New | 0 | 43 |
CA Spectrum filter on the list view when creating Global Collection | 4 | 111 |
Enable maintenance mode for a group of devices6New | 13 | 98 |
IM Tech Tip Rollup - November 2014 | 0 | 173 |
IM Tech Tip Rollup - October 2014 | 0 | 81 |
stop repeated alarms for the same device | 2 | 72 |
IM Community Webcast (June 16, 2015) | 0 | 75 |
IM Community Webcast (May 19, 2015) | 0 | 35 |
IM Community Webcast (Apr 21, 2015) | 0 | 36 |
IM Community Webcast (March 17, 2015) | 0 | 34 |
IM Community Webcast (Feb 17, 2015) | 0 | 48 |
VSAT monitoring through Spectrum | 0 | 39 |
From: Dempsey, Declan
Sent: 17 November 2014 14:49
Subject: RE: OCTOBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
- TEC618269
- TEC618458
- TEC618463
- TEC618697
- TEC618849
- TEC618862
- TEC618788
- TEC618786
- TEC619044
Technical tips / Posts to CA Spectrum Community board:
From: Dempsey, Declan
Sent: 13 October 2014 13:24
Subject: SEPTEMBER Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
- TEC616348
- TEC616352
- TEC616369
- TEC605395
- TEC616447
- TEC616446
- TEC616803
- TEC617896
- TEC617895
- TEC617894
- TEC617903
- TEC617956
- TEC617961
- TEC617967
- TEC617966
Technical tips / Posts to CA Spectrum Community board:
From: Dempsey, Declan
Sent: 15 September 2014 13:24
Subject: RE: AUGUST Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
- The document [ Conceptual information regarding the Discard Rate value in the interface performance view in CA Spectrum OneClick ] has been published as TEC615511
- The document [ Global Collections are missing after upgrading to Hotfix H01 for CA Spectrum 9.3 (Spectrum 09.03.00.H01) ] has been published as TEC615509
- The document [ Error when processing OSPF-5-ADJCHG syslog in Spectrum - "Does not match the format defined in the Parse Map file OSPF-5-ADJCHG" ] has been published as TEC615510
- The document [ Information on how to obtain the CA Spectrum 9.4 download from the CA Support website ] has been published as TEC615579
- The document [ Cleared alarms are still showing in Spectrum OneClick ] has been published as TEC615640
- The document [ Ad-hoc Report fails with: Cannot initialize Report Engine server. (Error: RWI 00226) (Error: INF) ] has been published as TEC615641
- The document [ Customized CA Spectrum OneClick Menu does not execute actions after installing CA Spectrum 9.4 ] has been published as TEC615642
- The document [ Information on CA Spectrum 64bit Java (JRE) Client Support for OneClick clients ] has been published as TEC615643
- The document [ The CA Spectrum SpectroSERVER (SS) may crash with "Out of Memory" error when running RESTFul query with a large input stream ] has been published as TEC615644
- The document [ Spectrum Performance Manager (SPM) HTTPS Tests Can Not Be Created ] has been published as TEC615645
- The document [ How to prevent CA Spectrum OneClick from seeing specific alarm types ] has been published as TEC615750
- The document [ Black Pipes in Global Collections between device model and container model in CA Spectrum OneClick ] has been published as TEC615755
- The document [ How to pass hostname to alarm title for a BGP trap ] has been published as TEC616180
- The document [ Error messages “No Associated Text” and "….no event format file exists.” seen in the NOTIFIER.OUT ] has been published as TEC616182
- The document [ Limit VHM modeling within CA Spectrum to particular virtual machines and ESX hosts. ] has been published as TEC615754
Technical tips / Posts to CA Spectrum Community board:
From: Dempsey, Declan
Sent: 15 September 2014 12:51
Subject: RE: JULY Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
Newly published Tecdocs:
- The document [ Updating CA Spectrum models to utilize the Spectrum 9.4 device certification updates. ] has been published as TEC614051
- The document [ CA Spectrum 9.4 OneClick clients require JRE 1.7.0_60 as well as the installation of JCEUnlimited Strength files ] has been published as TEC614052
- The document [ List of third party upgrades in CA Spectrum 9.4 ] has been published as TEC614053
- The document [ CA Spectrum's Internal_If_Alias attribute does not match the devices actual ifAlias entry for ports ] has been published as TEC614054
- The document [ Communication attributes differ from parent alarms in CA SPECTRUM when setting the model type default flag ] has been published as TEC614055
- The document [ CA Spectrum model reconfigurations are not automatically running when iftable changes happen ] has been published as TEC614056
- The document [ Device rebooted events are not occurring after the device has been rebooted in CA Spectrum ] has been published as TEC614057
- The document [ CA Spectrum 9.4 supports Cisco IOS-XE for Network Confirmation Manager (NCM) ] has been published as TEC614058
- The document [ Does the RSA BSAFE DUAL_EC_DRBG vulnerability affect CA Spectrum or its components? ] has been published as TEC614149
- The document [ Setting up a working user security concept for Report Manager user accounts ] has been published as TEC614150
- The document [ CA Spectrum 9.4 and CA Nimsoft 7.6 integration fails to authenticate due to lack of nisrest probe ] has been published as TEC614248
- The document [ Java Authentication Dialog When Launching the OneClick Console ] has been published as TEC613428
- The document [ Setting up a working user security concept for Report Manager user accounts ] has been published as TEC614150
- The document [ Cabi 3.3 upgrade doesn't reveal the labels in the output report ] has been published as TEC614237
- The document [ Is Spectrum 9.2 supported on Linux Redhat 6 ] has been published as TEC614234
- The document [ How to map an alarm on a process model to its parent model ] has been published as TEC614232
- The document [ How to pass new attribute to Service Desk ticket from Spectrum Alarms ] has been published as TEC614357
- The document [ Sybase ASA Client Connection Broadcast Remote Information Disclosure vulnerability with Cabi 3.3 ] has been published as TEC614356
- The document [ EEM 12.5 compatibility with Spectrum 9.x ] has been published as TEC614355
- The document [ Service models show incorrect status in Service Dashboard ] has been published as TEC614389
- The document [ How to turn on MySQL General Query Logging without restarting the MySQL Server ] has been published as TEC614598
- The document [ Is it possible to use the attribute WA_Link when creating custom SRM Ad Hoc Reports ] has been published as TEC614599
- The document [ CA Spectrum 9.4 Device Certification list ] has been published as TEC614602
- The document [ Spectrum SOI Connector 2.0.0.186 Released ] has been published as TEC614851
Technical tips / Posts to CA Spectrum Community board:
Title | Replies | Views |
---|
CA Spectrum Alarm Filter Enhancement – to nest filter options15New | 0 | 26 |
---|
Combine VMware ESX Host model with SNMP Model16New | 1 | 17 |
---|
Wrong Connections Through Needless Interfaces18New | 2 | 23 |
---|
VLAN Bandwidth Utilization % issue in ehealth. | 4 | 115 |
---|
Spectrum Trap, mapping of varbind number value to pre-determined text value | 2 | 71 |
---|
Free CA Spectrum Training, July 22 & Aug 12 | 0 | 109 |
---|
Central Console-Managing System Edge | 6 | 76 |
---|
Best practices to model device with multiple "critical" IPs | 7 | 115 |
---|
CA Spectrum - Oneclick - Log memory utilization0New | 1 | 19 |
---|
NCM script for HP switches | 5 | 616 |
---|
CA Spectrum SNMP Profile Management10New | 1 | 87 |
---|
CPU utilization monitoring6New | 0 | 73 |
---|
Differntiate physical and virtual links within Topology Map49Under review | 0 | 25 |
---|
Watches and thresholds -Spectrum | 3 | 70 |
---|
CA Spectrum - Distributed alarm filter2New | 1 | 41 |
---|
Free Training: Quick & Easy Fault Isolation in CA Spectrum | 0 | 140 |
---|
Free Training: Building Customized Role Privileges with CA Spectrum | 0 | 170 |
---|
Tuesday Tip: Adding firmware version column to locater search results list | 6 | 1123 |
---|
Cisco WLC management | 1 | 30 |
---|
Android based Tab for Spectrum console9Currently Planned | 3 | 32 |
---|
SPECTRUM 9.4 and SystemEDGE | 2 | 87 |
---|
Mobile OneClick66Currently Planned | 9 | 95 |
---|
Configuration | 2 | 70 |
---|
Device Certification of Cisco 5500 WLC6New | 1 | 36 |
---|
More User_Asset attributes21New | 3 | 81 |
---|
Including additional info in Event Message | 4 | 572 |
---|
Tech Tip - Is Spectrum 9.2 supported on Linux Redhat 6 | 0 | 16 |
---|
Deleted Device appear on Asset Report | 4 | 97 |
---|
Is anyone using Embedded Entitlements Manager with Spectrum and eHealth ? What versions if so ? | 4 | 79 |
---|
July 2014 Webcast Transcript | 0 | 54 |
---|
IM Community Update Power Point Slide Deck | 0 | 74 |
---|
July 2014 Webcast - IM Product Group Vision and Strategy Review | 6 | 127 |
---|
Script to Automatically run Spectrum Integrated Discovery Profiles | 0 | 49 |
---|
New CA Spectrum 9.4 option to rediscover connections during a scheduled discovery | 0 | 63 |
---|
Spectrum REST API - output in json | 4 | 205 |
---|
Modellinggateway via Webservice33Under review | 8 | 39 |
---|
Maintenance mode privileges in roles in Spectrum | 2 | 37 |
---|
Config Capture of Cisco Wireless Controllers -NCM9New | 0 | 24 |
---|
July Webcast - Spectrum 9.4 Key Features & Demo followed by Roadmap | 0 | 76 |
---|
Quality testing service packs and hotfixes11Delivered | 8 | 48 |
---|
RFC 2790 FileSystem Bytes Free23Not planned | 1 | 19 |
---|
Make Alarm history visible in Spectrum GUI122Delivered | 10 | 116 |
---|
Make it possible to remove a loaded MIB file from Spectrum MIB tools88Delivered | 6 | 44 |
---|
Add a 'Last Occurred' timestamp to an alarm66Delivered | 7 | 29 |
---|
Cisco ASA 55xx Series Support6Delivered | 1 | 44 |
---|
Spectrum Bookshelf | 11 | 144 |
---|
Spectrum REST-API - filter alarms by OneClick user/group alarm filter4New | 1 | 18 |
---|
Spectrum Rulesets to Modify Sysedge Monitors11Not planned | 3 | 21 |
---|
a possibility to (Re)discover physical connection changes reliably for already modeled devices and topologies17Delivered | 3 | 23 |
---|
Drag and Drop Feature21Not planned | 1 | 22 |
---|
Enhanced Certification for Cisco Cat385048P6Delivered | 1 | 19 |
---|
Support of "FabricPath and vPC+" by CA Spectrum5Currently Planned | 2 | 14 |
---|
mysql 64bit2Currently Planned | 1 | 51 |
---|
Microsoft Internet Explorer 11 Support24Currently Planned | 4 | 98 |
---|
Support the use of Java 78Delivered | 2 | 44 |
---|
OneClick enabled for Ipad/Tablet devices16Currently Planned | 2 | 20 |
---|
Develop a queue for "Discover Connections"46Under review | 2 | 65 |
---|
Tuesday Tip: How to configure Backup Location server on OneClick server | 2 | 897 |
---|
Unregistering an NPC/CAPC data source | 0 | 41 |
---|
Spectrum Privileges | 0 | 51 |
---|
Technical Tip: Need to store value of additional attribute instance from threshold SpectroWatch attribute instance | 0 | 21 |
---|
SysEdge Alert - MICROSOFT HYPER-V MANAGER PROXY UNAVAILABLE | 0 | 12 |
---|
Calling all Tweeters | 0 | 26 |
---|
Customizing OneClick Topology Views | 2 | 38 |
---|
Sending event message of clear event via mail | 0 | 14 |
---|
Flexible Maintenance Mode Schedules33New | 5 | 40 |
---|
Additional Enterasys Device Support Required10New | 4 | 23 |
---|
IM2.0 alert messages do not have any alarm details. Please add the port name, port description, current rate, threshold setting like netvoyant had.29New | 2 | 16 |
---|
Problem with Capture Host Configurations0New | 0 | 20 |
---|
Configure Oneclick cookies to use 'Secure' flag6New | 6 | 45 |
---|
Spectrum 9.3 on Redhat error | 2 | 33 |
---|
how to add dynamic members in global collection via CLI | 2 | 31 |
---|
SPM tests - Condition Correlation Editor | 5 | 100 |
---|
Spectrum 9.4 Key Features & Demo followed by Roadmap Webcast Transcript | 0 | 81 |
---|
Allow Spectrum to change all model attributes including Model type when a model is reconfigured and changes are detected.23Under review | 2 | 37 |
---|
Background Images in OneClick Topology Tab | 10 | 65 |
---|
CA User Communities24New | 0 | 25 |
---|
Secondary SS Status @ Connection Status - Console29New | 1 | 78 |
---|
capture start-upconfig from Cisco devices to Spectrum | 22 | 151 |
---|
Spectrum Host Monitors. CA Please Add more features and enhancements20Not planned | 14 | 174 |
---|
Spectrum X64 app36Currently Planned | 15 | 173 |
---|
Ability to export topology maps in Visio format32Under review | 5 | 86 |
---|
First Step | 0 | 28 |
---|
Spectrum - eHealth gateway should support delete and SNMPV39New | 5 | 114 |
---|
How this community helped launch Spectrum 9.4 | 0 | 45 |
---|
Alarm occurrences available in SRM reports3New | 1 | 24 |
---|
Privilege/Permission Design in Spectrum9New | 0 | 33 |
---|
INFOVIEW Editing Sceduled Reports13New | 0 | 16 |
---|
Possibility to set dynamic alarm titles by the Event Configurator GUI19Not planned | 8 | 62 |
---|
Enhanced Device Certification for Cisco Nexus 70048Under review | 1 | 26 |
---|
F5 BigIP 6900 certification for firmware 11.2.07Under review | 1 | 18 |
---|
Route Explorer version 10.1.3-R compatible with existing Spectrum version.1New | 4 | 32 |
---|
VMware Host maintenance mode37Under review | 11 | 35 |
---|
Process Traps during maintenance18New | 0 | 17 |
---|
- catalina.out Backup File8New
| 0 | 20 |
---|
OneClick - Performance - Recording34Under review | 1 | 67 |
---|
Report on model deletion | 5 | 942 |
---|
SPM HTTP test modification2New | 0 | 31 |
---|
From: Dempsey, Declan
Sent: 21 July 2014 13:17
Subject: RE: JUNE Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
Newly published Tecdocs:
- TEC612055
- TEC612051
- TEC612057
- TEC612059
- TEC612058
- TEC612426
- TEC612703
- TEC612984
- TEC612991
- TEC612561
- TEC613303
Technical tips / Posts to CA Spectrum Community board:
Title | Replies | Views |
---|
poller and memory limt7New | 0 | 13 |
---|
Alarm Notifier-Terminates | 2 | 46 |
---|
Can you monitor a processes memory usage in Spectrum ? (pt 2) | 4 | 84 |
---|
Missing Devices-No notifications | 6 | 51 |
---|
No Events in Spectrum from NPC | 0 | 17 |
---|
Spectrum History | 6 | 50 |
---|
Export device list | 0 | 17 |
---|
SPM HTTP test modification1New | 0 | 20 |
---|
Cisco WLC management | 0 | 17 |
---|
CA Spectrum Customers participate in TechValidate Research | 0 | 22 |
---|
issues with AlarmNotifier | 4 | 61 |
---|
Spectrum OneClick Client performance patch for 9.3 H01 | 0 | 45 |
---|
Stop Alarm notifier | 4 | 46 |
---|
Different Time Zones1New | 0 | 5 |
---|
Revoke the device from maintenance mode automatically once planned maintenance is over6New | 0 | 16 |
---|
Option to remodel / re-interrogate models? | 3 | 33 |
---|
create multiple alarms in Spectrum | 1 | 35 |
---|
Technical Tip: How to pick up MAC address changes in Spectrum. | 4 | 222 |
---|
IM2.0 Netqos Weathermap9New | 0 | 28 |
---|
IM Community WIKI Front Page | 0 | 139 |
---|
Looking for the IM Community WIKI? | 0 | 77 |
---|
Cisco ASA 55xx Series Support6New | 0 | 27 |
---|
WAN link terminated as Ethernet interface not showing Link status is Spectrum & ehealth9New | 0 | 13 |
---|
Full IOS details to be included on the contents pane in Spectrum as a column0New | 0 | 46 |
---|
Command line to change the Bandwidth of list of interfaces in ehealth version 6.3.1 | 3 | 36 |
---|
Using Host_Device for SBGW | 3 | 48 |
---|
How Pass any SPECTRUM's Attribute thought Alarm Notifier?? | 3 | 1897 |
---|
Resolving Statistic Poller Error Messages | 0 | 21 |
---|
Trying to get server sensor data in eHealth. All I get is "status", which is always "up". | 2 | 18 |
---|
FAILURE TO BIND TO A TRAP PORT | 2 | 31 |
---|
Installed Software-Monitor | 0 | 13 |
---|
IDC interviewed five of our Infrastructure Monitoring customers - Read the report | 0 | 14 |
---|
Enable Maintenance Mode for all Modeltypes10New | 0 | 25 |
---|
perl script | 4 | 1240 |
---|
Ideas management enhancement28New | 0 | 74 |
---|
Service performance test | 1 | 16 |
---|
Spectrum maintenance | 0 | 28 |
---|
Seth Godin - The tribes we lead | 0 | 26 |
---|
Disablin Virtual Interfaces | 1 | 39 |
---|
Certify Cisco BGP traps7New | 2 | 16 |
---|
Multicast Manager support for RFC 51324New | 0 | 20 |
---|
Spectrum Host Monitors. CA Please Add more features and enhancements20New | 1 | 34 |
---|
Icmp error in VNM.OUT | 1 | 1130 |
---|
CA eHealth - Backup and Recovery | 0 | 50 |
---|
Command line to change the Bandwidth of list of interfaces in ehealth version 6.3.1 | 3 | 36 |
---|
Using Host_Device for SBGW | 3 | 48 |
---|
How Pass any SPECTRUM's Attribute thought Alarm Notifier?? | 3 | 1897 |
---|
Resolving Statistic Poller Error Messages | 0 | 21 |
---|
Trying to get server sensor data in eHealth. All I get is "status", which is always "up". | 2 | 18 |
---|
FAILURE TO BIND TO A TRAP PORT | 2 | 31 |
---|
Installed Software-Monitor | 0 | 13 |
---|
IDC interviewed five of our Infrastructure Monitoring customers - Read the report | 0 | 14 |
---|
Enable Maintenance Mode for all Modeltypes10New | 0 | 25 |
---|
perl script | 4 | 1240 |
---|
Ideas management enhancement28New | 0 | 74 |
---|
Service performance test | 1 | 16 |
---|
Spectrum maintenance | 0 | 28 |
---|
Seth Godin - The tribes we lead | 0 | 26 |
---|
Disablin Virtual Interfaces | 1 | 39 |
---|
Certify Cisco BGP traps7New | 2 | 16 |
---|
Multicast Manager support for RFC 51324New | 0 | 20 |
---|
Spectrum Host Monitors. CA Please Add more features and enhancements20New | 1 | 34 |
---|
Icmp error in VNM.OUT | 1 | 1130 |
---|
CA eHealth - Backup and Recovery | 0 | 50 |
---|
Spectrum integration with LDAP5New | | 21 |
---|
Stop Alarms Being Cleared if a Trouble Ticket is present | 4 | 63 |
---|
Query an OID before generating an Event | 2 | 45 |
---|
AlarmNotifier acts bizarrely while processing alarms, generated through custom event | 0 | 30 |
---|
Spectrum Bookshelf | 0 | 34 |
---|
Alarm Notifier Not Using New Event Format File | 5 | 539 |
---|
Spectrum-ehealth integration in 9.3 H01 - Alarm Detail Report missing link | 2 | 115 |
---|
Reloading Filters Without Restarting OneClick | 7 | 76 |
---|
display ehealth poller name in Livehealth alarm in Spectrum8New | 0 | 18 |
---|
HOW TO AUTOMATE THE UPDATING OF THE NCM LOCAL COMMUNICATION CONFIGURATIONS | 0 | 81 |
---|
On behalf of 21571436-1 - P2 - SINGAPORE HEALTH SERVICES PTE LTD - Stack Switch complete support in Spectrum8New | 3 | 7 |
---|
Add Acknowledge User and Acknowledge Datetime column to Alarm Details8New | 1 | 8 |
---|
Support the use of Java 78New | 0 | 33 |
---|
- NOTIFIER. OUT size limit8New
| 0 | 13 |
---|
NCM Certify New Devices8Currently Planned | 3 | 12 |
---|
Edit Maintenance Schedule in Spectrum7New | 1 | 13 |
---|
SRM should not sync asset attributes by event, but independently/automatically7New | 0 | 11 |
---|
Enhanced Device Certification for Cisco Nexus 70047New | 0 | 7 |
---|
Don't delete nsTunnelIF models with same ip address pair7New | 0 | 8 |
---|
Update Certification Web Database Search with Spectrum/eHealth version, FW Level and Model # of Device7New | 0 | 16 |
---|
Increase Capacity of Event reporting7New | 0 | 6 |
---|
Sorted response in Spectrum RestFul Webservice7New | 0 | 5 |
---|
Support for Layer 2 Netflow7New | 1 | 6 |
---|
- catalina.out Backup File7New
| 0 | 10 |
---|
To have an Alarm History that keeps and show historical alarm details instead of historical event data7New | 0 | 6 |
---|
Online Chat Support7New | 0 | 16 |
---|
Relative time filtering of alarms7New | 0 | 6 |
---|
Managing users' filters7New | 0 | 3 |
---|
Spectrum Trap Mapping in a DSS Env using AlarmNotifier7New | 0 | 5 |
---|
Filter/log traps before event processing7New | 1 | 6 |
---|
Configurable date/time Format in OneClick7New | 0 | 10 |
---|
ADA r9.2 integration with Spectrum7New | 0 | 18 |
---|
F5 BigIP 6900 certification for firmware 11.2.06New | 0 | 5 |
---|
Filtr mechanism for Spectrum DataSource6New | 1 | 4 |
---|
Make it possible to discover IP NAT IPranges in Spectrum6New | 1 | 5 |
---|
Enhanced Certification for Cisco Cat385048P6New | 0 | 8 |
---|
Aliasing6New | 0 | 8 |
---|
Request for CISCO PIX Firewall Security Module Certification6New | 1 | 9 |
---|
Application Performance Dasboard Map On NPC6New | 0 | 6 |
---|
Device Certification6New | 1 | 7 |
---|
Update Needed to Spectrum Sizer Utility.6New | 0 | 7 |
---|
There's no mail authentication function in Spectrum6New | 0 | 7 |
---|
Report Manager Performance Improvement5New | 0 | 9 |
---|
Remove model type from catalog5New | 0 | 4 |
---|
Spectrum VPN list manager do not inherit security strings configured5New | 0 | 3 |
---|
NCM Support for CISCO ASA/PIX fire walls out of the box5New | 0 | 6 |
---|
Spectrum SCOM Connector in HA environment5New | 0 | 4 |
---|
Context sensitive right click integration between Spectrum and CAPC5New | 0 | 6 |
---|
Juniper VLAN ID's in Spectrum OneClick5New | 0 | 5 |
---|
Support of "FabricPath and vPC+" by CA Spectrum5New | 1 | 5 |
---|
Fortinet Firewalls certification for Spectrum5Delivered | 1 | 8 |
---|
Export trap support files without mapping a trap5New | 1 | 3 |
---|
see also normal alarms in the navigation window.5New | 0 | 4 |
---|
NO CHASSIS ALARM 4 JUNIPER DEVICES5New | 0 | 4 |
---|
Spectrum SCOM Connector in DSS Environment5New | 0 | 5 |
---|
Logs of changes in the Event Configuration5New | 1 | 5 |
---|
Filter in Interface-Tab-View in OneClick5New | 0 | 4 |
---|
Load SSPerformance data into NPC5New | 4 | 4 |
---|
OneClick Location Menu pick option5New | 0 | 5 |
---|
VMWare Heart Beat support5New | 0 | 11 |
---|
Delete connections by right click menu in the interface table5New | 0 | 5 |
---|
Rolling Maintenance for CA SPECTRUM4New | 0 | 8 |
---|
Enabling and disabling of particular monitored parameter automatically based on date and time4New | 0 | 6 |
---|
Map Service Alarms Incidents as parent tickets to child Alarms/tickets4New | 0 | 3 |
---|
Correct title for System Up Time field in Spectrum OneClick4New | 1 | 7 |
---|
Show Alarms CLI to show Alarm Title4New | 0 | 6 |
---|
Extreme X460 Support required4New | 1 | 5 |
---|
Easy button to publish closed tickets to knowledge base4New | 0 | 5 |
---|
Spectroserver - split debug data from VNM.OUT or add VNM.OUT log rotation4New | 0 | 6 |
---|
Map Alarm Severity to Incident Severity in CA Service Desk4New | 0 | 4 |
---|
From: Dempsey, Declan
Sent: 19 June 2014 12:17
Subject: RE: MAY Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
Newly published Tecdocs:
- TEC611348
- TEC610739
- TEC610966
- TEC610965
- TEC611231
- TEC611232
- TEC611233
- TEC611234
- TEC611236
- TEC611348
- TEC611298
- TEC611400
- TEC611572
Technical tips / Posts to CA Spectrum Community board:
With the move to the new system the dates have been reset to 14th Jun so not able to compile this month.
From: Dempsey, Declan
Sent: 19 May 2014 13:25
Subject: RE: April Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
Newly published Tecdocs:
- TEC608492
- TEC609392
- TEC609397
- TEC610110
- TEC609810
- TEC609811
Technical tips / Posts to CA Spectrum Community board:
https://communities.ca.com/web/ca-ehealth-and-ca-spectrum-global-user-community/message-board/-/message_boards/category/2239493?&#p_19
Title | Posts | Views |
Integrated Service Now with Spectrum | 7 | 89 |
can servicedesk integration be used for other ticketing | 8 | 788 |
Alarm on Watch Status | 9 | 155 |
Spectrum REST API - Getting Alarm List Filtered by Security String | 2 | 34 |
Spectrum REST API - output in json | 3 | 50 |
"Auditing" MIBs in CA Spectrum 9.3 | 2 | 39 |
Spectrum 9.2 installation on Windows 2008 R2 server | 2 | 21 |
March Published Tecdocs / Technical tips / Posts to CA Spectrum Community | 1 | 28 |
TrapExpolder | 1 | 26 |
script to update spectrum alarm fields | 4 | 78 |
CA Spectrum 9.3 and BOXI 3.3. reports problem | 2 | 55 |
where i can be downloaded spectrum 9.3.0 version | 4 | 54 |
Parse a Single Varbind into Multiple Event Variables | 1 | 25 |
SRM Reports on Physical Entities | 1 | 22 |
Different Alarm Scripts in Spectrum | 6 | 79 |
Trouble Ticket -Not Reflecting | 5 | 40 |
Spectrum RESTful WS - Get Alarms by wildcard or substring search | 3 | 50 |
Event Procedures examples of basic calculations | 1 | 25 |
Link Down Alarm on Port Connecting to Device on Maintenance Mode | 2 | 43 |
Folder level monitoring | 6 | 98 |
Spectrum-ehealth integration in 9.3 H01 - Alarm Detail Report missing link | 2 | 46 |
Alerting parameters-Spectrum | 1 | 19 |
how to stop all vnmsh connections from CLI | 5 | 43 |
Huawei Spectrum HIGH CPU UTLILIZATION | 3 | 25 |
ca spectrum upgradation | 3 | 35 |
Systemedge SNMP V3 discovery in Spectrum | 7 | 54 |
Enabling Alerts | 12 | 143 |
Need info from event log text | 3 | 20 |
Change RESTFUL output XML to JSON | 2 | 262 |
export favorites? | 2 | 199 |
DMVPN monitoring in Spectrum | 8 | 627 |
Error message creating Global Collection | 6 | 140 |
NCM email alert | 2 | 43 |
Error while opening report Manager after upgrading the CA Spectrum | 4 | 43 |
CA Business Intelligence r3.3 -Question about Updates, TechDocs etc. | 1 | 44 |
Patch Monitor | 3 | 33 |
NCM script for HP switches | 4 | 503 |
Spectrum-Empty SANM | 4 | 61 |
CA Spectrum - start shell script over Spectrum | 2 | 26 |
Spectrum DB does not start | 2 | 25 |
Alarm console problem | 2 | 41 |
How to run system commands at event | 2 | 44 |
Deleted Device appear on Asset Report | 3 | 27 |
Upgradation of Spectrum from 9.2.2 H11 to 9.3 latest | 6 | 135 |
Spectrum: tracking device name changes | 1 | 29 |
Spectrum H09 Downgrade | 2 | 49 |
Remaining the troubleshooters | 3 | 45 |
copy event value to one column in connect panel | 5 | 48 |
BSI integration with YCS software | 2 | 47 |
Spectrum REST API - Getting a Device List | 6 | 75 |
Merge two DSS into one | 3 | 31 |
Event Severity not displaying v9.3 | 2 | 36 |
Spectrum 9.4 Early Validation Begins in 2 weeks | 9 | 329 |
Exchange monitoring issues | 1 | 18 |
Cluster monitoring false alerts | 1 | 22 |
Catalina errors in spectrum | 9 | 1457 |
SNMP get next loop detected | 1 | 19 |
SSO with Spectrum and InfoView | 2 | 27 |
Which BOXI Install DVD | 2 | 20 |
Spectrum - NetQos RA (9.01) MIB error | 9 | 1257 |
VmWare and Spectrum | 1 | 22 |
dispaly id( who has Acknowledged that alarm ) | 2 | 22 |
Dynamic Alarm Title and Alarm Notifier | 3 | 100 |
Updating CA Spectrum r9.2 H09 License Key | 3 | 44 |
AD Authentication to Spectrum | 2 | 49 |
Set ICMP test with DHCP | 2 | 65 |
Spectrum able to Ignore High memory utilisation? | 6 | 1860 |
Spectrum Export Help | 7 | 107 |
Cisco HSRP | 2 | 31 |
CA Spectrum and device interfaces | 6 | 140 |
Spectrum integration with LDAP | 3 | 44 |
TR-069 Support or Capabilities | 1 | 22 |
CA Spectrum r9.2.x End of Service Announcement | 1 | 97 |
Create connections using restful API | 3 | 82 |
NCM - passing TFTP address in an SSH script | 4 | 132 |
Spectrum-Email Notification | 5 | 134 |
From: Dempsey, Declan
Sent: 29 April 2014 13:33
Subject: RE: March Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
Newly published Tecdocs:
- Adding columns to OneClick list view ] has been published as TEC607265
- Troubleshooter Email template will not display values for attributes in email ] has been published as TEC607472
- When attempting to create a report using the Web Intelligence Document and then Spectrum Ad Hoc MySQL EN universe an error: WIJ20002 is received has been published as TEC607486
- When using CA Spectrum with CA VCAIM, after a server is discovered with SNMP, the model is moved automatically and prevents movement to another container has been published as TEC607473
- A discovery run of Enterasys devices could result in a SpectroSERVER crash with an error message of out of memory. ] has been published as TEC607552
- Service Dashboard topology will have the items listed in reverse order ] has been published as TEC607553
- Tomcat Local Host Access Log does not contain hostname or IP address. ] has been published as TEC607901
- Troubleshooter Email template will not display values for attributes in email ] has been published as TEC607472
- How to enable debug for Spectrum's telnet daemon (telnetd) ] has been published as TEC608102
- OneClick server.xml file contains the clear text password for the keystore ] has been published as TEC608101
Technical tips / Posts to CA Spectrum Community board:
https://communities.ca.com/web/ca-ehealth-and-ca-spectrum-global-user-community/message-board/-/message_boards/category/2239493?&#p_19
Title | Posts | Views |
MLS failover not working & affects one-click login. | 3 | 47 |
making Trouble tickets as hyperlink in Spectrum Console. | 8 | 260 |
Pingable Devices on Landscape | 3 | 30 |
Fanout behavior | 3 | 57 |
Command line or silent uninstall of Spectrum | 5 | 56 |
Model_Type or Model with the attribute Alarm_Status (0x11f4f) | 3 | 45 |
February Published Tecdocs / Tech tips / Posts to CA Spectrum Community | 1 | 98 |
Configure elements (Spectrum) | 7 | 121 |
SDC in mixed 9.2.1 and 9.3 environment | 3 | 179 |
Custom Branding in Spectrum 9.3.HO1 | 6 | 135 |
Automating WATCH & File System monitor creation... | 2 | 34 |
Spectrum - Memory Threshold | 8 | 106 |
Spectrum and GIS (Google Map) integration | 19 | 2655 |
RE: Session time-out(one click console) | 1 | 37 |
monitoring Feautres | 1 | 35 |
Missing VNM Model on Spectrum | 6 | 751 |
Alarm Notifier Not Using New Event Format File | 5 | 378 |
Hibernate discovery? | 2 | 43 |
High memory utilization alarm on linux based devices | 14 | 333 |
SNMPv3 context for Brocade virtual fabrics | 6 | 613 |
Nexus 7000 VDC monitoring | 2 | 66 |
Spectrum Sooutbound Gateway | 1 | 40 |
SPECTRUM - EmailNotification | 1 | 41 |
Company Logo in CA Spectrum One click | 7 | 433 |
Virtual Firewall Monitoring | 2 | 50 |
Upgrade Spectrum | 4 | 74 |
Spectrum 9.4 - Release Date. | 1 | 86 |
Spectrum - Htofix Patch11 | 2 | 35 |
SPECTRUM-UI Servers | 2 | 38 |
Fanouts | 2 | 56 |
MPLS Transport Manager | 5 | 450 |
Modeling with GnSNMPMibDetPt | 3 | 64 |
Chassis vs Device contact status | 2 | 58 |
InfoView_User Defined Attributes VALUE | 2 | 54 |
Add Device Connected Column to Global Collection List View | 3 | 281 |
Export associations using Modeling Gateway | 1 | 29 |
Generating alert since trap for two devices with same IP and different name | 2 | 44 |
LDAP or EEM with Spectrum | 3 | 41 |
How to monitoring Oracle BEA WebLogic with CA Spectrum | 1 | 19 |
NCM fails to capture configuration | 1 | 56 |
Spectrum FT | 3 | 33 |
TraceRoute menu in Oneclick | 6 | 116 |
Stack Switches Inventory Information | 3 | 55 |
Pathtrace | 1 | 21 |
snmp v3 AES 256 bits supported? | 1 | 16 |
Message "Event watch registration failed for domain" in catalina.out | 2 | 210 |
Backup and Restore of Spectrum Business Objects on Linux | 1 | 24 |
Sysedge directory monitoring | 11 | 2641 |
SPECTRUM - EMail Notification Alerts | 3 | 125 |
Pipe visibility in topology view | 1 | 18 |
Spectrum 9.3 support for Redhat 6.4 | 3 | 51 |
Create Custom Event Rule | 5 | 1490 |
Reports via Spectrum | 7 | 426 |
End of Life / End of Support | 2 | 101 |
hide particular device in all alerts filter | 2 | 134 |
CABI Spectrum Reports | 1 | 101 |
Spectrum email Notification script | 6 | 1872 |
Pdf of the schema database of Spectrum? | 2 | 245 |
From: Dempsey, Declan
Sent: 28 March 2014 11:10
Subject: RE: February Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
Newly published Tecdocs:
- CABI installation fail with Unable to find installed locale ] has been published as TEC606160
- How to check the total number of traps that have been received by a device since the last SpectroSERVER restart ] has been published as TEC606162
- Preventing IP Redundancy Preferred Addresses from being deleted from the RPA table ] has been published as TEC606865
- How are MAC addresses displayed in Spectrum OneClick ] has been published as TEC605841
- Spectrum Hotfix patch H01 for 9.3 - fixes and enhancements ] has been published as TEC605903
- JSPs and Servlets vulnerability in Cabi 3.3 ] has been published as TEC605960
- Event 0X3b10010 not defined properly ] has been published as TEC605966
- Requirements for using Spectrum VPN Manager in a Distributed Environment ] has been published as TEC605967
- Null pointer exception on Service Desk integration configuration page with Spectrum 9.3 (non-English versions) and EEM. ] has been published as TEC606230
- Events from the Nimsoft integration are not mapping to the expected models in Spectrum. ] has been published as TEC606259
- OneClick Client will not launch after updating Java to JRE 1.7 update 51 ] has been published as TEC606260
- How to make Date type dimension filtering by time in Query Filter of WEBI report ] has been published as TEC606261
- Spectrum 9.3 H01 install fails with "Unsupported upgrade path" error ] has been published as TEC606862
Technical tips / Posts to CA Spectrum Community board:
https://communities.ca.com/web/ca-ehealth-and-ca-spectrum-global-user-community/message-board/-/message_boards/category/2239493?&#p_19
Title | Posts | Views |
Configure alarm from events originated from different devices | 6 | 272 |
Sysedge for linux 32 bit | 1 | 54 |
RE: Alarms not Clearing | 3 | 190 |
Cisco VPN specific Alerts | 2 | 34 |
How to Forward all events from Spectrum | 7 | 132 |
Configuration Manager Script for Riverbed | 5 | 471 |
Problem Changing the IP Address of a router-model | 8 | 325 |
Show devices connect to switch | 2 | 152 |
Handling 2 devices with multiple duplicate IP's | 5 | 209 |
OneClick Menu Customization | 1 | 95 |
Spectrum VPLS Manager | 10 | 1041 |
Are OptiSwitch- NBase switch communicationRT devices supported. | 2 | 63 |
SILENT DISTRIBUTED INSTALL FAILS | 6 | 109 |
vCenter 5.5 monitoring | 3 | 360 |
Spectrum LDAP Integration User Enhancement | 1 | 83 |
not getting ping alert in Spectrum | 8 | 96 |
CPU Memory parameter for checkpoint firewall | 4 | 223 |
InfoView - using User Specified Device Attributes | 6 | 1073 |
OneClick Slow Startup | 8 | 436 |
xml Based Policy Configuration | 3 | 78 |
RE: [CA Spectrum] Archive Manager / No User Problems | 5 | 1343 |
Live Health: Time Over Threshold 1120a Alarm | 5 | 268 |
Custom Column for most recent alarm occurrence time | 3 | 591 |
Spectrum ParseMap Files | 2 | 125 |
Work around for supporting RFC3020(FR-MFR-MIB) | 2 | 156 |
Is Dell PowerEdge M1000E a certified enclosure for Spectrum 9.3? | 1 | 87 |
When will Spectrum 9.3 H01 be released? | 2 | 198 |
Auto discovery | 5 | 750 |
Upgrading to Spectrum 9.3 | 11 | 746 |
ca spectrum router WAn port discovery | 3 | 168 |
SSDB load is getting failed. | 8 | 421 |
Problems monitoring huge VMWare environments | 3 | 386 |
ON LINUX - Migrate CABI/BOXI from production to development | 1 | 92 |
GC based on maintenance schedule | 9 | 596 |
Spectrum sizing tool | 6 | 1135 |
FANTASTIC Customer Produced Document regarding Correlation Condition Editor | 6 | 879 |
Riverbed Steelhead Configuration Support | 4 | 339 |
Condition Correlation of Process Down Events? | 4 | 489 |
Missing Scheduled reports | 1 | 99 |
supressed ports not included in total port cpunt | 3 | 168 |
Spectrum Network Configuration Management | 3 | 171 |
Spectrum 9.3 Key Considerations | 10 | 911 |
Number of CPU's from Solaris server... | 4 | 502 |
SystemEDGE and DB2 Insight AIM... | 6 | 609 |
ca spectrum How to discover public ip router(Internet ) | 4 | 406 |
Generating System info report | 4 | 488 |
Not getting event for log monitoring match | 11 | 853 |
CA Spectrum® r9.1.0 Japanese End of Service Announcement | 1 | 93 |
Including additional info in Event Message | 4 | 381 |
January Published Tecdocs / Technical tips / Posts to CA Spectrum Community | 1 | 147 |
Wrong port ifAdminStatus | 1 | 59 |
Brocade DCX Backbones virtual switch monitoring | 1 | 52 |
NCM Sync task issue (Script configured for device returned no configuration | 1 | 51 |
From: Dempsey, Declan
Sent: 27 February 2014 11:57
Subject: RE: January Published Tecdocs / Technical tips / Posts to CA Spectrum Community board
Hello all,
Here is a list of all tecdocs / Technical tips & posts (including updates to older posts) to CA Spectrum Community board for the previous month. Hopefully this can serve as a quick reference guide and may help with identifying some potential fixes for issues.
Newly published Tecdocs:
- TEC603943
- TEC603941
- TEC603940
- TEC604024
- TEC604025
- TEC604026
- TEC604275
- TEC604906
- TEC604895
- TEC604896
- TEC604901
- TEC605395
- TEC605396
- TEC605397
- TEC603943
- TEC604795
Technical tips / Posts to CA Spectrum Community board:
https://communities.ca.com/web/ca-ehealth-and-ca-spectrum-global-user-community/message-board/-/message_boards/category/2239493?&#p_19
Title | Posts | Views |
Any plans for MYSQL64? | 3 | 85 |
Network Services Discovery Problem | 1 | 90 |
Service desk description | 8 | 320 |
Event Procedures Spectrum 9.3 | 2 | 97 |
Alarm Notifier Not Using New Event Format File | 4 | 249 |
Service desk notification | 4 | 182 |
Ping Test | 6 | 370 |
Spectrum - discover VCenter and ESX servers but exclude VMs | 7 | 238 |
Event Reports no Results | 6 | 165 |
NCM script (Reload Cisco IOS) | 2 | 102 |
LINK UP DOWN TRAPS | 2 | 152 |
hide Maintenance tab | 3 | 224 |
Process start by event | 4 | 254 |
Best practices with Secure Domain Connector | 3 | 607 |
December Published Tecdocs / Technical tips / Posts to CA Spectrum Communit | 1 | 102 |
CA Spectrum Getting a Specific Event or Alarm With RESTFUL | 3 | 187 |
Spectrum Polling | 6 | 582 |
Change Live Link to aggregate condition status | 1 | 80 |
Integration of CA Spectrum with HP Service Manager | 2 | 297 |
CA Spectrum 9.3 installed and unable to launch OneClick administration | 13 | 379 |
Cisco Device not in a device family | 24 | 1731 |
DMVPN monitoring in Spectrum | 4 | 367 |
Gather Component Details from Command line | 2 | 131 |
CA Spectrum 9.3 SOI Connector GA Announcement | 1 | 74 |
Sysedge doesn´t work | 3 | 333 |
stopping system clearing of alarms | 2 | 218 |
Not getting any event or alarm while trying to monitor log/event. | 7 | 267 |
NetApp - Monitor the remaining available inodes | 3 | 223 |
New CA Spectrum Connector - Now GA! | 1 | 134 |
Device discovery | 3 | 163 |
Trigger new event when an existing alarm is cleared by service desk | 5 | 414 |
ServiceDesk Integration with Spectrum | 6 | 1637 |
Spectrum 9.3 H01 - Release Date | 3 | 242 |
Spectrum Server Unable to do HTTPS SPM Test | 5 | 293 |
Disable WAN components during RESTFul initiated 'Discover Connections' | 1 | 51 |
maintenance scheduling on variable dates | 5 | 252 |
SSO | 2 | 100 |
RESTFul obtain attribute enumerations | 3 | 230 |
Global Collection from policy violators | 3 | 347 |
Spectrum Host Name Connected | 2 | 141 |
Landscape list in SANM | 3 | 297 |
Web Services and Actions | 3 | 197 |
Rebooting devices with Spectrum | 3 | 128 |
Remainder Mails | 1 | 67 |
Trap not received on spectrum from DSM(SAP) tool | 3 | 177 |
OneClick Customization. Problem using renderers | 6 | 124 |
Download link for Spectrum 9.3 | 6 | 277 |
Spectrum 9.3 released and available for download | 5 | 809 |
Spectrum SSdb recovery discussion | 2 | 295 |
Spectrum - Cluster Service | 4 | 158 |
SPECTRUM-VNMDB.Lock | 2 | 191 |
SPM Custom Script? | 4 | 483 |
No Line Terminators Spectrum 9.3 ECE | 5 | 254 |
Attributes doesn't appear in Watches | 4 | 140 |
Recieve Event can I assert this to a different host? | 3 | 257 |
CA Spectrum to monitor cisco UCS | 5 | 183 |
64bit Client | 1 | 88 |
My Spectrum Alarms, Favorites, Best Practices. | 2 | 157 |
Cisco WLC event issue | 2 | 191 |
OS Performance tuning on RHEL6 | 2 | 166 |