Hi all,
I tried to configure a RTT in CA PM.
I create the following Rest Calls via POST.
<IcmpEchoRoundTripTestProfile version="1.0.0">
<Item version="1.0.0">
<Name>Example ICMP Echo Test</Name>
</Item>
<AttrGroupList>
<AttrGroup>
<ActionType>CREATE</ActionType>
<TestHost>192.**********</TestHost>
<IPDomainID>2</IPDomainID>
<TargetAddress>192.********</TargetAddress>
<Frequency>62</Frequency>
<Timeout>5000</Timeout>
<Threshold>5000</Threshold>
<Owner>tedison</Owner>
<Tag>ECHO02</Tag>
<RequestSize>40</RequestSize>
</AttrGroup>
</AttrGroupList>
</IcmpEchoRoundTripTestProfile>
and:
<HTTPRoundTripTestProfile version="1.0.0">
<Item version="1.0.0">
<Name>Http RTT</Name>
</Item>
<AttrGroupList>
<AttrGroup>
<ActionType>CREATE</ActionType>
<TestHost>192.*******</TestHost>
<IPDomainID>2</IPDomainID>
<Url>http://www.google.de</Url>
<Frequency>62</Frequency>
<Timeout>5000</Timeout>
<Threshold>5000</Threshold>
<Owner>tedison</Owner>
<Tag>ECHO02</Tag>
<Operation>1</Operation>
</AttrGroup>
</AttrGroupList>
</HTTPRoundTripTestProfile>
In TestHost and TargetAddress I have a correct IP, of course. But here I did ***.
First of all I added a SNMP Profile to set SNMP an add an device to this Profile.
Now I want to create a view. The I missing this Point in the documentation.
I think it´s the "Respsonse Tests" when I add a new Dashboard. But when I select e.g. "Top Response Tests - HTTP" or "Top Response Tests - ICMP" and save this, then I get no results. Only the Information "No Data to Display".
I had sync the data and I had rediscovered the device.
Have anybody a solution?
Thanks a lot!