Jeremy_Clere_7804

Upgrading with ZDU and firewall

Discussion created by Jeremy_Clere_7804 on Dec 19, 2016
If the [PORTS] section of my ucsrv.ini file looks like this:

[PORTS]
cp1=2217
cp2=2218
cp3=2219
cp4=2220
cp5=2221
wp1=2271
wp2=2272
wp3=2273
wp4=2274
wp5=2275
wp6=2276
wp7=2277
wp8=2278
wp9=2279

If I should use a different port range for the Target version, for instance like this:

[PORTS]
cp1=2222
cp2=2223
cp3=2224
cp4=2225
cp5=2226
wp1=2280
wp2=2281
wp3=2282
wp4=2283
wp5=2284
wp6=2285
wp7=2286
wp8=2287
wp9=2288

This would mean that port number 2217 is no longer used, because it was part of the "old" AE version. Therefore the CP selection which is defined in the Agents' ini file (parameter "cp=") becomes a problem because it is defined to port 2217, e.g. cp=CMD1CS0397:2217. It doesn't matter if I use IP instead of Hostname. The problem is the port number.


In case of using a firewall you might use this option: Net Area option.

You will find on this link more details:
https://docs.automic.com/documentation/webhelp/english/ALL/components/AE/11.2/All%20Guides/help.htm#ucacvz.htm?Highlight=firewall

With this option you will be able to handle 2 different networks separated with a Firewall.



Outcomes