I am trying to run ICMP (ping) tests on Cisco ASR 9006 (IOS XR). I am unable to run them even after configuring the string as read/write. I have checked the application model configuration and everything is fine.
On which model did you the read/write community string?
The make and model of the device is Cisco ASR 9006 (IOS-XR). The application model is CiscoRTTMonApp.
You stated in you description of the issue "I am unable to run them even after configuring the string as read/write.". Which model(s) did you configure the string as read/write? The error reported is "Error From Device: Failure". Have you checked the logs on the device for a specific error?
Have you tried deleting the device model and remodel from scratch using a read/write community string?
I have configured the community string (eg: abcdef) as Read/Write in ASR router. I have deleted the device from spectrum and remodeled the device with the community string (abcdef). I am unable to run the test. I have run the snmpwalk from spectroserver to device with the community string (abcdef). It was running successfully.
Can you backup and restore from the device itself? Reference https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-122-mainline/46741-backup-config.html
Hey Joseph can you tell me why do you want me to do this backup and restore thing?
There are many other engineers working on the same router. I can't do this. Please tell me what would be the cause of error?
Retrieving data ...