ca.portal.admin

Re:Re: Deadlock Victims List: with Prog, Area, Data

Discussion created by ca.portal.admin on Nov 28, 2008
Hello.

I am new to IDMS , I have got a clarification, is it possible to put
IDMS DML statements in a cobol copy book? This copybook should be used
in procedure division?

Regards,

Rajeev V
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Great report on CA World !
"Steve,=20

=20

Thanks for your report on CA World.=20

=20

I want to thank you and the other IUA board members for your hard work
to help organize a successful conference and carve out a place for the
worldwide IDMS community to meet. =20

=20

=20

Nigel Salway

Senior Analyst

1900 Albert Street

Regina, SK S4P 4K8

Telephone: (306) 761-4063 =20

Fax: (306) 761-4141 =20

=20

CONFIDENTIALITY NOTICE: Proprietary/Confidential Information belonging
to CGI Group Inc. and its affiliates may be contained in this message.
If you are not a recipient indicated or intended in this message (or
responsible for delivery of this message to such person), or you think
for any reason that this message may have been addressed to you in
error, you may not use or copy or deliver this message to anyone else.
In such case, you should destroy this message and are asked to notify
the sender by reply email.

=20
"
IDMS 3rd-party providers forum
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
IDMSVENDOR-L@LISTSERV.IUASSN.COM
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Great report on CA World !
"Steve,



Thanks for your report on CA World.



I want to thank you and the other IUA board members for your hard work
to help organize a successful conference and carve out a place for the
worldwide IDMS community to meet.





Nigel Salway

Senior Analyst

1900 Albert Street

Regina, SK S4P 4K8

Telephone: (306) 761-4063

Fax: (306) 761-4141



CONFIDENTIALITY NOTICE: Proprietary/Confidential Information belonging
to CGI Group Inc. and its affiliates may be contained in this message.
If you are not a recipient indicated or intended in this message (or
responsible for delivery of this message to such person), or you think
for any reason that this message may have been addressed to you in
error, you may not use or copy or deliver this message to anyone else.
In such case, you should destroy this message and are asked to notify
the sender by reply email.


"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
CAS 3.0 1099 Processing
"Hello All CAS Users:



Is anyone aware of any changes to the 2008 1099 processing for CAS 3.0
users?



William M. Allen, Jr.

ARCH Consulting Associates, Ltd.

(704) 641-0296
"
IDMS 3rd-party providers forum
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
IDMSVENDOR-L@LISTSERV.IUASSN.COM
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
CAS 3.0 1099 Processing
"Hello All CAS Users:



Is anyone aware of any changes to the 2008 1099 processing for CAS 3.0
users?



William M. Allen, Jr.

ARCH Consulting Associates, Ltd.

(704) 641-0296
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Separate WTOEXIT
"I'm trying to get my shiny new 17.0 system to load a separate WTOEXIT =
with the WTO=3DWTOEXIT parameter. I can't get it to work. It always says =
that the module is not found. Any tips?
=20
______________________________________________________________
=20
Chris Trayler, IXD
Bank Julius Baer & Co. Ltd.
P. O. Box, CH-8010 Z=FCrich, Switzerland
Telephone +41 (0)58 887 4332, Fax +41 (0)58 887 4969
www.juliusbaer.com <http://www.juliusbaer.com/>=20
=20
______________________________________________________________
=20
*****JuliusBaer Disclaimer***** This e-mail is for the intended =
recipient only and may contain confidential or privileged information. =
If you have received this e-mail by mistake, please contact us =
immediately and completely delete it (and any attachments) and do not =
forward it or inform any other person of its contents. If you send us =
messages by e-mail, we take this as your authorization to correspond =
with you by e-mail, however, we will not accept the electronic =
transmission of orders/instructions without a specific agreement being =
in place to govern the same. If you do not wish to receive any further =
e-mail correspondence please let us know. E-mail transmission cannot be =
guaranteed to be secure or error-free as information could be =
intercepted, amended, corrupted, lost, destroyed, arrive late or =
incomplete, or contain viruses. Neither the Julius Baer Group nor the =
sender accept liability for any errors or omissions in the content of =
this message which arise as a result of its e-mail transmission. Please =
note that all e-mail communications to and from the Julius Baer Group =
may be monitored. This communication is for informational purposes only. =
It is not intended as an offer or solicitation for the purchase or sale =
of any financial instrument or as an official confirmation of any =
transaction.
"
IDMS 3rd-party providers forum
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
IDMSVENDOR-L@LISTSERV.IUASSN.COM
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Separate WTOEXIT
"I'm trying to get my shiny new 17.0 system to load a separate WTOEXIT with the WTO=WTOEXIT parameter. I can't get it to work. It always says that the module is not found. Any tips?

______________________________________________________________

Chris Trayler, IXD
Bank Julius Baer & Co. Ltd.
P. O. Box, CH-8010 Zürich, Switzerland
Telephone +41 (0)58 887 4332, Fax +41 (0)58 887 4969
www.juliusbaer.com <http://www.juliusbaer.com/>

______________________________________________________________

*****JuliusBaer Disclaimer***** This e-mail is for the intended recipient only and may contain confidential or privileged information. If you have received this e-mail by mistake, please contact us immediately and completely delete it (and any attachments) and do not forward it or inform any other person of its contents. If you send us messages by e-mail, we take this as your authorization to correspond with you by e-mail, however, we will not accept the electronic transmission of orders/instructions without a specific agreement being in place to govern the same. If you do not wish to receive any further e-mail correspondence please let us know. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, amended, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Neither the Julius Baer Group nor the sender accept liability for any errors or omissions in the content of this message which arise as a result of its e-mail transmission. Please note that all e-mail communications to and from the Julius Baer Group may be monitored. This communication is for informational purposes only. It is not intended as an offer or solicitation for the purchase or sale of any financial instrument or as an official confirmation of any transaction.
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: Separate WTOEXIT
"Chris,
=20
Is the load library the exit is in in the Steplib concatenation? =20
=20
Bob Wiklund
Tiburon Technologies
623 594-6022

________________________________

From: IDMS 3rd-party providers forum on behalf of Trayler, Christopher
Sent: Tue 12/2/2008 9:43 AM
To: IDMSVENDOR-L@LISTSERV.IUASSN.COM
Subject: Separate WTOEXIT



I'm trying to get my shiny new 17.0 system to load a separate WTOEXIT =
=3D
with the WTO=3D3DWTOEXIT parameter. I can't get it to work. It always =
says =3D
that the module is not found. Any tips?
=3D20
______________________________________________________________
=3D20
Chris Trayler, IXD
Bank Julius Baer & Co. Ltd.
P. O. Box, CH-8010 Z=3DFCrich, Switzerland
Telephone +41 (0)58 887 4332, Fax +41 (0)58 887 4969
www.juliusbaer.com <http://www.juliusbaer.com/>=3D20
=3D20
______________________________________________________________
=3D20
*****JuliusBaer Disclaimer***** This e-mail is for the intended =3D
recipient only and may contain confidential or privileged information. =
=3D
If you have received this e-mail by mistake, please contact us =3D
immediately and completely delete it (and any attachments) and do not =
=3D
forward it or inform any other person of its contents. If you send us =
=3D
messages by e-mail, we take this as your authorization to correspond =3D
with you by e-mail, however, we will not accept the electronic =3D
transmission of orders/instructions without a specific agreement being =
=3D
in place to govern the same. If you do not wish to receive any further =
=3D
e-mail correspondence please let us know. E-mail transmission cannot be =
=3D
guaranteed to be secure or error-free as information could be =3D
intercepted, amended, corrupted, lost, destroyed, arrive late or =3D
incomplete, or contain viruses. Neither the Julius Baer Group nor the =
=3D
sender accept liability for any errors or omissions in the content of =
=3D
this message which arise as a result of its e-mail transmission. Please =
=3D
note that all e-mail communications to and from the Julius Baer Group =
=3D
may be monitored. This communication is for informational purposes only. =
=3D
It is not intended as an offer or solicitation for the purchase or sale =
=3D
of any financial instrument or as an official confirmation of any =3D
transaction.

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
"
IDMS 3rd-party providers forum
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP
IDMSVENDOR-L@LISTSERV.IUASSN.COM
IDMSVENDOR-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: Separate WTOEXIT
"Chris,

Is the load library the exit is in in the Steplib concatenation?

Bob Wiklund
Tiburon Technologies
623 594-6022

________________________________

From: IDMS 3rd-party providers forum on behalf of Trayler, Christopher
Sent: Tue 12/2/2008 9:43 AM
To: IDMSVENDOR-L@LISTSERV.IUASSN.COM
Subject: Separate WTOEXIT



I'm trying to get my shiny new 17.0 system to load a separate WTOEXIT =
with the WTO=3DWTOEXIT parameter. I can't get it to work. It always says =
that the module is not found. Any tips?
=20
______________________________________________________________
=20
Chris Trayler, IXD
Bank Julius Baer & Co. Ltd.
P. O. Box, CH-8010 Z=FCrich, Switzerland
Telephone +41 (0)58 887 4332, Fax +41 (0)58 887 4969
www.juliusbaer.com <http://www.juliusbaer.com/>=20
=20
______________________________________________________________
=20
*****JuliusBaer Disclaimer***** This e-mail is for the intended =
recipient only and may contain confidential or privileged information. =
If you have received this e-mail by mistake, please contact us =
immediately and completely delete it (and any attachments) and do not =
forward it or inform any other person of its contents. If you send us =
messages by e-mail, we take this as your authorization to correspond =
with you by e-mail, however, we will not accept the electronic =
transmission of orders/instructions without a specific agreement being =
in place to govern the same. If you do not wish to receive any further =
e-mail correspondence please let us know. E-mail transmission cannot be =
guaranteed to be secure or error-free as information could be =
intercepted, amended, corrupted, lost, destroyed, arrive late or =
incomplete, or contain viruses. Neither the Julius Baer Group nor the =
sender accept liability for any errors or omissions in the content of =
this message which arise as a result of its e-mail transmission. Please =
note that all e-mail communications to and from the Julius Baer Group =
may be monitored. This communication is for informational purposes only. =
It is not intended as an offer or solicitation for the purchase or sale =
of any financial instrument or as an official confirmation of any =
transaction.

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
"
IDMS Public Discussion Forum
IDMS-L@LISTSERV.IUASSN.COM
SMTP
IDMS-L@LISTSERV.IUASSN.COM
IDMS-L@LISTSERV.IUASSN.COM
SMTP








Normal

Normal
Re: Separate WTOEXIT
"Chris. It has to be one of two possibilities.
1) The LOAD module must be named WTOEXIT if your parm says WTO=3DWTOEXIT
2) The loadlib containing module WTOEXIT must be in the STEPLIB =
concatenation.

3?- If you get online and do a LOOK PROGRAM=3DWTOEXIT it will tell you =
what DSN (loadlib) it was loaded from. That MUST be in the STEPLIB =
concatenation.

Ed McKinney
CA-IDMS=20

Outcomes