ca.portal.admin

Pro's & Con's of Multiple Target and DLIB Zones in SMP/E

Discussion created by ca.portal.admin on Aug 24, 2007
Hello All:

for those of you that have installed IDMS over the years I would like to
hear your opinions regarding multiple TGT & DLIB Zones in the IDMS CSI.

Background Information, I have recently picked up a new client that has
17 Central Versions, currently they are running IDMS 16.0 SP1 and I am
going to upgrade them to SP5 to take advantage of some of the additional
features provided with SP2 and above such as High Speed Storage
Protection.

What they have in place is one CSI with one GLOBAL Zone and 17 unique
TGT & DLIB zones, one TGT & DLIB for each Central Version, but, all 17
of the Central versions are exactly the same, there is nothing specila
about one or the other, they all use the same SVC, the same RHDOPTF
(optional APAR) the same RHDCSRTT (except for the environment name) the
same RHDCUXIT, as far as I can tell there is no difference in any of the
systems.

So, I am asking your opinion of the 17 unique TGT & DLIB zones in
SMP/E.

Bill Allen
(704) 641-0296



************************************** Get a sneak peek of the all-new
AOL at http://discover.aol.com/memed/aolcom30tour
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Running JREPORTS
"Hi everyone,

I'm trying to run JREPORT 1, but I want to limit the output to a certain
task id.

Here's my input:

DATABASE DBNAME=SYSDIRL
INPUT 23476 23476 UM(CULLJRNL)
PARAM=NOLIST
JREPORT=001
SEL WHEN TYPE EQ ('ABRT' 'BGIN' 'ENDJ' 'BFOR' 'AFTR' 'AREA')
* AND TASK-ID-CV EQ (6112)

but the job abends on a SOC4:

F C700007 CULPRIT JOB CANCELLED AFTER CULL
(CONT) SYSTEM ABEND CODE= 0C4

Here's the jes log:
13.59.03 JOB10054 +SYSIDMS parms -->,ECHO=ON,
13.59.03 JOB10054 +SYSIDMS parms --> DMCL=DMCLCV20
13.59.03 JOB10054 +SYSIDMS parms --> LOADAREA=OFF
13.59.03 JOB10054 +SYSIDMS parms --> PREFETCH_BUF=9999
13.59.03 JOB10054 +SYSIDMS parms --> DICTNAME=SYSDIRL
13.59.04 JOB10054 IEA995I SYMPTOM DUMP OUTPUT 372
372 SYSTEM COMPLETION CODE=0C4 REASON CODE=00000004
372 TIME=13.59.04 SEQ=02514 CPU=0000 ASID=0035
372 PSW AT TIME OF ERROR 078D2400 00027D8A ILC 0
INTC 04
372 ACTIVE LOAD MODULE ADDRESS=0000C478
OFFSET=0001
372 NAME=CULL
372 DATA AT PSW 00027D84 - 41E0CA43 1BE84480 C3AC4680


So, I tried the following:

SEL WHEN TYPE EQ ('ABRT' 'BGIN' 'ENDJ' 'BFOR' 'AFTR' 'AREA')
* AND TASK-ID-CV EQ ('6112')

But I get the following:
SEL 00007 TASK-ID-CV EQ '6112'
E C300051 OPERANDS ARE CONFLICTING DATA TYPES



Does anyone have any ideas???
TIA,
Laura Rochon
Ajilon
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: Running JREPORTS
"I believe it is ""TASK xxxx (for TASK-CODE) and CV NUM (for your CV number), not TASK-ID-CV'

Selects only tasks with the task code or (for CA-ADS) dialog
name specified. Task-code is a 1- to 8-character task code or
dialog name. Up to 50 task codes are permitted.

Edward A. Timm
Sallie Mae, Senior Database Analyst
ETIMM@salliemae.com
(317) 596-1182
Fax (317) 595-1494
Laura Rochon <l.rochon@VIDEOTRON.CA> 09/04/2007 03:06:50 PM >>>
Hi everyone,

I'm trying to run JREPORT 1, but I want to limit the output to a certain
task id.

Here's my input:

DATABASE DBNAME=SYSDIRL
INPUT 23476 23476 UM(CULLJRNL)
PARAM=NOLIST
JREPORT=001
SEL WHEN TYPE EQ ('ABRT' 'BGIN' 'ENDJ' 'BFOR' 'AFTR' 'AREA')
* AND TASK-ID-CV EQ (6112)

but the job abends on a SOC4:

F C700007 CULPRIT JOB CANCELLED AFTER CULL
(CONT) SYSTEM ABEND CODE= 0C4

Here's the jes log:
13.59.03 JOB10054 +SYSIDMS parms -->,ECHO=ON,
13.59.03 JOB10054 +SYSIDMS parms --> DMCL=DMCLCV20
13.59.03 JOB10054 +SYSIDMS parms --> LOADAREA=OFF
13.59.03 JOB10054 +SYSIDMS parms --> PREFETCH_BUF=9999
13.59.03 JOB10054 +SYSIDMS parms --> DICTNAME=SYSDIRL
13.59.04 JOB10054 IEA995I SYMPTOM DUMP OUTPUT 372
372 SYSTEM COMPLETION CODE=0C4 REASON CODE=00000004
372 TIME=13.59.04 SEQ=02514 CPU=0000 ASID=0035
372 PSW AT TIME OF ERROR 078D2400 00027D8A ILC 0
INTC 04
372 ACTIVE LOAD MODULE ADDRESS=0000C478
OFFSET=0001
372 NAME=CULL
372 DATA AT PSW 00027D84 - 41E0CA43 1BE84480 C3AC4680


So, I tried the following:

SEL WHEN TYPE EQ ('ABRT' 'BGIN' 'ENDJ' 'BFOR' 'AFTR' 'AREA')
* AND TASK-ID-CV EQ ('6112')

But I get the following:
SEL 00007 TASK-ID-CV EQ '6112'
E C300051 OPERANDS ARE CONFLICTING DATA TYPES



Does anyone have any ideas???
TIA,
Laura Rochon
Ajilon

This E-Mail has been scanned for viruses.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: Running JREPORTS
"Hi Ed,

I'm trying to get the output for a particular task id, not a task code.
In the module 'JREPORT 001', the field is called TASK-ID-CV.

Laura

EDWARD TIMM wrote:
I believe it is ""TASK xxxx (for TASK-CODE) and CV NUM (for your CV =
number), not TASK-ID-CV' =20
=20
Selects only tasks with the task code or (for CA-ADS) dialog =20
name specified. Task-code is a 1- to 8-character task code or =20
dialog name. Up to 50 task codes are permitted. =20
=20
Edward A. Timm
Sallie Mae, Senior Database Analyst
ETIMM@salliemae.com
(317) 596-1182=20
Fax (317) 595-1494

Laura Rochon <l.rochon@VIDEOTRON.CA> 09/04/2007 03:06:50 PM >>>
Hi everyone,

I'm trying to run JREPORT 1, but I want to limit the output to a certain
task id.

Here's my input:

DATABASE DBNAME=3DSYSDIRL
INPUT 23476 23476 UM(CULLJRNL)
PARAM=3DNOLIST
JREPORT=3D001
SEL WHEN TYPE EQ ('ABRT' 'BGIN' 'ENDJ' 'BFOR' 'AFTR' 'AREA')
* AND TASK-ID-CV EQ (6112)

but the job abends on a SOC4:

F C700007 CULPRIT JOB CANCELLED AFTER CULL
(CONT) SYSTEM ABEND CODE=3D 0C4

Here's the jes log:
13.59.03 JOB10054 +SYSIDMS parms -->,ECHO=3DON,
13.59.03 JOB10054 +SYSIDMS parms --> DMCL=3DDMCLCV20
13.59.03 JOB10054 +SYSIDMS parms --> LOADAREA=3DOFF
13.59.03 JOB10054 +SYSIDMS parms --> PREFETCH_BUF=3D9999
13.59.03 JOB10054 +SYSIDMS parms --> DICTNAME=3DSYSDIRL
13.59.04 JOB10054 IEA995I SYMPTOM DUMP OUTPUT 372
372 SYSTEM COMPLETION CODE=3D0C4 REASON CODE=3D00000004
372 TIME=3D13.59.04 SEQ=3D02514 CPU=3D0000 ASID=3D0035
372 PSW AT TIME OF ERROR 078D2400 00027D8A ILC 0
INTC 04
372 ACTIVE LOAD MODULE ADDRESS=3D0000C478
OFFSET=3D0001
372 NAME=3DCULL
372 DATA AT PSW 00027D84 - 41E0CA43 1BE84480 C3AC4680


So, I tried the following:

SEL WHEN TYPE EQ ('ABRT' 'BGIN' 'ENDJ' 'BFOR' 'AFTR' 'AREA')
* AND TASK-ID-CV EQ ('6112')

But I get the following:
SEL 00007 TASK-ID-CV EQ '6112'
E C300051 OPERANDS ARE CONFLICTING DATA TYPES



Does anyone have any ideas???
TIA,
Laura Rochon
Ajilon

This E-Mail has been scanned for viruses.

"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: Running JREPORTS
"When I run JREPORTS, I do something like this:

SELECT WHEN TYPE EQ ('BGIN' 'BFOR' 'AFTR' 'COMT' 'ENDJ' 'ABRT')
* AND TRANSACT-ID EQ ( 7879 )

Note that there are spaces around the 7879.

Maybe this is the same for TASK-ID-CV, or TASK-ID-CV should no longer be
used for this function.

Dick

Richard Pierce
(617) 973-8911
richard.pierce@state.ma.us

Outcomes