Hi,
MPLS Transport Manger discovery Not happening configuration Item creation to MPLS link
We using two MPLS link. Both are connected as a following method.
Access SW -> Cisco SW -> Multiplexer -> Fiber Link -> Multiplexer-> Cisco SW -> Access SW
Cisco switch have no IP, it act as only pass through device.
Two Links are connected to Access switch with LACP Method. If one link down means network flow through another link
automatically. We able to monitor only the access switch through IP. If Cisco switch down means only access switch port will down.Otherwise access switch port will not down, if one MPLS link goes down means also.
We are got alarm when both link goes down means communication between two end stoped.
But we need, if anyone link goes down means to get alarm. If any options are available to monitor the link as per bandwidth speed or other options.
Regards,
Bala.