Automic Continuous Delivery Automation

  • Private Community

  • 1.  How to install ARA Agent and make it works as Deployment Target

    Posted Sep 21, 2016 04:30 AM
    This guide will help you to install an agent and configure it as deployment target in ARA:

    1. Go to download Center: downloads.automic.com and find the appropriate version of Agent and download.

    2. Visit the online document to know how to install an agent on different OS:


    3. Login in client 0 in User Interface of Automation Engine and make sure that the agent is up and running, it must be also assigned to the working client in ARA:

    421z1aeoqm1k.pnghttps://us.v-cdn.net/5019921/uploads/editor/eh/421z1aeoqm1k.png" width="1281">


    4. Login into ARA and go to the Release Automation --> Deployment Targets --> Create:
    s5ze3plbta67.pnghttps://us.v-cdn.net/5019921/uploads/editor/vq/s5ze3plbta67.png" width="1490">

    5. When you click on create, you can choose the type of Deployment Targets, Please make sure that you assign the Agent to the correct environment and in the Agent/Group choose the Agent you just installed.

    zy7jyzzma4y3.pnghttps://us.v-cdn.net/5019921/uploads/editor/2s/zy7jyzzma4y3.png" width="993">
    6. The credential of this agent, you can click on Settings and choose the Logins:

    Here you can create a new one Credential or edit the old one:


    Please feel free to comment here if you have any Question:


  • 2.  How to install ARA Agent and make it works as Deployment Target

    Posted Nov 21, 2016 12:31 PM
    That is nice article.

    Regarding Step-3, Is it mandatory to have Client 0 login to AE to check agent status ? I dont have client 0 access at the moment. We have configured client-2 and we uses the same for workflow design.

    Even if agent is successfully started and connection with server is fine. we can directly see agent status in ARA itself.. it may be active or inactive

    Please let me know on this.

    Thanks,
    Harshal... 


  • 3.  How to install ARA Agent and make it works as Deployment Target

    Posted Nov 24, 2016 02:16 AM
    Hi Harshal_Vaidya_8541

    In step 3, It will check to see if "AGENT_TEST" was assigned to client 100 (or not).

    In your case, you can login to the client 2, and check in the system overview to see if the agent was assigned or not.

    Best regards,
    Duong