DX NetOps

  • Private Community

  • 1.  Want the SCP script for load the firmware using ca spectrum- cisco ios-ssh capable

    Posted Mar 14, 2019 04:05 AM

    HI All,

     

    I have tried to push the firmware using ca spectrum using tftp but it's showing error (invalid server address) and tried to capture the NCM host configuration that also showing error tftp server is may not responding or running. so tried to load using scp but it's asking the script. so anyone can share the script.

     

    Thanks,

    john.



  • 2.  Re: Want the SCP script for load the firmware using ca spectrum- cisco ios-ssh capable

    Posted Mar 14, 2019 07:43 AM

    Are you running a TFTP server on the SpectroSERVER and configured it to work with Spectrum NCM?

    Some configuration is required.

     

    The Cisco IOS SSH Capable family should work out of the box without a script needed.

     

     



  • 3.  Re: Want the SCP script for load the firmware using ca spectrum- cisco ios-ssh capable

    Posted Mar 19, 2019 02:51 AM

    Hi Matthew,

     

    Yes we are running the TFTP server in the spectrum. and uploading the image is fine but the write the configuration and reloading is not working even the upload task is showing success status. during the firmware loading we are using the boot command .

     

    Thanks,

    john.



  • 4.  Re: Want the SCP script for load the firmware using ca spectrum- cisco ios-ssh capable

    Posted Mar 19, 2019 07:33 AM

    Open a ticket with support and we will help you out!



  • 5.  Re: Want the SCP script for load the firmware using ca spectrum- cisco ios-ssh capable

    Posted Mar 21, 2019 03:51 AM

    Hi Matt,

     

    Already open the ticket in the ca support..

    01318631

     

    Thanks,

    john.



  • 6.  RE: Re: Want the SCP script for load the firmware using ca spectrum- cisco ios-ssh capable

    Posted Jan 18, 2021 01:46 PM
    Hi my bro,

    Did you slove this issue?
    Original Message