We just migrated to R16 and one of our customers are having problems
with 2 of their assembler programs. They are named DBHASH (which I
think came from the old Boxes and Arrow magazine) and the other is a
user program invoked by the task code USERSTAT which we think came from
one of the CA User Conferences. Is anyone familiar with and/or using
either of these in a R16 environment? If so, did you have to do anything
other than relink them when you migrated?
Jim Irwin
Database Technical Support
non impediti ratione congitatonis
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP
Normal
Normal
once again I must sing the praises of CA IDMS support
"picture if you will:
i roll in the 17.0 required SVC into a testing environment
the next day - we start detecting storage overlays
i send the info to CA - they provide a trap - i apply the trap - get an
SVC dump,
and CA immediately replied back with definitive proof that this is an
application-caused storage overlay (multiple program from within the same
transaction, so storage protect would not help)
provided with all this information, the development teams replied - this
storage overlay is due to the new SVC !!!!! (unbelievable)
so ....since i appear to be guilty until proven innocent, i back out the
17.0 SVC and replaced it with the 15.0 SVC
and yet --- the storage overlay remains ..... oddly enough i have not
heard from development since passing this information along...
but i did want to publicly thank Brian Brendlinger for his quick and
complete response to what obviously was NOT a IDMS system software or
configuration issue, but a development issue (obvious to everyone EXCEPT
development)
Chris Hoelscher
Senior IDMS & DB2 Database Administrator
Humana Inc
502-476-2538
choelscher@humana.com
The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
"
IDMS 3rd-party providers forum
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
IDMSVENDOR-L@LISTSERV.IUASSN.COM
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
Normal
Normal
once again I must sing the praises of CA IDMS support
"picture if you will:
i roll in the 17.0 required SVC into a testing environment
the next day - we start detecting storage overlays
i send the info to CA - they provide a trap - i apply the trap - get an
SVC dump,
and CA immediately replied back with definitive proof that this is an
application-caused storage overlay (multiple program from within the same
transaction, so storage protect would not help)
provided with all this information, the development teams replied - this
storage overlay is due to the new SVC !!!!! (unbelievable)
so ....since i appear to be guilty until proven innocent, i back out the
17.0 SVC and replaced it with the 15.0 SVC
and yet --- the storage overlay remains ..... oddly enough i have not
heard from development since passing this information along...
but i did want to publicly thank Brian Brendlinger for his quick and
complete response to what obviously was NOT a IDMS system software or
configuration issue, but a development issue (obvious to everyone EXCEPT
development)
Chris Hoelscher
Senior IDMS & DB2 Database Administrator
Humana Inc
502-476-2538
choelscher@humana.com
The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP
Normal
Normal
does anyone remember why ?
"you would want to load Loads RHDCCKUR and RHDCTCKR from steplib? i have
some CVs set that way from long ago (that I am only now fully in control
of) and i was hoping to change it if there was no longer a valid reason
Chris Hoelscher
Senior IDMS & DB2 Database Administrator
Humana Inc
502-476-2538
choelscher@humana.com
The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
"
IDMS 3rd-party providers forum
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
IDMSVENDOR-L@LISTSERV.IUASSN.COM
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
Normal
Normal
does anyone remember why ?
"you would want to load Loads RHDCCKUR and RHDCTCKR from steplib? i have
some CVs set that way from long ago (that I am only now fully in control
of) and i was hoping to change it if there was no longer a valid reason
Chris Hoelscher
Senior IDMS & DB2 Database Administrator
Humana Inc
502-476-2538
choelscher@humana.com
The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP
Normal
Normal
does anyone remember why ? (i should have added)
"i understand the issue with allowuserkeycsa(no) - but before that was an
issue - why?
thanks
The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
"
IDMS 3rd-party providers forum
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
IDMSVENDOR-L@LISTSERV.IUASSN.COM
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
Normal
Normal
does anyone remember why ? (i should have added)
"i understand the issue with allowuserkeycsa(no) - but before that was an
issue - why?
thanks
The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP
Normal
Normal
Re: does anyone remember why ?
"Yes.
If you are running under z/OS 1.9 and have to change which storage key
IDMS runs in!
Long thread on this last year. We are about to upgrade to 1.9 and I am
having to follow the CA instructions to run from steplib.
It is not hard to set up, but it changes all of my startup procs.
The instructions are in ptf QI82743.=20
Jim
Jim Rice
jlrice@southernco.com
ph (404) 506-4148
Fax (404) 506- 4870
SO Linc 2988/770.550.2988
This e-mail and any of its attachments may contain proprietary Southern
Company and/or affiliate information that is privileged, confidential,
or protected by copyright belonging to Southern Company and/or its
affiliates. This e-mail is intended solely for the use of the
individual or entity for which it is intended. If you are not the
intended recipient of this e-mail, any dissemination, distribution,
copying, or action taken in relation to the contents of and attachments
to this e-mail is contrary to the rights of Southern Company and/or its
affiliates and is prohibited. If you are not the intended recipient of
this e-mail, please notify the sender immediately by return e-mail and
permanently delete the original and any copy or printout of this e-mail
and any attachments. Thank you. =20