ca.portal.admin

Re:Sub area occupancy stats

Discussion created by ca.portal.admin on Feb 23, 2010
Hi all,
Some months ago I remember a thread relating to calculating the area
occupancy of IDMS sub areas. Can anyone please tell me how this was
done? I believe a culprit report was involved.
Many thanks in anticipation,
Geoff Wheeler
Tyco Electronics

This email originates from AXA PPP healthcare group plc (reg. no.
3148346), which is a service company for AXA PPP healthcare limited
(reg. no. 3148119) and AXA PPP Healthcare Administration Services
Limited (reg. no. 3429917)

All of the above mentioned companies are registered in England and
have their registered office at 5 Old Broad Street, London EC2N 1AD,
England.

AXA PPP healthcare provides private medical insurance in the UK and
worldwide. We also insure leisure and business travel, provide dental
care, and cater for companies' occupational health and counselling
requirements. Call us on 0845 600 6722 or visit
http://www.axappphealthcare.co.uk for more information.

AXA PPP healthcare is authorised and regulated by the Financial
Services Authority and is a recognised insurer in Guernsey. Authorised
and regulated by the Financial Services Authority in respect of private
medical insurance and travel. AXA PPP healthcare is also a Category A
permit holder in Jersey This message and any files transmitted with it
are confidential and intended solely for the individual or entity to whom
they are addressed. If you have received this in error, you should not
disseminate or copy this email. Please notify the sender immediately
and delete this email from your system.

Please also note that any opinions presented in this email are solely
those of the author and do not necessarily represent those of The AXA
UK Plc Group.

Email transmission cannot be guaranteed to be secure, or error free as
information could be intercepted, corrupted, lost, destroyed, late in
arriving or incomplete as a result of the transmission process. The
sender therefore does not accept liability for any errors or omissions in
the contents of this message which arise as a result of email
transmission.

Finally, the recipient should check this email and any attachments for
viruses. The AXA UK Plc Group accept no liability for any damage
caused by any virus transmitted by this email.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: Sub area occupancy stats
"Release 17 has a subarea option on its PRINT SPACE command - i skipped 16
so i do not know if this was introduced at that release .....

Chris Hoelscher
IDMS/DB2 Database Architect
Humana Inc
502-476-2538
choelscher@humana.com

you only need to test the programs that you want to work correctly




The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
"
IDMS 3rd-party providers forum
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
IDMSVENDOR-L@LISTSERV.IUASSN.COM
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: [IDMSVENDOR-L] Sub area occupancy stats
"Release 17 has a subarea option on its PRINT SPACE command - i skipped 16
so i do not know if this was introduced at that release .....

Chris Hoelscher
IDMS/DB2 Database Architect
Humana Inc
502-476-2538
choelscher@humana.com

you only need to test the programs that you want to work correctly




The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: PREALERT
"The following was extracted from the ASG-PreAlert/IDMS user's guide:

IDMSABND
Select the IDMSABND screen from the IDMS Additional Features Menu (on the
IDMSM6 screen). The IDMSABND screen allows you to abend an active task by
using the IVRY line command.

Figure 92 * IDMSABND screen

COMMAND: IDMSABND 14:02:05.3 93.060 108.68% .TUT FOR TUTORIAL
IDMS IDMSDC1 V1 IDMS INTERFACE ACTIVE TASKS: 21 5.17/SEC . This screen is
used to Abend an active task.
ATSL TYP=UE,REP=N
ATID 102900 102899 102881 102898
ATCD ADS2 ADS2 ERUS ADS2
ATPN ADSOMAIN ADSOMAIN PACCU245 ADSOMAIN ====
=======================================================================
. Enter TID=nnn,CAN=Y to cancel a task, nnn is the task id (ATID).
IVRY
.
. The IVRY cancel task function sets the TCERQAB bit in the Task Control .
Element (TCE) for the task. This bit is interrogated by the IDMS .
dispatcher to Abend the task. If IDMS is in a tight loop and the .
dispatcher is not being entered, the task may not be abended.
.
These line commands are used with the IDMSABND screen:
Line Commands Description
IDMS PreAlert Interface
ATSL Active Task Selection Keywords
ATID Active Task ID
ATCD Task Code
ATPN Program Name
==== Line Separator / Auto-repeat
IVRY IDMS Vary Line Command

The TID= and CAN= keywords are used with the IVRY line command to set the
TCERQAB bit in the TCE for the specified task ID. This requests that the
task be abended. Occasionally, CAN=1 or CAN=2 may be required to set the
TCEABIN or TCERNWY bits in the TCE.


IDMS Vary Line command
The IVRY line command dynamically varies selected elements within the CV.
IVRY cancels an active task, changes the priority for an active task or task
definition, or enables/disables a task or program definitions.

The CANCEL TASK function sets the bit (either TCERQAB, TCEABIN, or
TCERNWY) in the Task Control Element (TCE) for the active task. The value of
the CAN= keyword determines which bit is set. These bits are interrogated by
the IDMS dispatcher in determining whether or not to abend the task. In most
cases the CAN=Y function to set the TCERQAB bit causes a task to be
cancelled. Occasionally, the CAN=1 or CAN=2 functions (to set the TCEABIN or
TCERNWY bits) may be required to cancel the task. If IDMS is in a tight loop
and the dispatcher is not being entered, the task may not be abended.

When you use the CAN=Y option to request a task abend, PreAlert will set the
task abend code in the TCEEXABC field. The default abend code is specified
in the userdata IABCODE keyword. You can override the default using the
ACD=xxxx keyword with the IVRY line command.

PreAlert may suppress the abend request when certain bits are set in the
TCE. If the abend request, PreAlert displays ABEND REQUEST SUPPRESSED with a
reason code appended to the message:
ABNDM The task is currently abending. PreAlert will not request an abend for
a task that is already abending.
NABNM The TCENABN flag has been set for the task. This flag indicates DON'T
ALLOW ABEND IF ON.
ARBKM The task is currently performing rollback processing. PreAlert will
not request an abend for a task performing rollback processing.

The TCENABNM check may be suppressed by using the SUP=NABNM keyword.
When the priority of an active task is changed, IDMS does not change its
position on the dispatching queue. Any new tasks created are placed in the
dispatching queue, either above or below this task, depending on the new
dispatching priority. As existing tasks end and new tasks are created, the
position on the dispatching queue is adjusted accordingly.


When the priority is changed for a task definition, the actual dispatching
priority may be different since the priorities from the user and the logical
terminal are included in the dispatching priority. Following are the
keywords for this command along with keyword combinations.


Keyword Function
TID=nnn Active Task ID
TCD=taskcode Task code for Task Definition PGM=program Program name for
Program Definition CAN=Y Request abend, TCERQAB bit
CAN=1 Request abend, TCEABIN bit
CAN=2 Request abend, TCERNWY bit
SUP=NABNM Suppress TCENABNM check.
PRI=nnn Reset Priority
ENA=Y|N Enable (Y) or Disable (N)
ACD=xxxx Specify abend code, up to 4 characters

Valid Keyword Combinations:
TID=nnnn,CAN=x Cancel an active task
TID=nnnn,CAN=x,SUP=NABNM Cancel an active task, suppress TCENABNM check
TID=nnn, PRI=nnn Reset active task dispatching priority TCD=taskcode,
PRI=nnn Reset task definition priority TCD=taskcode, ENA=Y|N Enable or
disable a task definition PGM=program, ENA=Y|N Enable or disable a program
definition TID=nnnn,CAN=x,ACD=xxxx Cancel an active task and specify the
abend code.
TID=nnnn,CAN=x,SUP=NABNM,ACD=xxxx Cancel an active task, suppress the
TCENABNM check and specify the abend code.


IDMS (jobname) V1 IDMS INTERFACE ACTIVE TASKS: 21 1.41/SEC ATSL TYP=UE
ATID 723 4163 4177 4178 4179
ATCD OPER T023B T011A T009A T018B
==== =======================================================================
IVRY TID=4163,CAN=Y
+ TASK ID 4163 ABEND REQUESTED

Outcomes