ca.portal.admin

Re:Installing the R16 SP4 maint tape

Discussion created by ca.portal.admin on Jan 24, 2007
A client has expressed interest in using the new REORG utility function
which was provided on the SP4 tape. I currently have SP2 intalled so
the next obvious question that I've been asked is what kind of effort is
required to install the SP4 maint tape? For those of you who have done
it, is it essentially just a case of getting the tape and doing the
SMP/E RECEIVE and APPLY or are there other processes involved?

Dave Embury,
IBM Global Services
01/UCY/410/WLOO
410 Albert St., Waterloo. ON N2L 3V3
Internal IBM email: Dave Embury/Ontario/IBM@IBMCA External (Internet)
email: emburyd@ca.ibm.com
Voice: (519) 880-2946 {5-2946}
Fax: (519) 746-4803

A picture is worth a thousand words but it uses up three thousand times
as much space on your hard drive.

This transmission may contain information that is privileged,
confidential and/or exempt from disclosure under applicable law. If you
are not the intended recipient, you are hereby notified that any
disclosure, copying, distribution, or use of the information contained
herein (including any reliance thereon) is STRICTLY PROHIBITED. If you
received this transmission in error, please immediately contact the
sender and destroy the material in its entirety, whether in electronic
or hard copy format.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
"Reorg and SP4, consider a BASE install instead"
"Dave,

I recommend doing an SP4 BASE install into a new CSI. Doesn't take that long and there are some advantages to this which I won't go into here. Here's what I have as far as maint. to Reorg, still haven't managed to start testing much...

QO83904 IDMSDBXD 11/15/06
QO83987 IDMSDBXD 11/29/06
QO84337 IDMSDBXD 12/11/06
QO84879 IDMSDBXD 12/27/06
T5B0056v1 IDMSDBXD (superzap) (12/28/06)
T5B0056v2 IDMSDBXD (superzap) (01/02/07)

John
Date: Tue, 23 Jan 2007 12:53:50 -0500
From: Dave Embury <emburyd@CA.IBM.COM>
Subject: Installing the R16 SP4 maint tape

A client has expressed interest in using the new REORG
utility function.

which was provided on the SP4 tape. I currently have SP2
installed so the
next obvious question that I've been asked is what kind of effort is
required to install the SP4 maint tape? For those of you who
have done it,
is it essentially just a case of getting the tape and doing the SMP/E
RECEIVE and APPLY or are there other processes involved?

Dave Embury,
IBM Global Services
===================================




Cleveland Clinic is ranked one of the top 3 hospitals in
America by U.S.News & World Report. Visit us online at
http://www.clevelandclinic.org for a complete listing of
our services, staff and locations.


Confidentiality Note: This message is intended for use
only by the individual or entity to which it is addressed
and may contain information that is privileged,
confidential, and exempt from disclosure under applicable
law. If the reader of this message is not the intended
recipient or the employee or agent responsible for
delivering the message to the intended recipient, you are
hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If
you have received this communication in error, please
contact the sender immediately and destroy the material in
its entirety, whether electronic or hard copy. Thank you.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
"Re: Reorg and SP4, consider a BASE install instead"
"I've already applied SP4 to all of my test regions, and am on the verge of
applying it to my production regions. I just did a normal maintenance
upgrade, not a base install. This was very straightforward and I did not
encounter any complications.

Therefore, I am very curious as to the advantages you mention of doing a
base install into a new CSI.

Tom Lindh
First Data Corporation
303 - 967 - 6136 (office)
303 - 508 - 6822 (pager)



""Fisher, John""
<FISHERJ@CCF.ORG>
Sent by: IDMS To
Public Discussion IDMS-L@LISTSERV.IUASSN.COM
Forum cc
<IDMS-L@LISTSERV.
IUASSN.COM> Subject
Reorg and SP4, consider a BASE
install instead
01/24/2007 08:52
AM


Please respond to
IDMS Public
Discussion Forum
<IDMS-L@LISTSERV.
IUASSN.COM>






Dave,

I recommend doing an SP4 BASE install into a new CSI. Doesn't take that
long and there are some advantages to this which I won't go into here.
Here's what I have as far as maint. to Reorg, still haven't managed to
start testing much...

QO83904 IDMSDBXD 11/15/06
QO83987 IDMSDBXD 11/29/06
QO84337 IDMSDBXD 12/11/06
QO84879 IDMSDBXD 12/27/06
T5B0056v1 IDMSDBXD (superzap) (12/28/06)
T5B0056v2 IDMSDBXD (superzap) (01/02/07)

John
Date: Tue, 23 Jan 2007 12:53:50 -0500
From: Dave Embury <emburyd@CA.IBM.COM>
Subject: Installing the R16 SP4 maint tape

A client has expressed interest in using the new REORG
utility function.

which was provided on the SP4 tape. I currently have SP2
installed so the
next obvious question that I've been asked is what kind of effort is
required to install the SP4 maint tape? For those of you who
have done it,
is it essentially just a case of getting the tape and doing the SMP/E
RECEIVE and APPLY or are there other processes involved?

Dave Embury,
IBM Global Services
===================================




Cleveland Clinic is ranked one of the top 3 hospitals in
America by U.S.News & World Report. Visit us online at
http://www.clevelandclinic.org for a complete listing of
our services, staff and locations.


Confidentiality Note: This message is intended for use
only by the individual or entity to which it is addressed
and may contain information that is privileged,
confidential, and exempt from disclosure under applicable
law. If the reader of this message is not the intended
recipient or the employee or agent responsible for
delivering the message to the intended recipient, you are
hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If
you have received this communication in error, please
contact the sender immediately and destroy the material in
its entirety, whether electronic or hard copy. Thank you.


-----------------------------------------
The information in this message may be proprietary and/or
confidential, and protected from disclosure. If the reader of this
message is not the intended recipient, or an employee or agent
responsible for delivering this message to the intended recipient,
you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have
received this communication in error, please notify First Data
immediately by replying to this message and deleting it from your
computer.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: Installing the R16 SP4 maint tape
"If your at 16.0 SP2 or SP3 I Belive you can just apply the maintenance.
I downlloaded it from CA site andd install the maint. SP4 in 2 or 3 days
(doing other things also). It's was fairly easy.

Steve Harmeson

Outcomes